All of lore.kernel.org
 help / color / mirror / Atom feed
From: "David Müller (ELSOFT AG)" <d.mueller@elsoft.ch>
To: Jean-Michel Hautbois <jhautbois@gmail.com>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>
Subject: Re: "Card stuck in programming state! __mmc_switch" problem on i.MX6 + eMMC
Date: Wed, 17 Sep 2014 09:45:57 +0200	[thread overview]
Message-ID: <54193C35.8060104@elsoft.ch> (raw)
In-Reply-To: <CAL8zT=hahrDA++0Y3K=m5XXvwRBNRyfW2NWfQWjFV0cg6sHS2A@mail.gmail.com>

Hi Jean-Michel

Jean-Michel Hautbois wrote:
> Can you show your DT (at least pinmux part and usdhc3 node) ?

	pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x1b0b1
			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100b1
			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x1b0b1
			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x1b0b1
			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x1b0b1
			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x1b0b1
			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x1b0b1
			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x1b0b1
			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x1b0b1
			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x1b0b1
			MX6QDL_PAD_SD3_RST__SD3_RESET  0x1b070
		>;
	};

&usdhc3 { /* eMMC */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3>;
	vmmc-supply = <&reg_3v15>;
	non-removable;
	no-1-8-v;
	bus-width = <8>;
	status = "okay";
};


I've tracked the problem down to the point were the MMC code tries to
switch the eMMC to 8bit bus width (mmc_select_bus_width()).


  reply	other threads:[~2014-09-17  7:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-16 14:37 "Card stuck in programming state! __mmc_switch" problem on i.MX6 + eMMC David Müller (ELSOFT AG)
2014-09-16 15:14 ` Jean-Michel Hautbois
2014-09-17  7:45   ` David Müller (ELSOFT AG) [this message]
2014-09-30  0:35 ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54193C35.8060104@elsoft.ch \
    --to=d.mueller@elsoft.ch \
    --cc=jhautbois@gmail.com \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.