All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: John Crispin <blogic@openwrt.org>, Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org, linux-mips@linux-mips.org
Subject: Re: [PATCH V2] watchdog: add MT7621 watchdog support
Date: Thu, 16 Oct 2014 06:48:04 -0700	[thread overview]
Message-ID: <543FCC94.1020102@roeck-us.net> (raw)
In-Reply-To: <1413454099-2836-1-git-send-email-blogic@openwrt.org>

On 10/16/2014 03:08 AM, John Crispin wrote:
> This patch adds support for the watchdog core found on newer mediatek/ralink
> Wifi SoCs.
>
> Signed-off-by: John Crispin <blogic@openwrt.org>
> ---
> Changes since V1
>
> * fix the comments identifying the driver
> * add a comment to the code setting the prescaler
> * use watchdog_init_timeout
> * use devm_reset_control_get
> * get rid of the miscdev code
>
>   .../devicetree/bindings/watchdog/mt7621-wdt.txt    |   12 ++
>   drivers/watchdog/Kconfig                           |    7 +
>   drivers/watchdog/Makefile                          |    1 +
>   drivers/watchdog/mt7621_wdt.c                      |  186 ++++++++++++++++++++
>   4 files changed, 206 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
>   create mode 100644 drivers/watchdog/mt7621_wdt.c
>
> diff --git a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
> new file mode 100644
> index 0000000..c15ef0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
> @@ -0,0 +1,12 @@
> +Ralink Watchdog Timers
> +
> +Required properties:
> +- compatible: must be "mediatek,mt7621-wdt"
> +- reg: physical base address of the controller and length of the register range
> +
> +Example:
> +
> +	watchdog@100 {
> +		compatible = "mediatek,mt7621-wdt";
> +		reg = <0x100 0x10>;
> +	};
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312f..9ee0d32 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1186,6 +1186,13 @@ config RALINK_WDT
>   	help
>   	  Hardware driver for the Ralink SoC Watchdog Timer.
>
> +config MT7621_WDT
> +	tristate "Mediatek SoC watchdog"
> +	select WATCHDOG_CORE
> +	depends on SOC_MT7620 || SOC_MT7621

There is no SOC_MT7621 symbol, at least not in the current kernel.

> +	help
> +	  Hardware driver for the Mediatek/Ralink SoC Watchdog Timer.
> +
How about mentioning the supported chips (7620 ? 7621 ? 7628 ?)

>   # PARISC Architecture
>
>   # POWERPC Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c320..5b2031e 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -138,6 +138,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
>   octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
>   obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
>   obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
> +obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
>
>   # PARISC Architecture
>
> diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
> new file mode 100644
> index 0000000..0cb9e0b
> --- /dev/null
> +++ b/drivers/watchdog/mt7621_wdt.c
> @@ -0,0 +1,186 @@
> +/*
> + * Ralink MT7621/MT7628 built-in hardware watchdog timer
> + *
MT7628 or MT7620 ?

