From: Clemens Ladisch <clemens@ladisch.de>
To: Harley Griggs <hgriggs@posteo.co.uk>, Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: virtuoso: add partial Xonar Xense support
Date: Sun, 21 Sep 2014 22:49:12 +0200 [thread overview]
Message-ID: <541F39C8.1050306@ladisch.de> (raw)
In-Reply-To: <20140910185841.75F9525AF532@mx02.posteo.de>
Sorry for the delay.
Harley Griggs wrote:
> This patch adds partial support for the Xonar Xense.
>
> Signed-off-by: Harley Griggs <hgriggs@posteo.co.uk>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
> ---
> sound/pci/oxygen/virtuoso.c | 1 +
> sound/pci/oxygen/xonar_pcm179x.c | 133 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 134 insertions(+)
>
> diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
> index 7b317a2..83de6fb 100644
> --- a/sound/pci/oxygen/virtuoso.c
> +++ b/sound/pci/oxygen/virtuoso.c
> @@ -52,6 +52,7 @@ static const struct pci_device_id xonar_ids[] = {
> { OXYGEN_PCI_SUBID(0x1043, 0x835d) },
> { OXYGEN_PCI_SUBID(0x1043, 0x835e) },
> { OXYGEN_PCI_SUBID(0x1043, 0x838e) },
> + { OXYGEN_PCI_SUBID(0x1043, 0x8428) },
> { OXYGEN_PCI_SUBID(0x1043, 0x8522) },
> { OXYGEN_PCI_SUBID(0x1043, 0x85f4) },
> { OXYGEN_PCI_SUBID_BROKEN_EEPROM },
> diff --git a/sound/pci/oxygen/xonar_pcm179x.c b/sound/pci/oxygen/xonar_pcm179x.c
> index e026059..ddf1717 100644
> --- a/sound/pci/oxygen/xonar_pcm179x.c
> +++ b/sound/pci/oxygen/xonar_pcm179x.c
> @@ -212,6 +212,9 @@
> #define GPIO_ST_MAGIC 0x0040
> #define GPIO_ST_HP 0x0080
>
> +#define GPIO_XENSE_OUTPUT_ENABLE (0x0001 | 0x0010 | 0x0020)
> +#define GPIO_XENSE_SPEAKERS 0x0080
> +
> #define I2C_DEVICE_PCM1796(i) (0x98 + ((i) << 1)) /* 10011, ii, /W=0 */
> #define I2C_DEVICE_CS2000 0x9c /* 100111, 0, /W=0 */
>
> @@ -499,6 +502,51 @@ static void xonar_stx_init(struct oxygen *chip)
> xonar_st_init_common(chip);
> }
>
> +static void xonar_xense_init(struct oxygen *chip)
> +{
> + struct xonar_pcm179x *data = chip->model_data;
> +
> + data->generic.ext_power_reg = OXYGEN_GPI_DATA;
> + data->generic.ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
> + data->generic.ext_power_bit = GPI_EXT_POWER;
> + xonar_init_ext_power(chip);
> +
> + data->generic.anti_pop_delay = 100;
> + data->has_cs2000 = 1;
> + data->cs2000_regs[CS2000_FUN_CFG_1] = CS2000_REF_CLK_DIV_1;
> +
> + oxygen_write16(chip, OXYGEN_I2S_A_FORMAT,
> + OXYGEN_RATE_48000 |
> + OXYGEN_I2S_FORMAT_I2S |
> + OXYGEN_I2S_MCLK(MCLK_512) |
> + OXYGEN_I2S_BITS_16 |
> + OXYGEN_I2S_MASTER |
> + OXYGEN_I2S_BCLK_64);
> +
> + xonar_st_init_i2c(chip);
> + cs2000_registers_init(chip);
> +
> + data->generic.output_enable_bit = GPIO_XENSE_OUTPUT_ENABLE;
> + data->dacs = 1;
> + data->hp_gain_offset = 2*-18;
> +
> + pcm1796_init(chip);
> +
> + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
> + GPIO_INPUT_ROUTE | GPIO_ST_HP_REAR |
> + GPIO_ST_MAGIC | GPIO_XENSE_SPEAKERS);
> + oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA,
> + GPIO_INPUT_ROUTE | GPIO_ST_HP_REAR |
> + GPIO_XENSE_SPEAKERS);
> +
> + xonar_init_cs53x1(chip);
> + xonar_enable_output(chip);
> +
> + snd_component_add(chip->card, "PCM1796");
> + snd_component_add(chip->card, "CS5381");
> + snd_component_add(chip->card, "CS2000");
> +}
> +
> static void xonar_d2_cleanup(struct oxygen *chip)
> {
> xonar_disable_output(chip);
> @@ -859,6 +907,67 @@ static const struct snd_kcontrol_new st_controls[] = {
> },
> };
>
> +static int xense_output_switch_get(struct snd_kcontrol *ctl,
> + struct snd_ctl_elem_value *value)
> +{
> + struct oxygen *chip = ctl->private_data;
> + u16 gpio;
> +
