From: Guillaume Gardet <guillaume.gardet@free.fr>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL
Date: Mon, 29 Sep 2014 08:39:54 +0200 [thread overview]
Message-ID: <5428FEBA.1010909@free.fr> (raw)
In-Reply-To: <1411116455-20619-1-git-send-email-guillaume.gardet@free.fr>
Hi,
Just a ping on this patch set which affects various part of u-boot.
Any comments ?
Guillaume
Le 19/09/2014 10:47, Guillaume GARDET a ?crit :
> Hi,
>
> This patch set adds EXT filesystem support to SPL and enables it for OMAP4 boards.
> Build is succesful on all omap4 and omap5 boards.
> Note that some OMAP3 boards (omap3_beagle and omap3_overo) may need to disable some functions in order to support EXT in SPL, otherwise the MLO (SPL) may be too big to fit in SRAM.
> I tested it succesfully on a Pandaboard (rev. A3) and on a Beagleboard xM (rev. B).
>
> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Tom Rini <trini@ti.com>
> Cc: Michal Simek <monstr@monstr.eu>
> Cc: Andreas Bie?mann <andreas.devel@googlemail.com>
>
>
> Regards,
>
> Guillaume
>
> ---
>
> Guillaume GARDET (5):
> Rename some defines containing FAT in their name to be filesystem
> generic MMCSD_MODE_FAT => MMCSD_MODE_FS
> CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME
> CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
> CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION =>
> CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
> spl: Add EXT support to SPL
> doc: Update documentation according to the EXT SPL support patch set
> spl: do not hang in spl_register_fat_device but return error value.
> It allows to use both CONFIG_SPL_FAT_SUPPORT and
> CONFIG_SPL_EXT_SUPPORT.
> TI:OMAP4: enable EXT support in SPL for OMAP4 boards
>
> README | 17 ++--
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 4 +-
> arch/arm/cpu/armv7/omap3/board.c | 2 +-
> arch/arm/cpu/armv7/zynq/spl.c | 2 +-
> arch/arm/cpu/at91-common/spl.c | 2 +-
> arch/arm/imx-common/spl.c | 2 +-
> common/spl/Makefile | 1 +
> common/spl/spl_ext.c | 138 +++++++++++++++++++++++++++
> common/spl/spl_fat.c | 8 +-
> common/spl/spl_mmc.c | 24 ++++-
> common/spl/spl_sata.c | 2 +-
> common/spl/spl_usb.c | 2 +-
> doc/README.SPL | 1 +
> fs/Makefile | 1 +
> include/configs/am3517_crane.h | 4 +-
> include/configs/am3517_evm.h | 4 +-
> include/configs/cm_t35.h | 4 +-
> include/configs/devkit8000.h | 8 +-
> include/configs/imx6_spl.h | 4 +-
> include/configs/mcx.h | 4 +-
> include/configs/omap3_evm.h | 4 +-
> include/configs/omap3_evm_quick_mmc.h | 4 +-
> include/configs/sama5d3_xplained.h | 4 +-
> include/configs/sama5d3xek.h | 4 +-
> include/configs/siemens-am33x-common.h | 4 +-
> include/configs/tao3530.h | 4 +-
> include/configs/ti814x_evm.h | 4 +-
> include/configs/ti816x_evm.h | 4 +-
> include/configs/ti_armv7_common.h | 8 +-
> include/configs/ti_omap4_common.h | 3 +
> include/configs/tricorder.h | 4 +-
> include/configs/zynq-common.h | 10 +-
> include/spl.h | 6 +-
> 34 files changed, 232 insertions(+), 67 deletions(-)
> create mode 100644 common/spl/spl_ext.c
>
next prev parent reply other threads:[~2014-09-29 6:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-19 8:47 [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 1/5] Rename some defines containing FAT in their name to be filesystem generic MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 2/5] spl: Add EXT support to SPL Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 3/5] doc: Update documentation according to the EXT SPL support patch set Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT Guillaume GARDET
2014-09-19 8:47 ` [U-Boot] [PATCH 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards Guillaume GARDET
2014-09-29 6:39 ` Guillaume Gardet [this message]
2014-09-30 13:33 ` [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL Tom Rini
2014-09-30 14:15 ` Guillaume Gardet
2014-10-15 15:53 ` [U-Boot] [PATCH V2 " Guillaume GARDET
2014-10-15 15:53 ` [U-Boot] [PATCH V2 1/5] Rename some defines containing FAT in their name to be filesystem generic Guillaume GARDET
2014-10-27 22:20 ` [U-Boot] [U-Boot, V2, " Tom Rini
2014-10-15 15:53 ` [U-Boot] [PATCH V2 2/5] spl: Add EXT support to SPL Guillaume GARDET
2014-10-27 22:22 ` [U-Boot] [U-Boot,V2,2/5] " Tom Rini
2014-10-29 12:45 ` Guillaume Gardet
2014-10-15 15:53 ` [U-Boot] [PATCH V2 3/5] doc: Update documentation according to the EXT SPL support patch set Guillaume GARDET
2014-10-27 22:21 ` [U-Boot] [U-Boot, V2, " Tom Rini
2014-10-15 15:53 ` [U-Boot] [PATCH V2 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT Guillaume GARDET
2014-10-27 22:21 ` [U-Boot] [U-Boot, V2, " Tom Rini
2014-10-15 15:53 ` [U-Boot] [PATCH V2 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards Guillaume GARDET
2014-10-27 22:21 ` [U-Boot] [U-Boot, V2, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5428FEBA.1010909@free.fr \
--to=guillaume.gardet@free.fr \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.