From: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
To: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: Jens Axboe <axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org>,
Sagi Grimberg <sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Sebastian Parschauer
<sebastian.riemer-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>,
Robert Elliott <Elliott-VXdhtT5mjnY@public.gmane.org>,
Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>,
"linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-rdma <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH v2 05/12] IB/srp: Move ib_destroy_cm_id() call into srp_free_ch_ib()
Date: Tue, 07 Oct 2014 15:04:25 +0200 [thread overview]
Message-ID: <5433E4D9.60500@acm.org> (raw)
In-Reply-To: <5433E43D.3010107-HInyCGIudOg@public.gmane.org>
The patch that adds multichannel support into the SRP initiator
driver introduces an additional call to srp_free_ch_ib(). This
patch helps to keep that later patch simple.
Signed-off-by: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Reviewed-by: Sagi Grimberg <sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: Sebastian Parschauer <sebastian.riemer-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 62d2a18..d3c712f 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -555,6 +555,11 @@ static void srp_free_target_ib(struct srp_target_port *target)
struct srp_device *dev = target->srp_host->srp_dev;
int i;
+ if (target->cm_id) {
+ ib_destroy_cm_id(target->cm_id);
+ target->cm_id = NULL;
+ }
+
if (dev->use_fast_reg) {
if (target->fr_pool)
srp_destroy_fr_pool(target->fr_pool);
@@ -868,7 +873,6 @@ static void srp_remove_target(struct srp_target_port *target)
scsi_remove_host(target->scsi_host);
srp_stop_rport_timers(target->rport);
srp_disconnect_target(target);
- ib_destroy_cm_id(target->cm_id);
srp_free_target_ib(target);
cancel_work_sync(&target->tl_err_work);
srp_rport_put(target->rport);
@@ -3043,7 +3047,7 @@ static ssize_t srp_create_target(struct device *dev,
if (ret) {
shost_printk(KERN_ERR, target->scsi_host,
PFX "Connection failed\n");
- goto err_cm_id;
+ goto err_free_ib;
}
ret = srp_add_target(host, target);
@@ -3067,9 +3071,6 @@ out:
err_disconnect:
srp_disconnect_target(target);
-err_cm_id:
- ib_destroy_cm_id(target->cm_id);
-
err_free_ib:
srp_free_target_ib(target);
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-07 13:04 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 13:01 [PATCH v2 0/12] IB/srp: Add multichannel support Bart Van Assche
2014-10-07 13:03 ` [PATCH v2 02/12] blk-mq: Add blk_mq_unique_tag() Bart Van Assche
2014-10-11 11:08 ` Christoph Hellwig
2014-10-13 9:21 ` Bart Van Assche
[not found] ` <543B99B2.1010307-HInyCGIudOg@public.gmane.org>
2014-10-13 10:15 ` Christoph Hellwig
2014-10-19 16:14 ` Sagi Grimberg
[not found] ` <5433E493.9030304-HInyCGIudOg@public.gmane.org>
2014-10-28 1:55 ` Martin K. Petersen
2014-10-07 13:04 ` [PATCH v2 04/12] scsi_tcq.h: Add support for multiple hardware queues Bart Van Assche
2014-10-19 16:12 ` Sagi Grimberg
[not found] ` <5443E2DF.1040605-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-10-20 12:01 ` Bart Van Assche
[not found] ` <5444F995.5080407-HInyCGIudOg@public.gmane.org>
2014-10-21 8:49 ` Christoph Hellwig
2014-10-21 8:59 ` Sagi Grimberg
2014-10-28 2:06 ` Martin K. Petersen
[not found] ` <5433E43D.3010107-HInyCGIudOg@public.gmane.org>
2014-10-07 13:02 ` [PATCH v2 01/12] blk-mq: Use all available " Bart Van Assche
2014-10-07 14:37 ` Jens Axboe
[not found] ` <5433FA8F.3050100-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org>
2014-10-08 13:21 ` Bart Van Assche
[not found] ` <54353A74.7040406-HInyCGIudOg@public.gmane.org>
2014-10-11 11:11 ` Christoph Hellwig
[not found] ` <20141011111114.GB9593-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2014-10-13 9:45 ` Bart Van Assche
[not found] ` <543B9F47.2090204-HInyCGIudOg@public.gmane.org>
2014-10-17 13:20 ` Christoph Hellwig
[not found] ` <20141017132053.GF16538-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2014-10-17 14:11 ` Sagi Grimberg
2014-10-07 13:03 ` [PATCH v2 03/12] scsi-mq: Add support for multiple " Bart Van Assche
[not found] ` <5433E4AB.8030306-HInyCGIudOg@public.gmane.org>
2014-10-19 15:54 ` Sagi Grimberg
2014-10-28 2:01 ` Martin K. Petersen
2014-10-29 12:22 ` Bart Van Assche
2014-10-29 12:27 ` Bart Van Assche
[not found] ` <5450DD49.6090108-HInyCGIudOg@public.gmane.org>
2014-10-30 0:53 ` Martin K. Petersen
2014-10-07 13:04 ` Bart Van Assche [this message]
