Re: [PATCH fixes 2/2] extcon: max77693: Fix always masked MUIC interrupts

[Chanwoo Choi <cw00.choi@samsung.com>]

On 10/10/2014 05:22 PM, Krzysztof Kozlowski wrote:
> All interrupts coming from MUIC were ignored because interrupt source
> register was masked.
> 
> The Maxim 77693 has a "interrupt source" - a separate register and interrupts
> which give information about PMIC block triggering the individual
> interrupt (charger, topsys, MUIC, flash LED).
> 
> By default bootloader could initialize this register to "mask all"
> value. In such case (observed on Trats2 board) MUIC interrupts won't be
> generated regardless of their mask status. Regmap irq chip was unmasking
> individual MUIC interrupts but the source was masked
> 
> Before introducing regmap irq chip this interrupt source was unmasked,
> read and acked. Reading and acking is not necessary but unmasking is. Do
> it in extcon driver.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: <stable@vger.kernel.org>
> Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> ---
>  drivers/extcon/extcon-max77693.c     | 16 ++++++++++++++++
>  include/linux/mfd/max77693-private.h |  5 +++++
>  2 files changed, 21 insertions(+)
> 
> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> index 490e27475bac..d3adacf3187f 100644
> --- a/drivers/extcon/extcon-max77693.c
> +++ b/drivers/extcon/extcon-max77693.c
> @@ -1176,6 +1176,22 @@ static int max77693_muic_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	if (i) {
> +		/*
> +		 * i>0, at least one MUIC interrupt requested so need to unmask
> +		 * MUIC interrupt in INTSRC register. Without that MUIC
> +		 * interrupts will not be reported.
> +		 */
> +		ret = regmap_update_bits(max77693->regmap,
> +				MAX77693_PMIC_REG_INTSRC_MASK, SRC_IRQ_MUIC,
> +				~SRC_IRQ_MUIC);
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "Could not unmask MUIC interrupt in INTSRC: %d\n",
> +					ret);
> +			return ret;
> +		}
> +	}
> +

No,
The extcon-max77693 driver cannot enable IRQ_CHARGER/TOP/FLASH
because MAX77693_PMIC_REG_INTSRC_MASK register is common register of MAX77693.

The IRQ_CHARGER/TOP/FLASH of MAX77693_PMIC_REG_INTSRC_MASK register should be enabled
in drivers/mfd/max77693.c.

>  	/* Initialize extcon device */
>  	info->edev = devm_extcon_dev_allocate(&pdev->dev,
>  					      max77693_extcon_cable);
> diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
> index e1b2b61285b9..4f1a80b66ecf 100644
> --- a/include/linux/mfd/max77693-private.h
> +++ b/include/linux/mfd/max77693-private.h
> @@ -438,6 +438,11 @@ enum max77693_irq_source {
>  	MAX77693_IRQ_GROUP_NR,
>  };
>  
> +#define SRC_IRQ_CHARGER			BIT(0)
> +#define SRC_IRQ_TOP			BIT(1)
> +#define SRC_IRQ_FLASH			BIT(2)
> +#define SRC_IRQ_MUIC			BIT(3)
> +
>  #define LED_IRQ_FLED2_OPEN		BIT(0)
>  #define LED_IRQ_FLED2_SHORT		BIT(1)
>  #define LED_IRQ_FLED1_OPEN		BIT(2)
>