[PATCH] ARM: zynq: Add ISL9305 regulator on Parallella board

[afaerber@suse.de (Andreas Färber)]

Am 15.09.2014 um 15:26 schrieb Michal Simek:
> On 09/06/2014 01:40 PM, Mark Brown wrote:
>> There is an ISL9305 regulator on the Parallella board, add it to the DT
>> along with descriptions of all the supplies.
>>
>> Signed-off-by: Mark Brown <broonie@kernel.org>
>> ---
>>  arch/arm/boot/dts/zynq-parallella.dts | 23 +++++++++++++++++++++++
>>  1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
>> index 41afd9da6876..43ca89fb92e4 100644
>> --- a/arch/arm/boot/dts/zynq-parallella.dts
>> +++ b/arch/arm/boot/dts/zynq-parallella.dts
>> @@ -53,6 +53,29 @@
>>  
>>  &i2c0 {
>>  	status = "okay";
>> +
>> +	isl9305: isl9305 at 68 {
>> +		compatible = "isl,isl9305";
>> +		reg = <0x68>;
>> +
>> +		regulators {
>> +			dcd1 {
>> +				regulator-name = "VDD_DSP";
>> +				regulator-always-on;
>> +			};
>> +			dcd2 {
>> +				regulator-name = "1P35V";
>> +				regulator-always-on;
>> +			};
>> +			ldo1 {
>> +				regulator-name = "VDD_ADJ";
>> +			};
>> +			ldo2 {
>> +				regulator-name = "VDD_GPIO";
>> +				regulator-always-on;
>> +			};
>> +		};
>> +	};
>>  };
>>  
>>  &sdhci1 {
>>
> 
> Applied.

Where exactly on the board did you spot that regulator? I did not spot
it on my pre-ordered board and wonder whether it might be a difference
of the revised RS-distributed board with the large heat sink?

Thanks,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140915/4ae73903/attachment.sig>