Re: UBI ECC errors on kernel 3.16.2

[Angelo Dureghello <angelo70@gmail.com>]

On 01/10/2014 22:51, Richard Weinberger wrote:
>
> Do mtd and ubi tests pass?
>
I have successfully executed all mtd tests under old kernel 3.5.1.
Now, with this new  kernel 3.16.2 i can't boot, and i don't know how i 
could test it.

Only thing that i can do is to minimally verify the flashed image from 
u-boot

U-Boot > ubi part rootfs 2048
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: volume 0 ("rootfs") re-sized from 205 to 472 LEBs
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=6"
UBI: MTD device size:            60 MiB
UBI: number of good PEBs:        480
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 480
UBI: number of PEBs reserved for bad PEB handling: 4
UBI: max/mean erase counter: 1/0
U-Boot >

It seems sane.

Also, once loaded the system and get the errors, the ubi get damaged
(check from U.boot shows ecc errors

Regards