From: Igor Novgorodov <igor@novg.net>
To: drbd-dev@lists.linbit.com
Subject: [Drbd-dev] Bug in latest 8.4-git
Date: Fri, 03 Oct 2014 23:33:44 +0400 [thread overview]
Message-ID: <542EFA18.9060705@novg.net> (raw)
Hello!
Just checked out latest rev of git tree and built it against latest LTS
vanilla kernel - 3.14.19
And the problem is that it won't connect to the peer server (it's drbd
8.4.3 and kernel 3.4.42) at all
with "listen failed, err = -515" error. Replication link is 4x1G
balance-rr bond which worked fine
for years, if that's relevant. IPv6 is disabled in kernel completely.
I've fallen back to 8.4.5 stable release and it all worked fine again.
The thing is that last time i've checked out git version around July
2014 - it worked fine too,
something broke later.
Kernel log of the connection follows, glad to get any help or answer any
questions:
[ 987.195779] drbd: failed to initialize debugfs -- will not be available
[ 987.195875] drbd: initialized. Version: 8.4.5 (api:1/proto:86-101)
[ 987.195946] drbd: GIT-hash: ca3a67af3823b85614621a4cf95e191c5820c0eb
build by root@debian-service, 2014-10-03 21:23:28
[ 987.196039] drbd: registered as block device major 147
[ 987.243928] drbd VM_STORAGE2_1: Starting worker thread (from
drbdsetup-84 [7574])
[ 987.244564] block drbd0: disk( Diskless -> Attaching )
[ 987.245006] drbd VM_STORAGE2_1: Method to ensure write ordering: drain
[ 987.245080] block drbd0: max BIO size = 286720
[ 987.245151] block drbd0: Adjusting my ra_pages to backing device's
(32 -> 70)
[ 987.245227] block drbd0: drbd_bm_resize called with capacity ==
23436772800
[ 987.309127] block drbd0: resync bitmap: bits=2929596600
words=45774947 pages=89405
[ 987.309223] block drbd0: size = 11 TB (11718386400 KB)
[ 988.983804] block drbd0: recounting of set bits took additional 8 jiffies
[ 988.983884] block drbd0: 0 KB (0 bits) marked out-of-sync by on disk
bit-map.
[ 988.983964] block drbd0: disk( Attaching -> UpToDate )
[ 988.984048] block drbd0: attached to UUIDs
6BCB7D550A1E86DE:0000000000000000:22A0154CECB25AF2:229F154CECB25AF3
[ 989.016875] drbd VM_STORAGE2_2: Starting worker thread (from
drbdsetup-84 [7580])
[ 989.017381] block drbd1: disk( Diskless -> Attaching )
[ 989.017842] drbd VM_STORAGE2_2: Method to ensure write ordering: drain
[ 989.017919] block drbd1: max BIO size = 286720
[ 989.017990] block drbd1: Adjusting my ra_pages to backing device's
(32 -> 70)
[ 989.018066] block drbd1: drbd_bm_resize called with capacity ==
17577578552
[ 989.065815] block drbd1: resync bitmap: bits=2197197319
words=34331209 pages=67054
[ 989.065908] block drbd1: size = 8382 GB (8788789276 KB)
[ 990.280610] block drbd1: recounting of set bits took additional 5 jiffies
[ 990.280690] block drbd1: 0 KB (0 bits) marked out-of-sync by on disk
bit-map.
[ 990.280771] block drbd1: disk( Attaching -> UpToDate )
[ 990.280855] block drbd1: attached to UUIDs
7869022EE30A1DDC:0000000000000000:BEFCB1DA3C794170:BEFBB1DA3C794171
[ 990.282283] drbd VM_STORAGE2_1: conn( StandAlone -> Unconnected )
[ 990.282382] drbd VM_STORAGE2_1: Starting receiver thread (from
drbd_w_VM_STORA [7575])
[ 990.282590] drbd VM_STORAGE2_1: receiver (re)started
[ 990.282698] drbd VM_STORAGE2_1: conn( Unconnected -> WFConnection )
[ 990.282788] drbd VM_STORAGE2_1: listen failed, err = -515
[ 990.282888] drbd VM_STORAGE2_1: conn( WFConnection -> Disconnecting )
[ 990.283287] drbd VM_STORAGE2_1: Connection closed
[ 990.283307] drbd VM_STORAGE2_2: conn( StandAlone -> Unconnected )
[ 990.283349] drbd VM_STORAGE2_2: Starting receiver thread (from
drbd_w_VM_STORA [7581])
[ 990.283461] drbd VM_STORAGE2_2: receiver (re)started
[ 990.283500] drbd VM_STORAGE2_2: conn( Unconnected -> WFConnection )
[ 990.283515] drbd VM_STORAGE2_2: listen failed, err = -515
[ 990.283542] drbd VM_STORAGE2_2: conn( WFConnection -> Disconnecting )
[ 990.283580] drbd VM_STORAGE2_2: Connection closed
[ 990.283611] drbd VM_STORAGE2_2: conn( Disconnecting -> StandAlone )
[ 990.283975] drbd VM_STORAGE2_1: conn( Disconnecting -> StandAlone )
[ 991.282537] drbd VM_STORAGE2_1: State change failed: Need a
connection to start verify or resync
[ 991.282540] drbd VM_STORAGE2_2: State change failed: Need a
connection to start verify or resync
[ 991.282541] drbd VM_STORAGE2_2: mask = 0x1f0 val = 0x80
[ 991.282544] drbd VM_STORAGE2_2: old_conn:StandAlone
wanted_conn:WFConnection
[ 991.282545] drbd VM_STORAGE2_2: receiver terminated
[ 991.282546] drbd VM_STORAGE2_2: Terminating drbd_r_VM_STORA
[ 991.283005] drbd VM_STORAGE2_1: mask = 0x1f0 val = 0x80
[ 991.283076] drbd VM_STORAGE2_1: old_conn:StandAlone
wanted_conn:WFConnection
[ 991.283149] drbd VM_STORAGE2_1: receiver terminated
[ 991.283220] drbd VM_STORAGE2_1: Terminating drbd_r_VM_STORA
next reply other threads:[~2014-10-03 19:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-03 19:33 Igor Novgorodov [this message]
2014-10-06 15:34 ` [Drbd-dev] Bug in latest 8.4-git Lars Ellenberg
2014-10-06 16:21 ` Igor Novgorodov
2014-10-08 9:37 ` Lars Ellenberg
2014-10-08 10:31 ` Igor Novgorodov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542EFA18.9060705@novg.net \
--to=igor@novg.net \
--cc=drbd-dev@lists.linbit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.