All of lore.kernel.org
 help / color / mirror / Atom feed
From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR
Date: Tue, 14 Oct 2014 13:14:10 -0700	[thread overview]
Message-ID: <543D8412.1080402@freescale.com> (raw)
In-Reply-To: <1412600096-3928-1-git-send-email-Ashish.Kumar@freescale.com>

On 10/06/2014 05:54 AM, Ashish Kumar wrote:
>  * fdt_fixup_mtdparts is called from ft_board_setup
>  * run "mtdparts default" to create NAND, NOR partition on uboot
>  * Use mtdparts to create partitions dynamically rather
>     than using static partitions in device tree
> 
> Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com>
> ---
>  board/freescale/bsc9132qds/bsc9132qds.c |   12 ++++++++++++
>  include/configs/BSC9132QDS.h            |   21 +++++++++++++++++++++
>  2 files changed, 33 insertions(+), 0 deletions(-)
> 
> diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
> index 10580bc..c88838b 100644
> --- a/board/freescale/bsc9132qds/bsc9132qds.c
> +++ b/board/freescale/bsc9132qds/bsc9132qds.c
> @@ -21,6 +21,9 @@
>  #include <hwconfig.h>
>  #include <i2c.h>
>  #include <fsl_ddr_sdram.h>
> +#include <jffs2/load_kernel.h>
> +#include <mtd_node.h>
> +#include <flash.h>
>  
>  #ifdef CONFIG_PCI
>  #include <pci.h>
> @@ -354,6 +357,12 @@ void fdt_del_node_compat(void *blob, const char *compatible)
>  }
>  
>  #if defined(CONFIG_OF_BOARD_SETUP)
> +#ifdef CONFIG_FDT_FIXUP_PARTITIONS
> +struct node_info nodes[] = {
> +	{ "cfi-flash",			MTD_DEV_TYPE_NOR,  },
> +	{ "fsl,ifc-nand",		MTD_DEV_TYPE_NAND, },
> +};
> +#endif
>  void ft_board_setup(void *blob, bd_t *bd)
>  {
>  	phys_addr_t base;
> @@ -369,6 +378,9 @@ void ft_board_setup(void *blob, bd_t *bd)
>  	#endif
>  
>  	fdt_fixup_memory(blob, (u64)base, (u64)size);
> +#ifdef CONFIG_FDT_FIXUP_PARTITIONS
> +	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
> +#endif
>  
>  	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
>  	u32 porbmsr = in_be32(&gur->porbmsr);
> diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
> index aeded6d..da78a19 100644
> --- a/include/configs/BSC9132QDS.h
> +++ b/include/configs/BSC9132QDS.h
> @@ -630,6 +630,27 @@ combinations. this should be removed later
>  #endif
>  
>  /*
> + * Dynamic MTD Partition support with mtdparts
> + */
> +#ifndef CONFIG_SYS_NO_FLASH
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_FLASH_CFI_MTD
> +#define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
> +#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
> +			"55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
> +			"8m(kernel),512k(dtb),-(fs)"
> +#endif


Isn't this patch conflict with your earlier patch?
http://patchwork.ozlabs.org/patch/391991/

York

  reply	other threads:[~2014-10-14 20:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-06 12:54 [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR Ashish Kumar
2014-10-14 20:14 ` York Sun [this message]
2014-10-14 20:19   ` Ashish Kumar
2014-10-14 20:21     ` York Sun
     [not found]       ` <c86d04d90d2d49589f832d1130b7e2c4@BL2PR03MB276.namprd03.prod.outlook.com>
2014-10-15 15:31         ` York Sun
2014-11-14 21:28 ` York Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=543D8412.1080402@freescale.com \
    --to=yorksun@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.