From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>,
Chandra Seetharaman <sekharan@us.ibm.com>,
Mike Christie <michaelc@cs.wisc.edu>
Cc: Sean Stewart <Sean.Stewart@netapp.com>,
Bart Van Assche <bvanassche@acm.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/6] scsi: remove struct scsi_dh_devlist
Date: Mon, 20 Oct 2014 08:03:23 +0200 [thread overview]
Message-ID: <5444A5AB.3020008@suse.de> (raw)
In-Reply-To: <1413734404-1426-4-git-send-email-hch@lst.de>
On 10/19/2014 06:00 PM, Christoph Hellwig wrote:
> All drivers now do their own matching, so there is no more need to expose
> a device list as part of the interface.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/scsi/device_handler/scsi_dh_emc.c | 6 ++++--
> drivers/scsi/device_handler/scsi_dh_hp_sw.c | 6 ++++--
> drivers/scsi/device_handler/scsi_dh_rdac.c | 6 ++++--
> include/scsi/scsi_device.h | 6 ------
> 4 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
> index c2e26cd..800deb7 100644
> --- a/drivers/scsi/device_handler/scsi_dh_emc.c
> +++ b/drivers/scsi/device_handler/scsi_dh_emc.c
> @@ -622,7 +622,10 @@ done:
> return result;
> }
>
> -static const struct scsi_dh_devlist clariion_dev_list[] = {
> +static const struct {
> + char *vendor;
> + char *model;
> +} clariion_dev_list[] = {
> {"DGC", "RAID"},
> {"DGC", "DISK"},
> {"DGC", "VRAID"},
> @@ -653,7 +656,6 @@ static void clariion_bus_detach(struct scsi_device *sdev);
> static struct scsi_device_handler clariion_dh = {
> .name = CLARIION_NAME,
> .module = THIS_MODULE,
> - .devlist = clariion_dev_list,
> .attach = clariion_bus_attach,
> .detach = clariion_bus_detach,
> .check_sense = clariion_check_sense,
> diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
> index 040998c..aa40fcb 100644
> --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
> +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
> @@ -311,7 +311,10 @@ static int hp_sw_activate(struct scsi_device *sdev,
> return 0;
> }
>
> -static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
> +static const struct {
> + char *vendor;
> + char *model;
> +} hp_sw_dh_data_list[] = {
> {"COMPAQ", "MSA1000 VOLUME"},
> {"COMPAQ", "HSV110"},
> {"HP", "HSV100"},
> @@ -343,7 +346,6 @@ static void hp_sw_bus_detach(struct scsi_device *sdev);
> static struct scsi_device_handler hp_sw_dh = {
> .name = HP_SW_NAME,
> .module = THIS_MODULE,
> - .devlist = hp_sw_dh_data_list,
> .attach = hp_sw_bus_attach,
> .detach = hp_sw_bus_detach,
> .activate = hp_sw_activate,
> diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
> index ef8caaa..8b09528 100644
> --- a/drivers/scsi/device_handler/scsi_dh_rdac.c
> +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
> @@ -778,7 +778,10 @@ static int rdac_check_sense(struct scsi_device *sdev,
> return SCSI_RETURN_NOT_HANDLED;
> }
>
> -static const struct scsi_dh_devlist rdac_dev_list[] = {
> +static const struct {
> + char *vendor;
> + char *model;
> +} rdac_dev_list[] = {
> {"IBM", "1722"},
> {"IBM", "1724"},
> {"IBM", "1726"},
> @@ -830,7 +833,6 @@ static void rdac_bus_detach(struct scsi_device *sdev);
> static struct scsi_device_handler rdac_dh = {
> .name = RDAC_NAME,
> .module = THIS_MODULE,
> - .devlist = rdac_dev_list,
> .prep_fn = rdac_prep_fn,
> .check_sense = rdac_check_sense,
> .attach = rdac_bus_attach,
> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
> index fb46864..ba6c9b7 100644
> --- a/include/scsi/scsi_device.h
> +++ b/include/scsi/scsi_device.h
> @@ -201,11 +201,6 @@ struct scsi_device {
> unsigned long sdev_data[0];
> } __attribute__((aligned(sizeof(unsigned long))));
>
> -struct scsi_dh_devlist {
> - char *vendor;
> - char *model;
> -};
> -
> typedef void (*activate_complete)(void *, int);
> struct scsi_device_handler {
> /* Used by the infrastructure */
> @@ -214,7 +209,6 @@ struct scsi_device_handler {
> /* Filled by the hardware handler */
> struct module *module;
> const char *name;
> - const struct scsi_dh_devlist *devlist;
> int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
> int (*attach)(struct scsi_device *);
> void (*detach)(struct scsi_device *);
>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
next prev parent reply other threads:[~2014-10-20 6:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-19 15:59 device handler cleanups Christoph Hellwig
2014-10-19 15:59 ` [PATCH 1/6] scsi_dh: get module reference outside of device handler Christoph Hellwig
2014-10-20 6:01 ` Hannes Reinecke
2014-10-20 6:53 ` Christoph Hellwig
2014-10-20 8:06 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 2/6] scsi: use container_of to get at device handler private data Christoph Hellwig
2014-10-20 6:02 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 3/6] scsi: remove struct scsi_dh_devlist Christoph Hellwig
2014-10-20 6:03 ` Hannes Reinecke [this message]
2014-10-19 16:00 ` [PATCH 4/6] scsi: device handlers must have attach and detach methods Christoph Hellwig
2014-10-20 6:04 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 5/6] scsi_dh_hp_sw: fix return value on failed allocation Christoph Hellwig
2014-10-20 6:04 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 6/6] scsi: handle more device handler setup/teardown in common code Christoph Hellwig
2014-10-20 6:06 ` Hannes Reinecke
2014-10-28 17:53 ` Mike Christie
2014-10-30 9:00 ` Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2014-10-30 9:19 device handler cleanups V2 Christoph Hellwig
2014-10-30 9:19 ` [PATCH 3/6] scsi: remove struct scsi_dh_devlist Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5444A5AB.3020008@suse.de \
--to=hare@suse.de \
--cc=Sean.Stewart@netapp.com \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
--cc=sekharan@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.