diff for duplicates of <54324922.906@gmail.com> diff --git a/a/1.txt b/N1/1.txt index c909d08..8230aa5 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,10 +1,10 @@ On 06.10.2014 01:11, Benoit Masson wrote: -> > Le 3 oct. 2014 ? 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit : +> > Le 3 oct. 2014 à 17:41, Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a écrit : >> On 10/03/2014 05:29 PM, Benoit Masson wrote: ->>> Le 3 oct. 2014 ? 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit : +>>> Le 3 oct. 2014 à 17:06, Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a écrit : >>>> On 10/03/2014 04:11 PM, Jason Cooper wrote: >>>>> On Sun, Sep 21, 2014 at 04:11:23PM +0200, Benoit Masson wrote: ->>>>>>> Le 19 sept. 2014 ? 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit : +>>>>>>> Le 19 sept. 2014 à 22:14, Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a écrit : >> [...] >>>>>>> Patches are based on v3.17-rc1 and intended for v3.18 but I am not in >>>>>>> a hurry. I only compile tested this, so a formal Tested-by from Benoit @@ -54,7 +54,7 @@ early console. > dump of the serial output: > Uncompressing Linux... done, booting the kernel. > Booting Linux on physical CPU 0x0 -> Linux version 3.17.0-rc1-42264-gb065757 (benoitm at aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014 +> Linux version 3.17.0-rc1-42264-gb065757 (benoitm@aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014 > CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d > CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache > Machine model: Lenovo Iomega ix4-300d @@ -94,10 +94,10 @@ don't need DEBUG_LL at all. > scsi host1: sata_mv > scsi host2: sata_mv > scsi host3: sata_mv -> ata1: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8022000 irq 86 -> ata2: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8024000 irq 86 -> ata3: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8026000 irq 86 -> ata4: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8028000 irq 86 +> ata1: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8022000 irq 86 +> ata2: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8024000 irq 86 +> ata3: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8026000 irq 86 +> ata4: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8028000 irq 86 Shouldn't it detect your hard-disks attached here? @@ -151,3 +151,9 @@ Sebastian > rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 > i2c /dev entries driver > rtc-pcf8563 0-0051: chip found, driver version 0.4.3 + + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index da2aa62..6007c3d 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -5,19 +5,29 @@ "ref\0A9781A2E-F3CA-4E8A-833C-D167B456D9F7@perenite.com\0" "ref\0542EC3A3.1060605@gmail.com\0" "ref\01ACB5318-863E-40D8-8B27-41F1C0D0A4B8@perenite.com\0" - "From\0sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)\0" - "Subject\0[PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes\0" + "ref\01ACB5318-863E-40D8-8B27-41F1C0D0A4B8-+V3Jd3LB6RBWk0Htik3J/w@public.gmane.org\0" + "From\0Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes\0" "Date\0Mon, 06 Oct 2014 09:47:46 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Benoit Masson <benoitm-+V3Jd3LB6RBWk0Htik3J/w@public.gmane.org>\0" + "Cc\0Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>" + Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> + Gregory Clement <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Benoit Masson <yahoo-+V3Jd3LB6RBWk0Htik3J/w@public.gmane.org> + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + " linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" "\00:1\0" "b\0" "On 06.10.2014 01:11, Benoit Masson wrote:\n" - "> > Le 3 oct. 2014 ? 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit :\n" + "> > Le 3 oct. 2014 \303\240 17:41, Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a \303\251crit :\n" ">> On 10/03/2014 05:29 PM, Benoit Masson wrote:\n" - ">>> Le 3 oct. 2014 ? 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit :\n" + ">>> Le 3 oct. 2014 \303\240 17:06, Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a \303\251crit :\n" ">>>> On 10/03/2014 04:11 PM, Jason Cooper wrote:\n" ">>>>> On Sun, Sep 21, 2014 at 04:11:23PM +0200, Benoit Masson wrote:\n" - ">>>>>>> Le 19 sept. 2014 ? 