From: Martin Townsend <martin.townsend@xsilon.com>
To: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cc: linux-bluetooth@vger.kernel.org, linux-wpan@vger.kernel.org,
marcel@holtmann.org, alex.aring@gmail.com
Subject: Re: [PATCH bluetooth-next] 6lowpan: Use pskb_expand_head in IPHC decompression.
Date: Wed, 08 Oct 2014 13:52:23 +0100 [thread overview]
Message-ID: <54353387.3070007@xsilon.com> (raw)
In-Reply-To: <1412770375.2705.25.camel@jrissane-mobl.ger.corp.intel.com>
Hi Jukka,
I've misunderstood the constraints on pskb_expand_head. I don't suppose you could quickly try this patch it now uses skb_share_check to ensure skb->users == 1 and then I've put back in the skb_clone code that I took out which I think is causing the problem:
Many Thanks,
Martin.
Currently there are potentially 2 skb_copy_expand calls in IPHC
decompression. This patch replaces this with one call to
pskb_expand_head. It also checks to see if there is enough headroom
first to ensure it's only done if necessary.
As pskb_expand_head must only have one reference the calling code
now ensures this.
---
net/6lowpan/iphc.c | 51 +++++++++++++++++++++----------------------
net/bluetooth/6lowpan.c | 7 ++++++
net/ieee802154/6lowpan_rtnl.c | 5 +++++
3 files changed, 37 insertions(+), 26 deletions(-)
diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
index 142eef5..853b4b8 100644
--- a/net/6lowpan/iphc.c
+++ b/net/6lowpan/iphc.c
@@ -174,30 +174,22 @@ static int uncompress_context_based_src_addr(struct sk_buff *skb,
static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
struct net_device *dev, skb_delivery_cb deliver_skb)
{
- struct sk_buff *new;
int stat;
- new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
- GFP_ATOMIC);
- kfree_skb(skb);
-
- if (!new)
- return -ENOMEM;
-
- skb_push(new, sizeof(struct ipv6hdr));
- skb_reset_network_header(new);
- skb_copy_to_linear_data(new, hdr, sizeof(struct ipv6hdr));
+ skb_push(skb, sizeof(struct ipv6hdr));
+ skb_reset_network_header(skb);
+ skb_copy_to_linear_data(skb, hdr, sizeof(struct ipv6hdr));
- new->protocol = htons(ETH_P_IPV6);
- new->pkt_type = PACKET_HOST;
- new->dev = dev;
+ skb->protocol = htons(ETH_P_IPV6);
+ skb->pkt_type = PACKET_HOST;
+ skb->dev = dev;
raw_dump_table(__func__, "raw skb data dump before receiving",
- new->data, new->len);
+ skb->data, skb->len);
- stat = deliver_skb(new, dev);
+ stat = deliver_skb(skb, dev);
- kfree_skb(new);
+ consume_skb(skb);
return stat;
}
@@ -460,7 +452,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
/* UDP data uncompression */
if (iphc0 & LOWPAN_IPHC_NH_C) {
struct udphdr uh;
- struct sk_buff *new;
+ const int needed = sizeof(struct udphdr) + sizeof(hdr);
if (uncompress_udp_header(skb, &uh))
goto drop;
@@ -468,14 +460,13 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
/* replace the compressed UDP head by the uncompressed UDP
* header
*/
- new = skb_copy_expand(skb, sizeof(struct udphdr),
- skb_tailroom(skb), GFP_ATOMIC);
- kfree_skb(skb);
-
- if (!new)
- return -ENOMEM;
-
- skb = new;
+ if (skb_headroom(skb) < needed) {
+ err = pskb_expand_head(skb, needed, 0, GFP_ATOMIC);
+ if (unlikely(err)) {
+ kfree_skb(skb);
+ return err;
+ }
+ }
skb_push(skb, sizeof(struct udphdr));
skb_reset_transport_header(skb);
@@ -485,6 +476,14 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
(u8 *)&uh, sizeof(uh));
hdr.nexthdr = UIP_PROTO_UDP;
+ } else {
+ if (skb_headroom(skb) < sizeof(hdr)) {
+ err = pskb_expand_head(skb, sizeof(hdr), 0, GFP_ATOMIC);
+ if (unlikely(err)) {
+ kfree_skb(skb);
+ return err;
+ }
+ }
}
hdr.payload_len = htons(skb->len);
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index c2e0d14..6643a7c 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -343,6 +343,13 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
kfree_skb(local_skb);
kfree_skb(skb);
} else {
+ /* Decompression may use pskb_expand_head so no shared skb's */
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ if (!skb) {
+ dev->stats.rx_dropped++;
+ return NET_RX_DROP;
+ }
+
switch (skb->data[0] & 0xe0) {
case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */
local_skb = skb_clone(skb, GFP_ATOMIC);
diff --git a/net/ieee802154/6lowpan_rtnl.c b/net/ieee802154/6lowpan_rtnl.c
index c7e07b8..702ad04 100644
--- a/net/ieee802154/6lowpan_rtnl.c
+++ b/net/ieee802154/6lowpan_rtnl.c
@@ -537,6 +537,11 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *dev,
if (ret == NET_RX_DROP)
goto drop;
} else {
+ /* Decompression may use pskb_expand_head so no shared skb's */
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ if (!skb)
+ goto drop;
+
switch (skb->data[0] & 0xe0) {
case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */
ret = process_data(skb, &hdr);
--
1.9.1
next prev parent reply other threads:[~2014-10-08 12:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 15:33 [PATCH bluetooth-next] 6lowpan: Use pskb_expand_head in IPHC decompression Martin Townsend
2014-10-07 15:33 ` Martin Townsend
2014-10-07 15:37 ` Martin Townsend
2014-10-08 10:24 ` Jukka Rissanen
2014-10-08 11:07 ` Martin Townsend
2014-10-08 12:12 ` Jukka Rissanen
2014-10-08 12:52 ` Martin Townsend [this message]
2014-10-08 13:35 ` Jukka Rissanen
2014-10-08 13:42 ` Martin Townsend
2014-10-07 16:14 ` Alexander Aring
2014-10-07 16:17 ` Alexander Aring
2014-10-07 18:25 ` Martin Townsend
2014-10-07 18:58 ` Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54353387.3070007@xsilon.com \
--to=martin.townsend@xsilon.com \
--cc=alex.aring@gmail.com \
--cc=jukka.rissanen@linux.intel.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-wpan@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.