Re: [PATCH] net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selected

[Giuseppe CAVALLARO <peppe.cavallaro@st.com>]

On 9/24/2014 12:48 PM, Kweh, Hock Leong wrote:
>> -----Original Message-----
>> From: Giuseppe CAVALLARO [mailto:peppe.cavallaro@st.com]
>> Sent: Wednesday, September 24, 2014 2:10 PM
>>>
>>> Hi peppe,
>>>
>>> Appreciate for the explanation. Just to clarify that I am not asking not to
>> pass in the priv->stmmac_clk.
>>> In fact, the fix will fail at case 2 if driver cannot obtain the priv->stmmac_clk,
>> but just not the case 1.
>>> For case 1, seem like it does not require the stmmac_clk then I think
>>> it should be OK not to fail it when driver did not get stmmac_clk but have
>> the clk_csr set.
>>
>> ok we can do that but this clock is also managed when the iface is down.
>> Maybe it could be convenient to manage it for power consumption.
>> What do you think?
>
> Hi peppe,
>
> I don't really get what you mean here. Are you telling that you are OK with the fix?
> Or you are referring to the bottom idea which introduce clock registration APIs to
> stmmac_pci driver?

I just meant that if no clock is passed then the probe doesn't fail and
we can keep a dev_warn. Pls surround the code with a comment and repost
the patch. Let me know and sorry for the delay on replying.

peppe

>
> Regarding the power management, isn't this taking care by the PCI framework itself
> for the PCI devices / PCI cards?
>
> Sorry, may be would need you to provide a big picture to this. Thanks. :)
>
>>
>>> Anyway, I can change the fix by adding the clock registration APIs
>>> being call at the stmmac_pci.c probe there before calling
>>> stmmac_dvr_probe. By doing this, it created a dependency to the pci
>>> driver that must have CONFIG_HAVE_CLK to be turned on. Besides, I
>> would need you guys to provide me information on other platforms about
>> what is the best value to set? Can I just set to zero since the stmmac_pci
>> driver is always using the priv->plat->clk_csr?