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit :\n" + ">>>>>>> Le 19 sept. 2014 \303\240 22:14, Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a \303\251crit :\n" ">> [...]\n" ">>>>>>> Patches are based on v3.17-rc1 and intended for v3.18 but I am not in\n" ">>>>>>> a hurry. I only compile tested this, so a formal Tested-by from Benoit\n" @@ -67,7 +77,7 @@ "> dump of the serial output:\n" "> Uncompressing Linux... done, booting the kernel.\n" "> Booting Linux on physical CPU 0x0\n" - "> Linux version 3.17.0-rc1-42264-gb065757 (benoitm at aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014\n" + "> Linux version 3.17.0-rc1-42264-gb065757 (benoitm@aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014\n" "> CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d\n" "> CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache\n" "> Machine model: Lenovo Iomega ix4-300d\n" @@ -107,10 +117,10 @@ "> scsi host1: sata_mv\n" "> scsi host2: sata_mv\n" "> scsi host3: sata_mv\n" - "> ata1: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8022000 irq 86\n" - "> ata2: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8024000 irq 86\n" - "> ata3: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8026000 irq 86\n" - "> ata4: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8028000 irq 86\n" + "> ata1: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8022000 irq 86\n" + "> ata2: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8024000 irq 86\n" + "> ata3: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8026000 irq 86\n" + "> ata4: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8028000 irq 86\n" "\n" "Shouldn't it detect your hard-disks attached here?\n" "\n" @@ -163,6 +173,12 @@ "> usbcore: registered new interface driver usb-storage\n" "> rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0\n" "> i2c /dev entries driver\n" - > rtc-pcf8563 0-0051: chip found, driver version 0.4.3 + "> rtc-pcf8563 0-0051: chip found, driver version 0.4.3\n" + "\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -2194446b5fa09e06cb747eccc2bcdb0b25e287005a909dfa115b6bd61397c110 +96afae09b9a09290b7924251954cc9d90b9d784ad0243686c68ab3199585b9c4
diff --git a/a/1.txt b/N2/1.txt index c909d08..c124fee 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,10 +1,10 @@ On 06.10.2014 01:11, Benoit Masson wrote: -> > Le 3 oct. 2014 ? 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit : +> > Le 3 oct. 2014 à 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a écrit : >> On 10/03/2014 05:29 PM, Benoit Masson wrote: ->>> Le 3 oct. 2014 ? 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit : +>>> Le 3 oct. 2014 à 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a écrit : >>>> On 10/03/2014 04:11 PM, Jason Cooper wrote: >>>>> On Sun, Sep 21, 2014 at 04:11:23PM +0200, Benoit Masson wrote: ->>>>>>> Le 19 sept. 2014 ? 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit : +>>>>>>> Le 19 sept. 2014 à 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a écrit : >> [...] >>>>>>> Patches are based on v3.17-rc1 and intended for v3.18 but I am not in >>>>>>> a hurry. I only compile tested this, so a formal Tested-by from Benoit @@ -54,7 +54,7 @@ early console. > dump of the serial output: > Uncompressing Linux... done, booting the kernel. > Booting Linux on physical CPU 0x0 -> Linux version 3.17.0-rc1-42264-gb065757 (benoitm at aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014 +> Linux version 3.17.0-rc1-42264-gb065757 (benoitm@aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014 > CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d > CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache > Machine model: Lenovo Iomega ix4-300d @@ -94,10 +94,10 @@ don't need DEBUG_LL at all. > scsi host1: sata_mv > scsi host2: sata_mv > scsi host3: sata_mv -> ata1: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8022000 irq 86 -> ata2: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8024000 irq 86 -> ata3: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8026000 irq 86 -> ata4: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8028000 