> + gpio = oxygen_read16(chip, OXYGEN_GPIO_DATA);
> + if (gpio & GPIO_XENSE_SPEAKERS)
> + value->value.enumerated.item[0] = 0;
> + else if (!(gpio & GPIO_XENSE_SPEAKERS) && (gpio & GPIO_ST_HP_REAR))
> + value->value.enumerated.item[0] = 1;
> + else
> + value->value.enumerated.item[0] = 2;
> + return 0;
> +}
> +
> +static int xense_output_switch_put(struct snd_kcontrol *ctl,
> + struct snd_ctl_elem_value *value)
> +{
> + struct oxygen *chip = ctl->private_data;
> + struct xonar_pcm179x *data = chip->model_data;
> + u16 gpio_old, gpio;
> +
> + mutex_lock(&chip->mutex);
> + gpio_old = oxygen_read16(chip, OXYGEN_GPIO_DATA);
> + gpio = gpio_old;
> + switch (value->value.enumerated.item[0]) {
> + case 0:
> + gpio |= GPIO_XENSE_SPEAKERS | GPIO_ST_HP_REAR;
> + break;
> + case 1:
> + gpio = (gpio | GPIO_ST_HP_REAR) & ~GPIO_XENSE_SPEAKERS;
> + break;
> + case 2:
> + gpio &= ~(GPIO_XENSE_SPEAKERS | GPIO_ST_HP_REAR);
> + break;
> + }
> + oxygen_write16(chip, OXYGEN_GPIO_DATA, gpio);
> + data->hp_active = !(gpio & GPIO_XENSE_SPEAKERS);
> + update_pcm1796_volume(chip);
> + mutex_unlock(&chip->mutex);
> + return gpio != gpio_old;
> +}
> +
> +static const struct snd_kcontrol_new xense_controls[] = {
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .name = "Analog Output",
> + .info = st_output_switch_info,
> + .get = xense_output_switch_get,
> + .put = xense_output_switch_put,
> + },
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .name = "Headphones Impedance Playback Enum",
> + .info = st_hp_volume_offset_info,
> + .get = st_hp_volume_offset_get,
> + .put = st_hp_volume_offset_put,
> + },
> +};
> +
> static void xonar_line_mic_ac97_switch(struct oxygen *chip,
> unsigned int reg, unsigned int mute)
> {
> @@ -946,6 +1055,23 @@ static int xonar_st_mixer_init(struct oxygen *chip)
> return 0;
> }
>
> +static int xonar_xense_mixer_init(struct oxygen *chip)
> +{
> + unsigned int i;
> + int err;
> +
> + for (i = 0; i < ARRAY_SIZE(xense_controls); ++i) {
> + err = snd_ctl_add(chip->card,
> + snd_ctl_new1(&xense_controls[i], chip));
> + if (err < 0)
> + return err;
> + }
> + err = add_pcm1796_controls(chip);
> + if (err < 0)
> + return err;
> + return 0;
> +}
> +
> static void dump_pcm1796_registers(struct oxygen *chip,
> struct snd_info_buffer *buffer)
> {
> @@ -1146,6 +1272,13 @@ int get_xonar_pcm179x_model(struct oxygen *chip,
> chip->model.resume = xonar_stx_resume;
> chip->model.set_dac_params = set_pcm1796_params;
> break;
> + case 0x8428:
> + chip->model = model_xonar_st;
> + chip->model.shortname = "Xonar Xense";
> + chip->model.chip = "AV100";
> + chip->model.init = xonar_xense_init;
> + chip->model.mixer_init = xonar_xense_mixer_init;
> + break;
> default:
> return -EINVAL;
> }
next prev parent reply other threads:[~2014-09-21 20:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 14:18 [PATCH] ALSA: virtuoso: add Xonar Xense support Harley Griggs
2014-09-10 15:38 ` Clemens Ladisch
2014-09-10 16:04 ` Harley Griggs
2014-09-10 18:15 ` Clemens Ladisch
2014-09-10 18:19 ` [PATCH] ALSA: virtuoso: add partial " Harley Griggs
2014-09-10 18:43 ` Harley Griggs
2014-09-10 18:44 ` [PATCH] ALSA: virtuoso: add " Harley Griggs
2014-09-10 18:59 ` Harley Griggs
2014-09-10 18:58 ` [PATCH] ALSA: virtuoso: add partial " Harley Griggs
2014-09-21 20:49 ` Clemens Ladisch [this message]
2014-09-22 7:01 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=541F39C8.1050306@ladisch.de \
--to=clemens@ladisch.de \
--cc=alsa-devel@alsa-project.org \
--cc=hgriggs@posteo.co.uk \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.