From: Florian Fainelli <f.fainelli@gmail.com>
To: Petri Gynther <pgynther@google.com>, netdev@vger.kernel.org
Cc: davem@davemloft.net, thomas.petazzoni@free-electrons.com
Subject: Re: [PATCH net-next] net: phy: adjust fixed_phy_register() return value
Date: Wed, 01 Oct 2014 14:56:05 -0700 [thread overview]
Message-ID: <542C7875.8090102@gmail.com> (raw)
In-Reply-To: <20141001214509.2BF4F10070D@puck.mtv.corp.google.com>
On 10/01/2014 02:45 PM, Petri Gynther wrote:
> Adjust fixed_phy_register() to return struct phy_device *, so that
> it becomes easy to use fixed PHYs without device tree support:
>
> phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL);
> fixed_phy_set_link_update(phydev, fixed_phy_link_update);
> phy_connect_direct(netdev, phydev, handler_fn, phy_interface);
>
> This change is a prerequisite for modifying bcmgenet driver to work
> without a device tree on Broadcom's MIPS-based 7xxx platforms.
Without a Device Tree enabled platform, you still have the
fixed_phy_add() API to register a fixed PHY at a known location (the
second parameter), did we someone broke that with Thomas' patches?
You could for instance register a fixed PHY at address 1 for the
GENET/MoCA instance to find it.
Other than that, I am not opposed to the change, since it allows us to
eventually get rid of fixed_phy_add() in the future.
Thanks!
>
> Signed-off-by: Petri Gynther <pgynther@google.com>
> ---
> drivers/net/phy/fixed.c | 16 ++++++++--------
> drivers/of/of_mdio.c | 7 +++++--
> include/linux/phy_fixed.h | 14 +++++++-------
> 3 files changed, 20 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
> index 5b19fbb..47872caa 100644
> --- a/drivers/net/phy/fixed.c
> +++ b/drivers/net/phy/fixed.c
> @@ -233,9 +233,9 @@ EXPORT_SYMBOL_GPL(fixed_phy_del);
> static int phy_fixed_addr;
> static DEFINE_SPINLOCK(phy_fixed_addr_lock);
>
> -int fixed_phy_register(unsigned int irq,
> - struct fixed_phy_status *status,
> - struct device_node *np)
> +struct phy_device *fixed_phy_register(unsigned int irq,
> + struct fixed_phy_status *status,
> + struct device_node *np)
> {
> struct fixed_mdio_bus *fmb = &platform_fmb;
> struct phy_device *phy;
> @@ -246,19 +246,19 @@ int fixed_phy_register(unsigned int irq,
> spin_lock(&phy_fixed_addr_lock);
> if (phy_fixed_addr == PHY_MAX_ADDR) {
> spin_unlock(&phy_fixed_addr_lock);
> - return -ENOSPC;
> + return ERR_PTR(-ENOSPC);
> }
> phy_addr = phy_fixed_addr++;
> spin_unlock(&phy_fixed_addr_lock);
>
> ret = fixed_phy_add(PHY_POLL, phy_addr, status);
> if (ret < 0)
> - return ret;
> + return ERR_PTR(ret);
>
> phy = get_phy_device(fmb->mii_bus, phy_addr, false);
> if (!phy || IS_ERR(phy)) {
> fixed_phy_del(phy_addr);
> - return -EINVAL;
> + return ERR_PTR(-EINVAL);
> }
>
> of_node_get(np);
> @@ -269,10 +269,10 @@ int fixed_phy_register(unsigned int irq,
> phy_device_free(phy);
> of_node_put(np);
> fixed_phy_del(phy_addr);
> - return ret;
> + return ERR_PTR(ret);
> }
>
> - return 0;
> + return phy;
> }
>
> static int __init fixed_mdio_bus_init(void)
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index a85d800..907baa9 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
> @@ -286,6 +286,7 @@ int of_phy_register_fixed_link(struct device_node *np)
> struct device_node *fixed_link_node;
> const __be32 *fixed_link_prop;
> int len;
> + struct phy_device *phy;
>
> /* New binding */
> fixed_link_node = of_get_child_by_name(np, "fixed-link");
> @@ -299,7 +300,8 @@ int of_phy_register_fixed_link(struct device_node *np)
> status.asym_pause = of_property_read_bool(fixed_link_node,
> "asym-pause");
> of_node_put(fixed_link_node);
> - return fixed_phy_register(PHY_POLL, &status, np);
> + phy = fixed_phy_register(PHY_POLL, &status, np);
> + return (!phy || IS_ERR(phy));
> }
>
> /* Old binding */
> @@ -310,7 +312,8 @@ int of_phy_register_fixed_link(struct device_node *np)
> status.speed = be32_to_cpu(fixed_link_prop[2]);
> status.pause = be32_to_cpu(fixed_link_prop[3]);
> status.asym_pause = be32_to_cpu(fixed_link_prop[4]);
> - return fixed_phy_register(PHY_POLL, &status, np);
> + phy = fixed_phy_register(PHY_POLL, &status, np);
> + return (!phy || IS_ERR(phy));
> }
>
> return -ENODEV;
> diff --git a/include/linux/phy_fixed.h b/include/linux/phy_fixed.h
> index 9411386..f2ca1b4 100644
> --- a/include/linux/phy_fixed.h
> +++ b/include/linux/phy_fixed.h
> @@ -14,9 +14,9 @@ struct device_node;
> #ifdef CONFIG_FIXED_PHY
> extern int fixed_phy_add(unsigned int irq, int phy_id,
> struct fixed_phy_status *status);
> -extern int fixed_phy_register(unsigned int irq,
> - struct fixed_phy_status *status,
> - struct device_node *np);
> +extern struct phy_device *fixed_phy_register(unsigned int irq,
> + struct fixed_phy_status *status,
> + struct device_node *np);
> extern void fixed_phy_del(int phy_addr);
> extern int fixed_phy_set_link_update(struct phy_device *phydev,
> int (*link_update)(struct net_device *,
> @@ -27,11 +27,11 @@ static inline int fixed_phy_add(unsigned int irq, int phy_id,
> {
> return -ENODEV;
> }
> -static inline int fixed_phy_register(unsigned int irq,
> - struct fixed_phy_status *status,
> - struct device_node *np)
> +static inline struct phy_device *fixed_phy_register(unsigned int irq,
> + struct fixed_phy_status *status,
> + struct device_node *np)
> {
> - return -ENODEV;
> + return ERR_PTR(-ENODEV);
> }
> static inline int fixed_phy_del(int phy_addr)
> {
>
next prev parent reply other threads:[~2014-10-01 21:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-01 21:45 [PATCH net-next] net: phy: adjust fixed_phy_register() return value Petri Gynther
2014-10-01 21:56 ` Florian Fainelli [this message]
2014-10-01 22:16 ` Petri Gynther
2014-10-02 0:33 ` Florian Fainelli
2014-10-03 19:47 ` David Miller
2014-10-04 12:07 ` Thomas Petazzoni
2014-10-05 0:02 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542C7875.8090102@gmail.com \
--to=f.fainelli@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=pgynther@google.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.