irq 86 +> ata1: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8022000 irq 86 +> ata2: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8024000 irq 86 +> ata3: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8026000 irq 86 +> ata4: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8028000 irq 86 Shouldn't it detect your hard-disks attached here? diff --git a/a/content_digest b/N2/content_digest index da2aa62..17057c5 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -5,19 +5,28 @@ "ref\0A9781A2E-F3CA-4E8A-833C-D167B456D9F7@perenite.com\0" "ref\0542EC3A3.1060605@gmail.com\0" "ref\01ACB5318-863E-40D8-8B27-41F1C0D0A4B8@perenite.com\0" - "From\0sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)\0" - "Subject\0[PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes\0" + "From\0Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>\0" + "Subject\0Re: [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes\0" "Date\0Mon, 06 Oct 2014 09:47:46 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Benoit Masson <benoitm@perenite.com>\0" + "Cc\0Jason Cooper <jason@lakedaemon.net>" + Andrew Lunn <andrew@lunn.ch> + Gregory Clement <gregory.clement@free-electrons.com> + Ezequiel Garcia <ezequiel.garcia@free-electrons.com> + Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + Benoit Masson <yahoo@perenite.com> + devicetree@vger.kernel.org <devicetree@vger.kernel.org> + linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org> + " linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>\0" "\00:1\0" "b\0" "On 06.10.2014 01:11, Benoit Masson wrote:\n" - "> > Le 3 oct. 2014 ? 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit :\n" + "> > Le 3 oct. 2014 \303\240 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a \303\251crit :\n" ">> On 10/03/2014 05:29 PM, Benoit Masson wrote:\n" - ">>> Le 3 oct. 2014 ? 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit :\n" + ">>> Le 3 oct. 2014 \303\240 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a \303\251crit :\n" ">>>> On 10/03/2014 04:11 PM, Jason Cooper wrote:\n" ">>>>> On Sun, Sep 21, 2014 at 04:11:23PM +0200, Benoit Masson wrote:\n" - ">>>>>>> Le 19 sept. 2014 ? 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a ?crit :\n" + ">>>>>>> Le 19 sept. 2014 \303\240 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> a \303\251crit :\n" ">> [...]\n" ">>>>>>> Patches are based on v3.17-rc1 and intended for v3.18 but I am not in\n" ">>>>>>> a hurry. I only compile tested this, so a formal Tested-by from Benoit\n" @@ -67,7 +76,7 @@ "> dump of the serial output:\n" "> Uncompressing Linux... done, booting the kernel.\n" "> Booting Linux on physical CPU 0x0\n" - "> Linux version 3.17.0-rc1-42264-gb065757 (benoitm at aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014\n" + "> Linux version 3.17.0-rc1-42264-gb065757 (benoitm@aaaa) (gcc version 4.6.3 (Debian 4.6.3-14) ) #3 SMP Mon Oct 6 00:42:59 CEST 2014\n" "> CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d\n" "> CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache\n" "> Machine model: Lenovo Iomega ix4-300d\n" @@ -107,10 +116,10 @@ "> scsi host1: sata_mv\n" "> scsi host2: sata_mv\n" "> scsi host3: sata_mv\n" - "> ata1: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8022000 irq 86\n" - "> ata2: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8024000 irq 86\n" - "> ata3: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8026000 irq 86\n" - "> ata4: SATA max UDMA/133 mmio m1048576 at 0xf8000000 port 0xf8028000 irq 86\n" + "> ata1: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8022000 irq 86\n" + "> ata2: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8024000 irq 86\n" + "> ata3: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8026000 irq 86\n" + "> ata4: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8028000 irq 86\n" "\n" "Shouldn't it detect your hard-disks attached here?\n" "\n" @@ -165,4 +174,4 @@ "> i2c /dev entries driver\n" > rtc-pcf8563 0-0051: chip found, driver version 0.4.3 -2194446b5fa09e06cb747eccc2bcdb0b25e287005a909dfa115b6bd61397c110 +399c3713f2e5f5c4fd4f6921a9164e2e2fba802d1b8eaf3cad76f6a4ab286070
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.