From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella
Date: Tue, 21 Oct 2014 23:07:58 +0200 [thread overview]
Message-ID: <5446CB2E.4080503@suse.de> (raw)
In-Reply-To: <CAOesGMhSuvbWpM5CC_5Hy6BskM6sbrw0SCR90aKHvfk1Qm1_Ng@mail.gmail.com>
Am 21.10.2014 um 23:01 schrieb Olof Johansson:
> On Tue, Oct 21, 2014 at 1:52 PM, Andreas F?rber <afaerber@suse.de> wrote:
>> Am 18.10.2014 um 06:28 schrieb Olof Johansson:
>>> I did a test run with yesterday's -next It looks like networking isn't
>>> working there at the moment, clock related. Same happens with 3.17 and
>>> latest mainline, config multi_v7_defconfig:
>>>
>>> [WARN] [ 7.943648] macb e000b000.ethernet eth0: unable to generate
>>> target frequency: 125000000 Hz
>>> [WARN] [ 10.948681] macb e000b000.ethernet eth0: unable to generate
>>> target frequency: 125000000 Hz
>>
>> I am unable to reproduce this in my setup - at Linus' tip
>> c2661b806092d8ea2dccb7b02b65776555e0ee47 (v3.18-rc1-68-gc2661b8), make
>> oldconfig'ing my /proc/config.gz.
>>
>> S?ren, in light of your explanations, should I be expecting problems
>> with 1GbE or with 100MbE? My board is connected to a 1GbE switch.
>
> My board might have old firmware/bitstream on it? It reports as:
>
> U-Boot 2012.10-00003-g792c31c (Jan 03 2014 - 12:24:08)
Mine reports the same version.
sha512sum of non-headless bitstream:
decb37222a7da0de39b1c1eb95714500cc006506cc86d85ed9c6c7b30c7cd7b91ef3592b886311f4285b5ce0079b4ffcd83f91ae275435ac15cefefe7db00b08
/mnt/parallella.bit.bin
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
WARNING: multiple messages have this Message-ID (diff)
From: "Andreas Färber" <afaerber@suse.de>
To: Olof Johansson <olof@lixom.net>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>,
"Michal Simek" <michal.simek@xilinx.com>,
"Andreas Olofsson" <andreas@adapteva.com>,
"Matteo Vit" <matteo.vit@starwaredesign.com>,
"Sean Rickerd" <srickerd@suse.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Punnaiah Choudary Kalluri" <punnaia@xilinx.com>,
"Lars-Peter Clausen" <lars@metafoo.de>
Subject: Re: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella
Date: Tue, 21 Oct 2014 23:07:58 +0200 [thread overview]
Message-ID: <5446CB2E.4080503@suse.de> (raw)
In-Reply-To: <CAOesGMhSuvbWpM5CC_5Hy6BskM6sbrw0SCR90aKHvfk1Qm1_Ng@mail.gmail.com>
Am 21.10.2014 um 23:01 schrieb Olof Johansson:
> On Tue, Oct 21, 2014 at 1:52 PM, Andreas Färber <afaerber@suse.de> wrote:
>> Am 18.10.2014 um 06:28 schrieb Olof Johansson:
>>> I did a test run with yesterday's -next It looks like networking isn't
>>> working there at the moment, clock related. Same happens with 3.17 and
>>> latest mainline, config multi_v7_defconfig:
>>>
>>> [WARN] [ 7.943648] macb e000b000.ethernet eth0: unable to generate
>>> target frequency: 125000000 Hz
>>> [WARN] [ 10.948681] macb e000b000.ethernet eth0: unable to generate
>>> target frequency: 125000000 Hz
>>
>> I am unable to reproduce this in my setup - at Linus' tip
>> c2661b806092d8ea2dccb7b02b65776555e0ee47 (v3.18-rc1-68-gc2661b8), make
>> oldconfig'ing my /proc/config.gz.
>>
>> Sören, in light of your explanations, should I be expecting problems
>> with 1GbE or with 100MbE? My board is connected to a 1GbE switch.
>
> My board might have old firmware/bitstream on it? It reports as:
>
> U-Boot 2012.10-00003-g792c31c (Jan 03 2014 - 12:24:08)
Mine reports the same version.