2014-10-07 13:04 ` [PATCH v2 06/12] IB/srp: Remove stale connection retry mechanism Bart Van Assche
2014-10-07 13:05 ` [PATCH v2 09/12] IB/srp: Separate target and channel variables Bart Van Assche
2014-10-19 16:48 ` Sagi Grimberg
2014-10-07 13:06 ` [PATCH v2 11/12] IB/srp: Eliminate free_reqs list Bart Van Assche
[not found] ` <5433E56E.6010600-HInyCGIudOg@public.gmane.org>
2014-10-17 10:59 ` Christoph Hellwig
[not found] ` <20141017105939.GB7819-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2014-10-19 16:59 ` Sagi Grimberg
2014-10-20 11:47 ` Bart Van Assche
2014-10-21 8:49 ` Christoph Hellwig
2014-10-07 13:05 ` [PATCH v2 07/12] IB/srp: Avoid that I/O hangs due to a cable pull during LUN scanning Bart Van Assche
2014-10-19 16:27 ` Sagi Grimberg
[not found] ` <5443E66F.7050901-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-10-20 12:15 ` Bart Van Assche
2014-10-21 8:50 ` Christoph Hellwig
2014-10-07 13:05 ` [PATCH v2 08/12] IB/srp: Introduce two new srp_target_port member variables Bart Van Assche
2014-10-19 16:30 ` Sagi Grimberg
2014-10-07 13:06 ` [PATCH v2 10/12] IB/srp: Use block layer tags Bart Van Assche
[not found] ` <5433E557.3010505-HInyCGIudOg@public.gmane.org>
2014-10-17 10:58 ` Christoph Hellwig
[not found] ` <20141017105858.GA7819-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2014-10-20 11:44 ` Bart Van Assche
2014-10-22 22:03 ` Elliott, Robert (Server Storage)
[not found] ` <94D0CD8314A33A4D9D801C0FE68B4029593212E0-wwDBVnaDRpYSZAcGdq5asR6epYMZPwEe5NbjCUgZEJk@public.gmane.org>
2014-10-23 7:16 ` Bart Van Assche
2014-10-23 17:43 ` Webb Scales
[not found] ` <54493E5A.7050803-VXdhtT5mjnY@public.gmane.org>
2014-10-24 6:45 ` Bart Van Assche
[not found] ` <5449F571.7080308-HInyCGIudOg@public.gmane.org>
2014-10-24 15:40 ` Webb Scales
2014-10-23 8:47 ` Christoph Hellwig
2014-10-24 4:43 ` Elliott, Robert (Server Storage)
2014-10-24 6:45 ` Christoph Hellwig
[not found] ` <20141024064514.GA15654-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2014-10-31 17:34 ` Hannes Reinecke
2014-11-03 7:52 ` Kashyap Desai
2014-11-03 8:25 ` Christoph Hellwig
2014-10-07 13:07 ` [PATCH v2 12/12] IB/srp: Add multichannel support Bart Van Assche
2014-10-17 11:01 ` EH action after scsi_remove_host, was: " Christoph Hellwig
2014-10-20 13:53 ` Bart Van Assche
2014-10-21 8:51 ` Christoph Hellwig
2014-10-17 11:06 ` Christoph Hellwig
[not found] ` <20141017110627.GD7819-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2014-10-20 11:57 ` Bart Van Assche
2014-10-21 8:49 ` Christoph Hellwig
[not found] ` <5433E585.607-HInyCGIudOg@public.gmane.org>
2014-10-19 17:36 ` Sagi Grimberg
2014-10-20 12:56 ` Bart Van Assche
[not found] ` <54450690.709-HInyCGIudOg@public.gmane.org>
2014-10-21 9:10 ` Sagi Grimberg
[not found] ` <544622FE.5040906-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-10-28 18:32 ` Sagi Grimberg
[not found] ` <544FE13A.60807-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-10-29 10:52 ` Bart Van Assche
2014-10-30 14:19 ` Sagi Grimberg
2014-10-30 14:36 ` Bart Van Assche
[not found] ` <54524D08.4040203-HInyCGIudOg@public.gmane.org>
2014-10-30 15:06 ` Sagi Grimberg
[not found] ` <545253E3.7000009-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-10-30 15:19 ` Bart Van Assche
[not found] ` <545256E5.9010501-HInyCGIudOg@public.gmane.org>
2014-10-30 17:33 ` Sagi Grimberg
2014-10-31 9:19 ` Bart Van Assche
[not found] ` <5453541D.7040206-HInyCGIudOg@public.gmane.org>
2014-11-02 13:03 ` Sagi Grimberg
2014-11-03 1:46 ` Elliott, Robert (Server Storage)
2014-11-04 11:46 ` Bart Van Assche
[not found] ` <5458BC8B.40202-HInyCGIudOg@public.gmane.org>
2014-11-04 12:15 ` Sagi Grimberg
[not found] ` <5458C344.2040109-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-11-05 4:57 ` Elliott, Robert (Server Storage)
[not found] ` <94D0CD8314A33A4D9D801C0FE68B40295937104F-2m9nI20wMFwSZAcGdq5asR6epYMZPwEe5NbjCUgZEJk@public.gmane.org>
2014-11-05 11:22 ` Sagi Grimberg
2014-10-21 9:14 ` Sagi Grimberg
2014-10-29 12:36 ` Bart Van Assche
2014-10-30 14:22 ` Sagi Grimberg
2014-10-08 13:16 ` [PATCH] blk-mq: Use all available hardware queues Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5433E4D9.60500@acm.org \
--to=bvanassche-hinycgiudog@public.gmane.org \
--cc=Elliott-VXdhtT5mjnY@public.gmane.org \
--cc=axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org \
--cc=hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
--cc=sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=sebastian.riemer-EIkl63zCoXaH+58JC4qpiA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.