[PATCH v2 1/8] ARM: add mach-asm9260

[linux@rempel-privat.de (Oleksij Rempel)]

Am 22.09.2014 um 17:08 schrieb Arnd Bergmann:
> On Sunday 21 September 2014 20:41:37 Oleksij Rempel wrote:
>> it is low cost (?) SoC targeted for market in China and India which
>> trying to compete with AT91SAM9G25.
>>
>> Here is some info:
>> http://www.alphascale.com/index.asp?ics/615.html
>>
>> One of products:
>> http://www.aliexpress.com/store/product/2014-hot-sales-FREE-SHIPPING-new-Purple-core-ARM9-development-board-ASM9260T-SDRAM-power-line/433637_1931495721.html
>>
>> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
> 
> Thanks for the submission! It looks pretty good, but has one main mistake
> in being incompatible with ARCH_MULTIPLATFORM. I think that should be easy
> to fix. There are also a few minor issues that can be improved.
> 
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index 5918d40..1a71feb 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -379,6 +379,20 @@ config ARCH_AT91
>>  	  This enables support for systems based on Atmel
>>  	  AT91RM9200 and AT91SAM9* processors.
>>  
>> +config MACH_ASM9260
>> +	bool "Alphascale ASM9260"
>> +	select ARCH_REQUIRE_GPIOLIB
>> +	select COMMON_CLK
>> +	select IRQ_DOMAIN
>> +	select SPARSE_IRQ
>> +	select MULTI_IRQ_HANDLER
>> +	select GENERIC_IRQ_CHIP
>> +	select GENERIC_CLOCKEVENTS
>> +	select CLKSRC_MMIO
>> +	select CPU_ARM926T
>> +	help
>> +	  Support for Alpascale ASM9260 based platform.
> 
> To enable multiplatform support, please move this to its own
> arch/arm/mach-asm9260/Kconfig file and make it depend on ARCH_MULTI_V5,
> then remove all 'select' statements that are implicitly enabled there
> already (most of the above).

Should they be only in defconfig or selected by driver?


>> diff --git a/arch/arm/mach-asm9260/Makefile b/arch/arm/mach-asm9260/Makefile
>> new file mode 100644
>> index 0000000..4bd8ebd
>> --- /dev/null
>> +++ b/arch/arm/mach-asm9260/Makefile
>> @@ -0,0 +1,11 @@
>> +#
>> +# Makefile for the linux kernel.
>> +#
>> +
>> +# Object file lists.
>> +
>> +obj-y			:= core.o
>> +obj-m			:=
>> +obj-n			:=
>> +obj-			:=
> 
> You can remove most of these and just leave the one line.
> 
>> diff --git a/arch/arm/mach-asm9260/Makefile.boot b/arch/arm/mach-asm9260/Makefile.boot
>> new file mode 100644
>> index 0000000..c57b3b4
>> --- /dev/null
>> +++ b/arch/arm/mach-asm9260/Makefile.boot
>> @@ -0,0 +1,2 @@
>> +zreladdr-y	:= 0x20008000
> 
> This file should be removed, nowadays we use AUTO_ZRELADDR, which is
> implied by multiplatform.
> 
>> +static struct map_desc asm9260_io_desc[] __initdata = {
>> +	{	/* IO space */
>> +		.virtual	= (unsigned long)0xf0000000,
>> +		.pfn		= __phys_to_pfn(0x80000000),
>> +		.length		= 0x00800000,
>> +		.type		= MT_DEVICE
>> +	},
>> +	{	/* LCD IO space	*/
>> +		.virtual	= (unsigned long)0xf0a00000,
>> +		.pfn		= __phys_to_pfn(0x80800000),
>> +		.length		= 0x00009000,
>> +		.type		= MT_DEVICE
>> +	},
>> +	{	/* GPIO IO space */
>> +		.virtual	= (unsigned long)0xf0800000,
>> +		.pfn		= __phys_to_pfn(0x50000000),
>> +		.length		= 0x00100000,
>> +		.type		= MT_DEVICE
>> +	},
>> +	{	/* SRAM space Cacheable */
>> +		.virtual	= (unsigned long)0xd0000000,
>> +		.pfn		= __phys_to_pfn(0x40000000),
>> +		.length		= 0x00100000,
>> +#ifdef CONFIG_SRAM_MEM_CACHED
>> +		.type		= MT_MEMORY
>> +#else
>> +		.type		= MT_DEVICE
>> +#endif
>> +	},
>> +};
>
> This should not be necessary, as all drivers are supposed to
> ioremap their own device registers. For large register ranges
> that are used a lot, you could use these as an optimization to
> get 1 MB sections mapped using a large TLB entry, but usually
> the benefit is very small.

Do you mean only "SRAM space Cacheable" section?


>> +static void __init asm9260_init(void)
>> +{
>> +	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>> +}
> 
> When you don't do anything else in the init_machine callback, you can
> remove it entirely.
> 
> 	Arnd
> 


-- 
Regards,
Oleksij

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 213 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140923/206fb525/attachment-0001.sig>