Re: [linux-lvm] LVM and I/O block size (max_sectors_kb)

[Marian Csontos <mcsontos@redhat.com>]

On 09/11/2014 03:49 PM, Gionatan Danti wrote:
>> Hi all,
>> it seems that, when using LVM, I/O block transfer size has an hard
>> limit at about 512 KB/iop. Large I/O transfers can be crucial for
>> performance, so I am trying to understand if I can change that.
>>
>> Some info: uname -a (CentOS 6.5 x86_64)
>> Linux blackhole.assyoma.it 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun
>> 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
>>
>> From my understanding, maximum I/O block size for physical device can
>> be tuned from /sys/block/sdX/queue/max_sectors_kb.
>>
>> Some quick iostat -k -x 1 show that, for physical device, the tunable
>> works:
>>
>> # max_sectors_kb=512 (default)
>> dd if=/dev/zero of=/dev/sdd1 bs=2M count=16 oflag=direct
>> iostat -x -k 1 /dev/sdd: avgrq-sz=1024 (1024 sectors = 512KB =
>> max_sectors_kb)
>>
>> # max_sectors_kb=2048
>> dd if=/dev/zero of=/dev/sdd1 bs=2M count=16 oflag=direct
>> iostat -x -k 1 /dev/sdd: avgrq-sz=2048 (2048 sectors = 1024 KB)
>>
>> dd if=/dev/zero of=/dev/sdd1 bs=4M count=16 oflag=direct
>> iostat -x -k 1 /dev/sdd: avgrq-sz=2730.67 (2730 sectors = ~1350 KB)
>>
>> As you can see, I can't always reach 100% efficienty but I came
>> reasonably close.
>>
>>
>> The problem is that, when using LVM2 (on software raid10), I can not
>> really increase I/O transfer size. Setting both sd*, md* and dm-* to
>> max_sectors_kb=2048 leads to _no_ increase in I/O blocks, while
>> decreasing the max_sectors_kb works properly:
>>
>> # max_sectors_kb=2048
>> dd if=/dev/zero of=/dev/vg_kvm/TEST bs=2M count=64 oflag=direct
>> iostat -x -k 1 /dev/vg_kvm/TEST: avgrq-sz=1024.00 (it remains as 512KB)
>>
>> # max_sectors_kb=256
>> dd if=/dev/zero of=/dev/vg_kvm/TEST bs=2M count=64 oflag=direct
>> iostat -x -k 1 /dev/vg_kvm/TEST: avgrq-sz=512.00 (512 sectors = 256KB
>> = max_sectors_kb)
>>
>> Now, two questions:
>> 1) why I see this hard limit?

1. As there are more disks in the VG, can them all work with larger 
max_sectors_kb?

2. Does it work for md device without stacking LVM on top of that?

3. What's your Physical extent size?

     vgs -ovg_extent_size vg_kvm # or simple vgs -v

4. If all above is fine then it may be related to LVM.

-- Marian

>> 2) can I change this behavior?
>>
>> Thank you very much.
>
> Hi all,
> sorry for bumping up this thread.
>
> Anyone has an explanation for what I see? I am missing something?
>
> Thanks.
>