From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards
Date: Tue, 30 Sep 2014 22:47:53 +0900 [thread overview]
Message-ID: <542AB489.5050504@samsung.com> (raw)
In-Reply-To: <1411953534-4652-1-git-send-email-sjg@chromium.org>
Dear Simon Glass,
On 29/09/14 10:18, Simon Glass wrote:
> This series tries to unify the Samsung board configs into a few header
> files for exynos5 and exynos4.
>
> The purpose is to make it easier to move to driver model. In that case
> I would like things like the GPIO drivers and serial drivers to work in
> a standard way, and not need to support device tree and platform data at
> the same time. That would be quite painful.
>
> Another reason is that the Chrome OS EC drivers are currently included in
> boards that don't have a Chrome OS EC. This concern was raised by the
> Samsung maintainer (Minkyu) a while back.
>
> There are still a few boards that don't use CONFIG_OF_CONTROL so I have
> updated these rudimentary of device tree files based on feedback.
>
> This series has the side-effect of getting the EC interface working
> properly on Pit, so the keyboard works. It also provides access to the
> TPS65090 PMIC, which means that the backlight is enabled.
>
> Changes in v4:
> - Address review nits from Minkyu
> - Make this driver more like the one it came from
> - Rebase on top of master (CONFIG_OF settings moved to Kconfig)
> - Remove special FET_ERR_NOT_READY etc. and use standard errors
>
> Changes in v3:
> - Adjust device tree file based on Robert Baldyga's example
>
> Changes in v2:
> - Add new patch to enable keyboard on pit
> - Add new patch to split out cros_ec drivers
> - Add new patch to use 900MHz ARM frequeny in SPL for peach_pit
> - Avoid using a common file, and just add a device tree
> - Don't enable the cros_ec on smdk5420
> - Fix 'cashe' typo in commit subject
> - Fix device tree base addresses
> - Leave CONFIG_SERIAL3 in the individual board files
> - Leave in a few configs which are not in fact common to all boards
> - Reduce the number of common elements to avoid needing #undefs later
> - Slightly reword the commit message
>
> Simon Glass (15):
> Exynos: Use 900MHz ARM frequency in SPL for peach_pit
> exynos5: Enable data cache
> cros_ec: power: Add a tunnelled version of the tps65090 driver
> cros_ec: exynos: Use the correct tps65090 driver in each case
> dm: exynos: Split out the cros_ec drivers
> exynos: dts: Add device tree node for cros_ec keyboard
> exynos: Rename -dt config files to -common
> exynos: Move common exynos settings into a common file
> exynos: Move common smdk5420 things to common file
> exynos: config: Move cros_ec and tps65090 out of smdk boards
> config: Move arndale to use common exynos5250 file
> config: Move smdkv310 to use common exynos4 file
> samsung: Enable device tree for s5p_goni
> samsung: Enable device tree for smdkc100
> exynos: Enable pre-relocation malloc()
>
> arch/arm/Kconfig | 13 +-
> arch/arm/cpu/armv7/exynos/Kconfig | 1 +
> arch/arm/cpu/armv7/s5pc1xx/Kconfig | 25 +++
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/exynos4210-smdkv310.dts | 21 ++
> arch/arm/dts/exynos5420-peach-pit.dts | 57 +++++-
> arch/arm/dts/s5pc1xx-goni.dts | 28 +++
> arch/arm/dts/s5pc1xx-smdkc100.dts | 29 +++
> arch/arm/include/asm/arch-s5pc1xx/periph.h | 61 ++++++
> arch/arm/include/asm/arch-s5pc1xx/pinmux.h | 50 +++++
> configs/s5p_goni_defconfig | 2 +
> configs/smdkc100_defconfig | 2 +
> configs/smdkv310_defconfig | 1 +
> drivers/mmc/s5p_sdhci.c | 2 -
> drivers/power/pmic/Makefile | 3 +-
> drivers/power/pmic/pmic_tps65090_ec.c | 218 +++++++++++++++++++++
> include/configs/arndale.h | 195 +-----------------
> include/configs/{exynos4-dt.h => exynos-common.h} | 110 +++--------
> include/configs/exynos4-common.h | 68 +++++++
> include/configs/{exynos5-dt.h => exynos5-common.h} | 126 ++----------
