[PATCH v3 1/2] ARM: dts: vf610-colibri: Add PWM support

[bhuvanchandra.dv@toradex.com (BhuvanChandra.DV)]

On 9/25/2014 7:22 PM, Shawn Guo wrote:

> On Mon, Sep 22, 2014 at 03:38:11PM +0530, Bhuvanchandra DV wrote:
>> The Colibri standard defines four pins as PWM outputs, two of them (PWM
>> A and C) are routed to FTM instance 0 and the other two (PWM B and D)
>> are routed to FTM instance 1. Hence enable both FTM instances for the
>> Colibri module and mux the four pins accordingly.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> You should add Stefan's ACK tag.

Ok

>> ---
>>   arch/arm/boot/dts/vf610-colibri-eval-v3.dts |    8 ++++++++
>>   arch/arm/boot/dts/vf610-colibri.dtsi        |   24 ++++++++++++++++++++++++
>>   2 files changed, 32 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> index 7fb3066..00f63d9 100644
>> --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> @@ -33,6 +33,14 @@
>>   	status = "okay";
>>   };
>>   
>> +&pwm0 {
>> +	status = "okay";
>> +};
>> +
>> +&pwm1 {
>> +	status = "okay";
>> +};
>> +
> I was trying to apply the patches, but found pwm1 is not available in
> vf610.dtsi at all.  What tree is your patch generated against?  Or did I
> miss any prerequisite patches?
>
> Shawn

One prerequisite patch(PATCH 1/3) was missed. Available over here:
https://lkml.org/lkml/2014/9/17/86


>>   &uart0 {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
>> index 0cd8343..1f73c1c 100644
>> --- a/arch/arm/boot/dts/vf610-colibri.dtsi
>> +++ b/arch/arm/boot/dts/vf610-colibri.dtsi
>> @@ -44,6 +44,16 @@
>>   	arm,tag-latency = <3 2 3>;
>>   };
>>   
>> +&pwm0 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm0>;
>> +};
>> +
>> +&pwm1 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm1>;
>> +};
>> +
>>   &uart0 {
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&pinctrl_uart0>;
>> @@ -97,6 +107,20 @@
>>   			>;
>>   		};
>>   
>> +		pinctrl_pwm0: pwm0grp {
>> +			fsl,pins = <
>> +				VF610_PAD_PTB0__FTM0_CH0		0x1182
>> +				VF610_PAD_PTB1__FTM0_CH1		0x1182
>> +			>;
>> +		};
>> +
>> +		pinctrl_pwm1: pwm1grp {
>> +			fsl,pins = <
>> +				VF610_PAD_PTB8__FTM1_CH0		0x1182
>> +				VF610_PAD_PTB9__FTM1_CH1		0x1182
>> +			>;
>> +		};
>> +
>>   		pinctrl_uart0: uart0grp {
>>   			fsl,pins = <
>>   				VF610_PAD_PTB10__UART0_TX		0x21a2
>> -- 
>> 1.7.9.5
>>