From: Florian Fainelli <f.fainelli@gmail.com>
To: Beniamino Galvani <b.galvani@gmail.com>,
"David S. Miller" <davem@davemloft.net>
Cc: "Romain Perier" <romain.perier@gmail.com>,
"Heiko Stübner" <heiko@sntech.de>,
"Arnd Bergmann" <arnd@arndb.de>,
"Tobias Klauser" <tklauser@distanz.ch>,
"Jingoo Han" <jg1.han@samsung.com>,
"Max Schwarz" <max.schwarz@online.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] net: arc_emac: enable tx interrupts
Date: Thu, 11 Sep 2014 10:24:33 -0700 [thread overview]
Message-ID: <5411DAD1.7060507@gmail.com> (raw)
In-Reply-To: <1410382203-10395-2-git-send-email-b.galvani@gmail.com>
On 09/10/2014 01:50 PM, Beniamino Galvani wrote:
> In the current implementation the cleaning of tx ring is done by the
> NAPI poll handler, which is scheduled after rx interrupts. Thus, in
> absence of received packets the reclaim of used tx buffers is never
> executed, blocking further transmission.
>
> This can be easily reproduced starting the transmission of a UDP flow
> with iperf, which blocks almost immediately because skbs are not
> returned to the stack and the socket send buffer becomes full.
>
> The patch enables tx interrupts so that the tx reclaim is scheduled
> after completed transmissions.
Based on what the driver does and how TX reclaim is performed, your fix
makes complete sense to me.
>
> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/net/ethernet/arc/emac_main.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
> index dbea847..1d08f63 100644
> --- a/drivers/net/ethernet/arc/emac_main.c
> +++ b/drivers/net/ethernet/arc/emac_main.c
> @@ -300,7 +300,7 @@ static int arc_emac_poll(struct napi_struct *napi, int budget)
> work_done = arc_emac_rx(ndev, budget);
> if (work_done < budget) {
> napi_complete(napi);
> - arc_reg_or(priv, R_ENABLE, RXINT_MASK);
> + arc_reg_or(priv, R_ENABLE, RXINT_MASK | TXINT_MASK);
> }
>
> return work_done;
> @@ -329,9 +329,9 @@ static irqreturn_t arc_emac_intr(int irq, void *dev_instance)
> /* Reset all flags except "MDIO complete" */
> arc_reg_set(priv, R_STATUS, status);
>
> - if (status & RXINT_MASK) {
> + if (status & (RXINT_MASK | TXINT_MASK)) {
> if (likely(napi_schedule_prep(&priv->napi))) {
> - arc_reg_clr(priv, R_ENABLE, RXINT_MASK);
> + arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK);
> __napi_schedule(&priv->napi);
> }
> }
> @@ -442,7 +442,7 @@ static int arc_emac_open(struct net_device *ndev)
> arc_reg_set(priv, R_TX_RING, (unsigned int)priv->txbd_dma);
>
> /* Enable interrupts */
> - arc_reg_set(priv, R_ENABLE, RXINT_MASK | ERR_MASK);
> + arc_reg_set(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK);
>
> /* Set CONTROL */
> arc_reg_set(priv, R_CTRL,
> @@ -513,7 +513,7 @@ static int arc_emac_stop(struct net_device *ndev)
> netif_stop_queue(ndev);
>
> /* Disable interrupts */
> - arc_reg_clr(priv, R_ENABLE, RXINT_MASK | ERR_MASK);
> + arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK);
>
> /* Disable EMAC */
> arc_reg_clr(priv, R_CTRL, EN_MASK);
>
next prev parent reply other threads:[~2014-09-11 17:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 20:50 [PATCH v2 0/2] net: arc_emac: fix tx issues Beniamino Galvani
2014-09-10 20:50 ` [PATCH v2 1/2] net: arc_emac: enable tx interrupts Beniamino Galvani
2014-09-11 17:24 ` Florian Fainelli [this message]
2014-09-10 20:50 ` [PATCH v2 2/2] net: arc_emac: prevent reuse of unreclaimed tx descriptors Beniamino Galvani
2014-09-12 21:19 ` [PATCH v2 0/2] net: arc_emac: fix tx issues David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5411DAD1.7060507@gmail.com \
--to=f.fainelli@gmail.com \
--cc=arnd@arndb.de \
--cc=b.galvani@gmail.com \
--cc=davem@davemloft.net \
--cc=heiko@sntech.de \
--cc=jg1.han@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=max.schwarz@online.de \
--cc=netdev@vger.kernel.org \
--cc=romain.perier@gmail.com \
--cc=tklauser@distanz.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.