Thanks,
Guenter

> + * Copyright (C) 2014 John Crispin <blogic@openwrt.org>
> + *
> + * This driver was based on: drivers/watchdog/rt2880_wdt.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/reset.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/watchdog.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/mach-ralink/ralink_regs.h>
> +
> +#define SYSC_RSTSTAT			0x38
> +#define WDT_RST_CAUSE			BIT(1)
> +
> +#define RALINK_WDT_TIMEOUT		30
> +
> +#define TIMER_REG_TMRSTAT		0x00
> +#define TIMER_REG_TMR1LOAD		0x24
> +#define TIMER_REG_TMR1CTL		0x20
> +
> +#define TMR1CTL_ENABLE			BIT(7)
> +#define TMR1CTL_RESTART			BIT(9)
> +#define TMR1CTL_PRESCALE_SHIFT		16
> +
> +static void __iomem *mt7621_wdt_base;
> +static struct reset_control *mt7621_wdt_reset;
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> +		 "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static inline void rt_wdt_w32(unsigned reg, u32 val)
> +{
> +	iowrite32(val, mt7621_wdt_base + reg);
> +}
> +
> +static inline u32 rt_wdt_r32(unsigned reg)
> +{
> +	return ioread32(mt7621_wdt_base + reg);
> +}
> +
> +static int mt7621_wdt_ping(struct watchdog_device *w)
> +{
> +	rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
> +
> +	return 0;
> +}
> +
> +static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
> +{
> +	w->timeout = t;
> +	rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
> +	mt7621_wdt_ping(w);
> +
> +	return 0;
> +}
> +
> +static int mt7621_wdt_start(struct watchdog_device *w)
> +{
> +	u32 t;
> +
> +	/* set the prescaler to 1ms == 1000us */
> +	rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT);
> +
> +	mt7621_wdt_set_timeout(w, w->timeout);
> +
> +	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
> +	t |= TMR1CTL_ENABLE;
> +	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
> +
> +	return 0;
> +}
> +
> +static int mt7621_wdt_stop(struct watchdog_device *w)
> +{
> +	u32 t;
> +
> +	mt7621_wdt_ping(w);
> +
> +	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
> +	t &= ~TMR1CTL_ENABLE;
> +	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
> +
> +	return 0;
> +}
> +
> +static int mt7621_wdt_bootcause(void)
> +{
> +	if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
> +		return WDIOF_CARDRESET;
> +
> +	return 0;
> +}
> +
> +static struct watchdog_info mt7621_wdt_info = {
> +	.identity = "Mediatek Watchdog",
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> +};
> +
> +static struct watchdog_ops mt7621_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = mt7621_wdt_start,
> +	.stop = mt7621_wdt_stop,
> +	.ping = mt7621_wdt_ping,
> +	.set_timeout = mt7621_wdt_set_timeout,
> +};
> +
> +static struct watchdog_device mt7621_wdt_dev = {
> +	.info = &mt7621_wdt_info,
> +	.ops = &mt7621_wdt_ops,
> +	.min_timeout = 1,
> +	.max_timeout = 0xfffful / 1000,
> +};
> +
> +static int mt7621_wdt_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	int ret;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	mt7621_wdt_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(mt7621_wdt_base))
> +		return PTR_ERR(mt7621_wdt_base);
> +
> +	mt7621_wdt_reset = devm_reset_control_get(&pdev->dev, NULL);
> +	if (!IS_ERR(mt7621_wdt_reset))
> +		reset_control_deassert(mt7621_wdt_reset);
> +
> +	mt7621_wdt_dev.dev = &pdev->dev;
> +	mt7621_wdt_dev.bootstatus = mt7621_wdt_bootcause();
> +
> +	watchdog_init_timeout(&mt7621_wdt_dev, mt7621_wdt_dev.max_timeout, &pdev->dev);
> +	watchdog_set_nowayout(&mt7621_wdt_dev, nowayout);
> +
> +	ret = watchdog_register_device(&mt7621_wdt_dev);
> +
> +	return 0;
> +}
> +
> +static int mt7621_wdt_remove(struct platform_device *pdev)
> +{
> +	watchdog_unregister_device(&mt7621_wdt_dev);
> +
> +	return 0;
> +}
> +
> +static void mt7621_wdt_shutdown(struct platform_device *pdev)
> +{
> +	mt7621_wdt_stop(&mt7621_wdt_dev);
> +}
> +
> +static const struct of_device_id mt7621_wdt_match[] = {
> +	{ .compatible = "mediatek,mt7621-wdt" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt7621_wdt_match);
> +
> +static struct platform_driver mt7621_wdt_driver = {
> +	.probe		= mt7621_wdt_probe,
> +	.remove		= mt7621_wdt_remove,
> +	.shutdown	= mt7621_wdt_shutdown,
> +	.driver		= {
> +		.name		= KBUILD_MODNAME,
> +		.owner		= THIS_MODULE,
> +		.of_match_table	= mt7621_wdt_match,
> +	},
> +};
> +
> +module_platform_driver(mt7621_wdt_driver);
> +
> +MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver");
> +MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
> +MODULE_LICENSE("GPL v2");
>

  parent reply	other threads:[~2014-10-16 13:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-16 10:08 [PATCH V2] watchdog: add MT7621 watchdog support John Crispin
2014-10-16 10:10 ` John Crispin
2014-10-16 13:48 ` Guenter Roeck [this message]
2014-10-16 13:56   ` John Crispin
2014-10-16 15:17     ` Guenter Roeck
2014-10-16 16:36       ` John Crispin
2014-10-16 17:25         ` Guenter Roeck
2014-10-16 17:39           ` John Crispin
  -- strict thread matches above, loose matches on Subject: below --
2014-10-13 12:15 John Crispin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=543FCC94.1020102@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=blogic@openwrt.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.