From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] at91: sam9x5 dt: add usart dma definitions to dt
Date: Tue, 21 Oct 2014 18:38:51 +0200 [thread overview]
Message-ID: <54468C1B.9070500@atmel.com> (raw)
In-Reply-To: <20141014122423.GA2797@ldesroches-Latitude-E6320>
On 14/10/2014 14:24, Ludovic Desroches :
> On Mon, Oct 13, 2014 at 11:02:16AM +0200, Jiri Prchal wrote:
>> This patch adds usart dma definitions to both dtsi for sam9x5 chips. Without
>> usage of dma it's unable to catch all bytes on usart receiver.
>>
>> Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Stacked on top of at91-3.19-dt. Thanks!
>> v2: Add only definitions, enable them in board file.
>> ---
>> arch/arm/boot/dts/at91sam9x5.dtsi | 12 ++++++++++++
>> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 3 +++
>> 2 files changed, 15 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
>> index 726274f..bbb3ba6 100644
>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>> @@ -860,6 +860,9 @@
>> interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_dbgu>;
>> + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
>> + <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
>> + dma-names = "tx", "rx";
>> clocks = <&mck>;
>> clock-names = "usart";
>> status = "disabled";
>> @@ -871,6 +874,9 @@
>> interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_usart0>;
>> + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
>> + <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
>> + dma-names = "tx", "rx";
>> clocks = <&usart0_clk>;
>> clock-names = "usart";
>> status = "disabled";
>> @@ -882,6 +888,9 @@
>> interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_usart1>;
>> + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
>> + <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
>> + dma-names = "tx", "rx";
>> clocks = <&usart1_clk>;
>> clock-names = "usart";
>> status = "disabled";
>> @@ -893,6 +902,9 @@
>> interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_usart2>;
>> + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
>> + <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
>> + dma-names = "tx", "rx";
>> clocks = <&usart2_clk>;
>> clock-names = "usart";
>> status = "disabled";
>> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>> index 140217a5..43bb5b5 100644
>> --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>> @@ -57,6 +57,9 @@
>> interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_usart3>;
>> + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
>> + <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
>> + dma-names = "tx", "rx";
>> clocks = <&usart3_clk>;
>> clock-names = "usart";
>> status = "disabled";
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Nicolas Ferre
next prev parent reply other threads:[~2014-10-21 16:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-13 9:02 [PATCH] at91: sam9x5 dt: add usart dma definitions to dt Jiri Prchal
2014-10-14 12:24 ` Ludovic Desroches
2014-10-21 16:38 ` Nicolas Ferre [this message]
[not found] ` <54477097.1050909@aksignal.cz>
2014-12-17 20:16 ` at91: dt: dma usage Alexandre Belloni
2014-12-17 21:49 ` Arnd Bergmann
2015-01-09 15:42 ` Ludovic Desroches
-- strict thread matches above, loose matches on Subject: below --
2014-10-10 6:35 [PATCH] at91: sam9x5 dt: add usart dma definitions to dt Jiri Prchal
2014-10-10 8:12 ` Ludovic Desroches
2014-10-10 8:39 ` Nicolas Ferre
2014-10-10 9:22 ` Jiří Prchal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54468C1B.9070500@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.