From: Florian Fainelli <f.fainelli@gmail.com>
To: Petri Gynther <pgynther@google.com>, netdev@vger.kernel.org
Cc: davem@davemloft.net
Subject: Re: [PATCH v2 net-next] net: bcmgenet: fix Tx ring priority programming
Date: Tue, 07 Oct 2014 10:07:42 -0700 [thread overview]
Message-ID: <54341DDE.4040909@gmail.com> (raw)
In-Reply-To: <20141007163001.85125100761@puck.mtv.corp.google.com>
On 10/07/2014 09:30 AM, Petri Gynther wrote:
> GENET MAC has three Tx ring priority registers:
> - GENET_x_TDMA_PRIORITY0 for queues 0-5
> - GENET_x_TDMA_PRIORITY1 for queues 6-11
> - GENET_x_TDMA_PRIORITY2 for queues 12-16
>
> Fix bcmgenet_init_multiq() to program them correctly.
Looks good to me, the register layout is correct for GENETv1 to v4, thanks!
>
> Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/net/ethernet/broadcom/genet/bcmgenet.c | 42 +++++++++++++++-----------
> drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 ++
> 2 files changed, 27 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index e0a6238..fff2634 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -191,8 +191,9 @@ enum dma_reg {
> DMA_STATUS,
> DMA_SCB_BURST_SIZE,
> DMA_ARB_CTRL,
> - DMA_PRIORITY,
> - DMA_RING_PRIORITY,
> + DMA_PRIORITY_0,
> + DMA_PRIORITY_1,
> + DMA_PRIORITY_2,
> };
>
> static const u8 bcmgenet_dma_regs_v3plus[] = {
> @@ -201,8 +202,9 @@ static const u8 bcmgenet_dma_regs_v3plus[] = {
> [DMA_STATUS] = 0x08,
> [DMA_SCB_BURST_SIZE] = 0x0C,
> [DMA_ARB_CTRL] = 0x2C,
> - [DMA_PRIORITY] = 0x30,
> - [DMA_RING_PRIORITY] = 0x38,
> + [DMA_PRIORITY_0] = 0x30,
> + [DMA_PRIORITY_1] = 0x34,
> + [DMA_PRIORITY_2] = 0x38,
> };
>
> static const u8 bcmgenet_dma_regs_v2[] = {
> @@ -211,8 +213,9 @@ static const u8 bcmgenet_dma_regs_v2[] = {
> [DMA_STATUS] = 0x08,
> [DMA_SCB_BURST_SIZE] = 0x0C,
> [DMA_ARB_CTRL] = 0x30,
> - [DMA_PRIORITY] = 0x34,
> - [DMA_RING_PRIORITY] = 0x3C,
> + [DMA_PRIORITY_0] = 0x34,
> + [DMA_PRIORITY_1] = 0x38,
> + [DMA_PRIORITY_2] = 0x3C,
> };
>
> static const u8 bcmgenet_dma_regs_v1[] = {
> @@ -220,8 +223,9 @@ static const u8 bcmgenet_dma_regs_v1[] = {
> [DMA_STATUS] = 0x04,
> [DMA_SCB_BURST_SIZE] = 0x0C,
> [DMA_ARB_CTRL] = 0x30,
> - [DMA_PRIORITY] = 0x34,
> - [DMA_RING_PRIORITY] = 0x3C,
> + [DMA_PRIORITY_0] = 0x34,
> + [DMA_PRIORITY_1] = 0x38,
> + [DMA_PRIORITY_2] = 0x3C,
> };
>
> /* Set at runtime once bcmgenet version is known */
> @@ -1696,7 +1700,8 @@ static void bcmgenet_init_multiq(struct net_device *dev)
> {
> struct bcmgenet_priv *priv = netdev_priv(dev);
> unsigned int i, dma_enable;
> - u32 reg, dma_ctrl, ring_cfg = 0, dma_priority = 0;
> + u32 reg, dma_ctrl, ring_cfg = 0;
> + u32 dma_priority[3] = {0, 0, 0};
>
> if (!netif_is_multiqueue(dev)) {
> netdev_warn(dev, "called with non multi queue aware HW\n");
> @@ -1721,22 +1726,25 @@ static void bcmgenet_init_multiq(struct net_device *dev)
>
> /* Configure ring as descriptor ring and setup priority */
> ring_cfg |= 1 << i;
> - dma_priority |= ((GENET_Q0_PRIORITY + i) <<
> - (GENET_MAX_MQ_CNT + 1) * i);
> dma_ctrl |= 1 << (i + DMA_RING_BUF_EN_SHIFT);
> +
> + dma_priority[DMA_PRIO_REG_INDEX(i)] |=
> + ((GENET_Q0_PRIORITY + i) << DMA_PRIO_REG_SHIFT(i));
> }
>
> + /* Set ring 16 priority and program the hardware registers */
> + dma_priority[DMA_PRIO_REG_INDEX(DESC_INDEX)] |=
> + ((GENET_Q0_PRIORITY + priv->hw_params->tx_queues) <<
> + DMA_PRIO_REG_SHIFT(DESC_INDEX));
> + bcmgenet_tdma_writel(priv, dma_priority[0], DMA_PRIORITY_0);
> + bcmgenet_tdma_writel(priv, dma_priority[1], DMA_PRIORITY_1);
> + bcmgenet_tdma_writel(priv, dma_priority[2], DMA_PRIORITY_2);
> +
> /* Enable rings */
> reg = bcmgenet_tdma_readl(priv, DMA_RING_CFG);
> reg |= ring_cfg;
> bcmgenet_tdma_writel(priv, reg, DMA_RING_CFG);
>
> - /* Use configured rings priority and set ring #16 priority */
> - reg = bcmgenet_tdma_readl(priv, DMA_RING_PRIORITY);
> - reg |= ((GENET_Q0_PRIORITY + priv->hw_params->tx_queues) << 20);
> - reg |= dma_priority;
> - bcmgenet_tdma_writel(priv, reg, DMA_PRIORITY);
> -
> /* Configure ring as descriptor ring and re-enable DMA if enabled */
> reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
> reg |= dma_ctrl;
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> index 321b1db..dbf524e 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> @@ -401,6 +401,8 @@ struct bcmgenet_mib_counters {
> #define DMA_ARBITER_MODE_MASK 0x03
> #define DMA_RING_BUF_PRIORITY_MASK 0x1F
> #define DMA_RING_BUF_PRIORITY_SHIFT 5
> +#define DMA_PRIO_REG_INDEX(q) ((q) / 6)
> +#define DMA_PRIO_REG_SHIFT(q) (((q) % 6) * DMA_RING_BUF_PRIORITY_SHIFT)
> #define DMA_RATE_ADJ_MASK 0xFF
>
> /* Tx/Rx Dma Descriptor common bits*/
>
next prev parent reply other threads:[~2014-10-07 17:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 16:30 [PATCH v2 net-next] net: bcmgenet: fix Tx ring priority programming Petri Gynther
2014-10-07 17:07 ` Florian Fainelli [this message]
2014-10-07 17:09 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54341DDE.4040909@gmail.com \
--to=f.fainelli@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=pgynther@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.