From: Gary Thomas <gary@mlbassoc.com>
To: yocto@yoctoproject.org
Subject: Re: Basic build fails
Date: Sat, 13 Sep 2014 05:48:50 -0600 [thread overview]
Message-ID: <54142F22.6070101@mlbassoc.com> (raw)
In-Reply-To: <5413C4E3.4060102@gmail.com>
On 2014-09-12 22:15, Arun Kumar wrote:
> Thanks for the reply ross, but the build noise is too much form me to put it in here. I will post the last few lines of which i can make some sense, but the rest is somewhat incomprehensible.
>
> /-------------------------------------------------------------------------------
> | make[1]: *** [s-attrtab] Killed
This is very suspicious - looks like your build may have been killed by running
out of memory...
> | make[1]: *** Waiting for unfinished jobs....
> | make[1]: Leaving directory `/home/arun/Documents/Dev/yocto/tmp/work/x86_64-poky-linux/gcc-cross-i586/4.9.1-r0/gcc-4.9.1/build.x86_64-linux.i586-poky-linux/gcc'
> | make: *** [all-gcc] Error 2
> | ERROR: oe_runmake failed
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_compile (log file is located at /home/arun/Documents/Dev/yocto/build/../tmp/work/x86_64-poky-linux/gcc-cross-i586/4.9.1-r0/temp/log.do_compile.29857)
> ERROR: Task 595 (/home/arun/Documents/Dev/yocto/poky/meta/recipes-devtools/gcc/gcc-cross_4.9.bb, do_compile) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 2729 tasks of which 2728 didn't need to be rerun and 1 failed.
> No currently running tasks (307 of 5634)
>
> Summary: 1 task failed:
> /home/arun/Documents/Dev/yocto/poky/meta/recipes-devtools/gcc/gcc-cross_4.9.bb, do_compile
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> /-------------------------------------------------------------------------------------------------------
>
> here is the pastebin link to the whole error http://pastebin.com/Y1JsA8dt
> hope this helps
How much memory (RAM+SWAP) does your host build machine have?
> On Saturday 13 September 2014 01:37 AM, Burton, Ross wrote:
>> On 12 September 2014 20:42, Arun Kumar <arunkr.linux@gmail.com> wrote:
>>> Hi all,
>>>
>>> I am new to the yocto project and was following the steps given in the quick start guide. I made a slight change as given in the superuser section.
>>>
>>> I used the "fetchall" option to get all the packages first and then started the build, now when i use this command
>>>
>>> "bitbake -k core-image-sato" i get the following error
>>>
>>> /------------------------------------------------------------------------------------
>>> ERROR: Task 595 (/home/arun/Documents/Dev/yocto/poky/meta/recipes-devtools/gcc/gcc-cross_4.9.bb, do_compile) failed with exit code '1'
>>> NOTE: Tasks Summary: Attempted 2729 tasks of which 1784 didn't need to be rerun and 1 failed.
>>> No currently running tasks (2729 of 5634)
>>>
>>> Summary: 1 task failed:
>>> /home/arun/Documents/Dev/yocto/poky/meta/recipes-devtools/gcc/gcc-cross_4.9.bb, do_compile
>>> Summary: There was 1 WARNING message shown.
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>> /------------------------------------------------------------------------------------
>>>
>>> any idea or hint where i might be going wrong?
>> You've trimmed the output at just the place where it was telling you
>> what went wrong. Re-run bitbake gcc-cross, and paste the output of
>> that.
>>
>> Ross
>>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2014-09-13 11:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-12 19:42 Basic build fails Arun Kumar
2014-09-12 20:07 ` Burton, Ross
2014-09-13 4:15 ` Arun Kumar
2014-09-13 11:48 ` Gary Thomas [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-09-15 5:45 arun kumar
2014-09-15 8:05 ` Burton, Ross
2014-09-15 15:27 ` Arun Kumar
2014-09-15 15:45 ` Burton, Ross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54142F22.6070101@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.