From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] socfpga-cyclone5 Dev board support
Date: Sun, 12 Oct 2014 16:06:00 +0200 [thread overview]
Message-ID: <543A8AC8.9000808@mind.be> (raw)
In-Reply-To: <1399342751-7799-1-git-send-email-cdhmanning@gmail.com>
On 06/05/14 04:19, Charles Manning wrote:
> This is somewhat derived from the SocKit booard support.
>
> It uses a fresher Linux and u-boot than SocKit. It also speeds the
> serial port up to 115200.
>
> Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Hi Charles,
Sorry for the late response - better late than never :).
Basically, it looks good to me, so
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
but I have some minor comments below.
> ---
> board/altera/cyclone5/post-image.sh | 10 ++++++++++
> board/altera/cyclone5/readme.txt | 3 +++
> configs/altera_cyclone5_defconfig | 29 +++++++++++++++++++++++++++++
> 3 files changed, 42 insertions(+)
> create mode 100755 board/altera/cyclone5/post-image.sh
> create mode 100644 board/altera/cyclone5/readme.txt
> create mode 100644 configs/altera_cyclone5_defconfig
>
> diff --git a/board/altera/cyclone5/post-image.sh b/board/altera/cyclone5/post-image.sh
> new file mode 100755
> index 0000000..ad70922
> --- /dev/null
> +++ b/board/altera/cyclone5/post-image.sh
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +#
> +# Altera Cyclone 5 Development Board post processing.
> +#
> +# A rip-off of the Sockit board support
> +# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
> +# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
> +
> +# create a DTB file copy with the name expected by the u-boot config
> +cp -af $BINARIES_DIR/socfpga_cyclone5_socdk.dtb $BINARIES_DIR/socfpga.dtb
Since it is a single file, -a is a bit weird. And personally I'd make it an
ln -f instead, but that's a matter of taste.
> diff --git a/board/altera/cyclone5/readme.txt b/board/altera/cyclone5/readme.txt
> new file mode 100644
> index 0000000..fe5a758
> --- /dev/null
> +++ b/board/altera/cyclone5/readme.txt
> @@ -0,0 +1,3 @@
> +Modifications to make a Cyclone 5 setup. This is derived from the buildroot
> +config first done for SocKit board. See boards/altera/sockit
Maybe it's better to copy at least part of the text from that readme, because
not all of it applies (e.g. the U-Boot patch).
> +
> diff --git a/configs/altera_cyclone5_defconfig b/configs/altera_cyclone5_defconfig
> new file mode 100644
> index 0000000..df3b8c6
> --- /dev/null
> +++ b/configs/altera_cyclone5_defconfig
> @@ -0,0 +1,29 @@
> +BR2_arm=y
> +BR2_cortex_a9=y
> +BR2_ARM_EABIHF=y
> +BR2_ARM_ENABLE_NEON=y
> +BR2_ARM_FPU_NEON=y
> +BR2_ARM_INSTRUCTIONS_THUMB2=y
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="3.13.5"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/cyclone5/post-image.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.rocketboards.org/linux-socfpga.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-3.13_14.02.02"
If you repost, could you try with rel_socfpga-3.16_14.09.02 ? That would of
course also mean updating the kernel headers version.
> +BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_socdk"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_3=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.rocketboards.org/u-boot-socfpga.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_socfpga_v2013.01.01_14.02.02"
Same here.
Regards,
Arnout
> +BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/altera/cyclone5"
> +BR2_TARGET_UBOOT_FORMAT_IMG=y
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2014-10-12 14:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 2:19 [Buildroot] [PATCH] socfpga-cyclone5 Dev board support Charles Manning
2014-10-12 14:06 ` Arnout Vandecappelle [this message]
2015-07-12 22:00 ` [Buildroot] [PATCH v2] configs: add altera_socdk_defconfig for Altera Cyclone 5 Development Board Arnout Vandecappelle
2015-07-13 0:10 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=543A8AC8.9000808@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.