From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
To: Andy Zhou <azhou@nicira.com>, davem@davemloft.net
Cc: netdev@vger.kernel.org, Jesse Gross <jesse@nicira.com>
Subject: Re: [net-next 1/6] net: Add Geneve tunneling protocol driver
Date: Fri, 03 Oct 2014 15:44:39 +0200 [thread overview]
Message-ID: <542EA847.4000904@6wind.com> (raw)
In-Reply-To: <1412237085-27215-2-git-send-email-azhou@nicira.com>
Le 02/10/2014 10:04, Andy Zhou a écrit :
> This adds a device level support for Geneve -- Generic Network
> Virtualization Encapsulation. The protocol is documented at
> http://tools.ietf.org/html/draft-gross-geneve-01
>
> Only protocol layer Geneve support is provided by this driver.
> Openvswitch can be used for configuring, set up and tear down
> functional Geneve tunnels.
Do you plan too add the full support (ie being able to configure a
geneve netdev interface with iproute2)?
Another small comment below.
>
> Signed-off-by: Jesse Gross <jesse@nicira.com>
> Signed-off-by: Andy Zhou <azhou@nicira.com>
> ---
> include/net/geneve.h | 91 +++++++++++
> include/net/ip_tunnels.h | 2 +
> net/ipv4/Kconfig | 14 ++
> net/ipv4/Makefile | 1 +
> net/ipv4/geneve.c | 373 ++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 481 insertions(+)
> create mode 100644 include/net/geneve.h
> create mode 100644 net/ipv4/geneve.c
>
> diff --git a/include/net/geneve.h b/include/net/geneve.h
> new file mode 100644
> index 0000000..ce98865
> --- /dev/null
> +++ b/include/net/geneve.h
> @@ -0,0 +1,91 @@
> +#ifndef __NET_GENEVE_H
> +#define __NET_GENEVE_H 1
> +
> +#include <net/udp_tunnel.h>
> +
> +struct geneve_sock;
> +
> +typedef void (geneve_rcv_t)(struct geneve_sock *gs, struct sk_buff *skb);
> +
> +struct geneve_sock {
> + struct hlist_node hlist;
> + geneve_rcv_t *rcv;
> + void *rcv_data;
> + struct work_struct del_work;
> + struct socket *sock;
> + struct rcu_head rcu;
> + atomic_t refcnt;
> + struct udp_offload udp_offloads;
> +};
> +
> +/* Geneve Header:
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * |Ver| Opt Len |O|C| Rsvd. | Protocol Type |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | Virtual Network Identifier (VNI) | Reserved |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | Variable Length Options |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + *
> + * Option Header:
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | Option Class | Type |R|R|R| Length |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | Variable Option Data |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + */
> +
> +struct geneve_opt {
> + __be16 opt_class;
> + u8 type;
> +#ifdef __LITTLE_ENDIAN_BITFIELD
> + u8 length:5;
> + u8 r3:1;
> + u8 r2:1;
> + u8 r1:1;
> +#else
> + u8 r1:1;
> + u8 r2:1;
> + u8 r3:1;
> + u8 length:5;
> +#endif
> + u8 opt_data[];
> +};
> +
> +#define GENEVE_CRIT_OPT_TYPE (1 << 7)
> +
> +struct genevehdr {
> +#ifdef __LITTLE_ENDIAN_BITFIELD
> + u8 opt_len:6;
> + u8 ver:2;
> + u8 rsvd1:6;
> + u8 critical:1;
> + u8 oam:1;
> +#else
> + u8 ver:2;
> + u8 opt_len:6;
> + u8 oam:1;
> + u8 critical:1;
> + u8 rsvd1:6;
> +#endif
> + __be16 proto_type;
> + u8 vni[3];
> + u8 rsvd2;
> + struct geneve_opt options[];
> +};
> +
> +#define GENEVE_VER 0
> +#define GENEVE_BASE_HLEN (sizeof(struct udphdr) + sizeof(struct genevehdr))
> +
> +struct geneve_sock *geneve_sock_add(struct net *net, __be16 port,
> + geneve_rcv_t *rcv, void *data,
> + bool no_share, bool ipv6);
> +
> +void geneve_sock_release(struct geneve_sock *vs);
> +
> +int geneve_xmit_skb(struct geneve_sock *gs, struct rtable *rt,
> + struct sk_buff *skb, __be32 src, __be32 dst, __u8 tos,
> + __u8 ttl, __be16 df, __be16 src_port, __be16 dst_port,
> + __be16 tun_flags, u8 vni[3], u8 opt_len, u8 *opt,
> + bool xnet);
> +#endif
> diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
> index 7f538ba..a9ce155 100644
> --- a/include/net/ip_tunnels.h
> +++ b/include/net/ip_tunnels.h
> @@ -95,6 +95,8 @@ struct ip_tunnel {
> #define TUNNEL_VERSION __cpu_to_be16(0x40)
> #define TUNNEL_NO_KEY __cpu_to_be16(0x80)
> #define TUNNEL_DONT_FRAGMENT __cpu_to_be16(0x0100)
> +#define TUNNEL_OAM __cpu_to_be16(0x0200)
> +#define TUNNEL_CRIT_OPT __cpu_to_be16(0x0400)
>
> struct tnl_ptk_info {
> __be16 flags;
> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
> index 69fb378..15ce6b0 100644
> --- a/net/ipv4/Kconfig
> +++ b/net/ipv4/Kconfig
> @@ -453,6 +453,20 @@ config TCP_CONG_BIC
> increase provides TCP friendliness.
> See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/
>
> +config GENEVE
> + tristate "Generic Network Virtualization Encapsulation (Geneve)"
> + depends on INET
> + select NET_IP_TUNNEL
> + select NET_UDP_TUNNEL
> + ---help---
Use tabs instead of spaces for the baove lines.
next prev parent reply other threads:[~2014-10-03 13:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 8:04 [net-next 0/6] Add Geneve tunnel protocol support Andy Zhou
2014-10-02 8:04 ` [net-next 1/6] net: Add Geneve tunneling protocol driver Andy Zhou
2014-10-03 13:44 ` Nicolas Dichtel [this message]
2014-10-03 19:45 ` Andy Zhou
2014-10-02 8:04 ` [net-next 2/6] openvswitch: Eliminate memset() from flow_extract Andy Zhou
2014-10-02 8:04 ` [net-next 3/6] openvswitch: Add support for matching on OAM packets Andy Zhou
2014-10-02 8:04 ` [net-next 4/6] openvswitch: Wrap struct ovs_key_ipv4_tunnel in a new structure Andy Zhou
2014-10-02 8:04 ` [net-next 5/6] openvswitch: Factor out allocation and verification of actions Andy Zhou
2014-10-02 8:04 ` [net-next 6/6] openvswitch: Add support for Geneve tunneling Andy Zhou
2014-10-02 23:04 ` Tom Herbert
2014-10-03 1:48 ` Jesse Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542EA847.4000904@6wind.com \
--to=nicolas.dichtel@6wind.com \
--cc=azhou@nicira.com \
--cc=davem@davemloft.net \
--cc=jesse@nicira.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.