> include/configs/exynos5-dt-common.h | 35 ++++
> .../{exynos5250-dt.h => exynos5250-common.h} | 7 +-
> .../configs/{exynos5420.h => exynos5420-common.h} | 22 ++-
> include/configs/odroid.h | 4 +-
> include/configs/origen.h | 5 +-
> include/configs/peach-pit.h | 16 +-
> include/configs/s5p_goni.h | 9 +-
> include/configs/s5pc210_universal.h | 5 +-
> include/configs/smdk5250.h | 23 ++-
> include/configs/smdk5420.h | 5 +-
> include/configs/smdkc100.h | 6 +
> include/configs/smdkv310.h | 61 +-----
> include/configs/snow.h | 25 ++-
> include/configs/trats.h | 6 +-
> include/configs/trats2.h | 6 +-
> 35 files changed, 760 insertions(+), 490 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/s5pc1xx/Kconfig
> create mode 100644 arch/arm/dts/exynos4210-smdkv310.dts
> create mode 100644 arch/arm/dts/s5pc1xx-goni.dts
> create mode 100644 arch/arm/dts/s5pc1xx-smdkc100.dts
> create mode 100644 arch/arm/include/asm/arch-s5pc1xx/periph.h
> create mode 100644 arch/arm/include/asm/arch-s5pc1xx/pinmux.h
> create mode 100644 drivers/power/pmic/pmic_tps65090_ec.c
> rename include/configs/{exynos4-dt.h => exynos-common.h} (51%)
> create mode 100644 include/configs/exynos4-common.h
> rename include/configs/{exynos5-dt.h => exynos5-common.h} (64%)
> create mode 100644 include/configs/exynos5-dt-common.h
> rename include/configs/{exynos5250-dt.h => exynos5250-common.h} (88%)
> rename include/configs/{exynos5420.h => exynos5420-common.h} (71%)
>
patch failed at latest u-boot-samsung tree.
error: patch failed: include/configs/smdk5250.h:9
error: include/configs/smdk5250.h: patch does not apply
error: patch failed: include/configs/snow.h:9
error: include/configs/snow.h: patch does not apply
Patch failed at 0007 exynos: Rename -dt config files to -common
Please check.
Thanks,
Minkyu Kang.
next prev parent reply other threads:[~2014-09-30 13:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 1:18 [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 01/15] Exynos: Use 900MHz ARM frequency in SPL for peach_pit Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 02/15] exynos5: Enable data cache Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 04/15] cros_ec: exynos: Use the correct tps65090 driver in each case Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 05/15] dm: exynos: Split out the cros_ec drivers Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 06/15] exynos: dts: Add device tree node for cros_ec keyboard Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 07/15] exynos: Rename -dt config files to -common Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 08/15] exynos: Move common exynos settings into a common file Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 09/15] exynos: Move common smdk5420 things to " Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 10/15] exynos: config: Move cros_ec and tps65090 out of smdk boards Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 11/15] config: Move arndale to use common exynos5250 file Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 12/15] config: Move smdkv310 to use common exynos4 file Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 13/15] samsung: Enable device tree for s5p_goni Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 14/15] samsung: Enable device tree for smdkc100 Simon Glass
2014-09-29 1:18 ` [U-Boot] [PATCH v4 15/15] exynos: Enable pre-relocation malloc() Simon Glass
2014-09-30 13:47 ` Minkyu Kang [this message]
2014-10-01 2:12 ` [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards Simon Glass
2014-10-02 1:59 ` Minkyu Kang
2014-10-02 2:01 ` Simon Glass
-- strict thread matches above, loose matches on Subject: below --
2014-09-29 1:17 Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542AB489.5050504@samsung.com \
--to=mk7.kang@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.