sha512sum of non-headless bitstream:
decb37222a7da0de39b1c1eb95714500cc006506cc86d85ed9c6c7b30c7cd7b91ef3592b886311f4285b5ce0079b4ffcd83f91ae275435ac15cefefe7db00b08
/mnt/parallella.bit.bin
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2014-10-21 21:07 UTC|newest]
Thread overview: 167+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 23:00 [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:00 ` [PATCH v2 01/11] Documentation: devicetree: Adapteva vendor prefix Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-25 8:01 ` Michal Simek
2014-07-25 8:01 ` Michal Simek
2014-07-25 8:01 ` Michal Simek
2014-07-24 23:00 ` [PATCH v2 02/11] Documentation: devicetree: Adapteva boards Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-25 8:01 ` Michal Simek
2014-07-25 8:01 ` Michal Simek
2014-07-25 8:01 ` Michal Simek
2014-07-24 23:00 ` [PATCH v2 03/11] ARM: dts: zynq: Add Parallella device tree Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-25 8:02 ` Michal Simek
2014-07-25 8:02 ` Michal Simek
2014-07-24 23:00 ` [PATCH v2 04/11] ARM: dts: zynq: Update deprecated xuartps clock names Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:09 ` Sören Brinkmann
2014-07-24 23:09 ` Sören Brinkmann
2014-07-24 23:09 ` Sören Brinkmann
2014-07-24 23:13 ` Andreas Färber
2014-07-24 23:13 ` Andreas Färber
2014-07-24 23:24 ` Sören Brinkmann
2014-07-24 23:24 ` Sören Brinkmann
2014-07-24 23:24 ` Sören Brinkmann
2014-07-25 7:38 ` Michal Simek
2014-07-25 7:38 ` Michal Simek
2014-07-24 23:00 ` [PATCH v2 05/11] ARM: dts: zynq: Add QSPI for Parallella Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:18 ` Sören Brinkmann
2014-07-24 23:18 ` Sören Brinkmann
2014-07-24 23:18 ` Sören Brinkmann
2014-07-25 7:59 ` Michal Simek
2014-07-25 7:59 ` Michal Simek
2014-07-25 7:59 ` Michal Simek
2014-07-25 8:42 ` Andreas Färber
2014-07-25 8:42 ` Andreas Färber
2014-07-25 9:38 ` Michal Simek
2014-07-25 9:38 ` Michal Simek
2014-07-25 9:38 ` Michal Simek
2014-07-25 11:12 ` [PATCH v3] ARM: dts: zynq: Add SPI Andreas Färber
2014-07-25 11:12 ` Andreas Färber
2014-07-25 11:12 ` Andreas Färber
2014-07-25 14:42 ` Sören Brinkmann
2014-07-25 14:42 ` Sören Brinkmann
2014-07-25 14:42 ` Sören Brinkmann
[not found] ` <20140725144223.GB16049@xsjandreislx>
2014-07-28 9:11 ` Michal Simek
2014-07-28 9:11 ` Michal Simek
2014-07-28 9:11 ` Michal Simek
[not found] ` <53D2258B.9000609@xilinx.com>
2014-07-25 10:31 ` [PATCH v2 05/11] ARM: dts: zynq: Add QSPI for Parallella Harini Katakam
2014-07-25 10:31 ` Harini Katakam
2014-07-25 10:31 ` Harini Katakam
2014-07-25 10:43 ` Andreas Färber
2014-07-25 10:43 ` Andreas Färber
2014-07-25 10:43 ` Andreas Färber
2014-07-25 10:47 ` Harini Katakam
2014-07-25 10:47 ` Harini Katakam
2014-07-25 10:47 ` Harini Katakam
2014-07-24 23:00 ` [PATCH v2 06/11] ARM: dts: zynq: Add DMAC " Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:28 ` Sören Brinkmann
2014-07-24 23:28 ` Sören Brinkmann
2014-07-24 23:28 ` Sören Brinkmann
2014-07-25 8:02 ` Michal Simek
2014-07-25 8:02 ` Michal Simek
2014-07-25 8:02 ` Michal Simek
2014-07-25 8:24 ` Andreas Färber
2014-07-25 8:24 ` Andreas Färber
2014-07-25 8:24 ` Andreas Färber
2014-07-25 8:36 ` Michal Simek
2014-07-25 8:36 ` Michal Simek
2014-07-25 8:36 ` Michal Simek
2014-07-25 14:43 ` Sören Brinkmann
2014-07-25 14:43 ` Sören Brinkmann
2014-07-25 14:43 ` Sören Brinkmann
2014-07-24 23:00 ` [PATCH v2 07/11] Documentation: devicetree: Fix Xilinx VDMA specification Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-25 7:49 ` Michal Simek
2014-07-25 7:49 ` Michal Simek
2014-07-25 7:49 ` Michal Simek
2014-07-25 8:46 ` Andreas Färber
2014-07-25 8:46 ` Andreas Färber
2014-07-25 8:46 ` Andreas Färber
2014-07-25 9:40 ` Michal Simek
2014-07-25 9:40 ` Michal Simek
2014-07-25 9:40 ` Michal Simek
[not found] ` <53D225F2.4070504@xilinx.com>
2014-07-25 12:51 ` Srikanth Thokala
2014-07-25 12:51 ` Srikanth Thokala
2014-07-25 12:51 ` Srikanth Thokala
2014-07-24 23:00 ` [PATCH v2 08/11] ARM: dts: zynq: Add VDMA to Parallella Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:22 ` Sören Brinkmann
2014-07-24 23:22 ` Sören Brinkmann
2014-07-24 23:22 ` Sören Brinkmann
2014-07-25 9:47 ` Andreas Färber
2014-07-25 9:47 ` Andreas Färber
2014-07-25 9:47 ` Andreas Färber
2014-07-25 14:49 ` Sören Brinkmann
2014-07-25 14:49 ` Sören Brinkmann
2014-07-25 14:49 ` Sören Brinkmann
2014-07-24 23:00 ` [PATCH v2 09/11] Documentation: devicetree: Fix ADI AXI SPDIF specification Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-25 7:42 ` Lars-Peter Clausen
2014-07-25 7:42 ` Lars-Peter Clausen
2014-07-25 7:42 ` Lars-Peter Clausen
2014-07-25 8:08 ` Michal Simek
2014-07-25 8:08 ` Michal Simek
2014-07-25 10:18 ` Mark Brown
2014-07-25 10:18 ` Mark Brown
2014-07-25 10:18 ` Mark Brown
2014-07-25 10:32 ` Andreas Färber
2014-07-25 10:32 ` Andreas Färber
2014-07-25 10:39 ` Mark Brown
2014-07-25 10:39 ` Mark Brown
2014-07-25 10:39 ` Mark Brown
2014-07-28 11:43 ` Andreas Färber
2014-07-28 11:43 ` Andreas Färber
2014-07-28 12:20 ` Mark Brown
2014-07-28 12:20 ` Mark Brown
2014-07-28 12:28 ` Andreas Färber
2014-07-28 12:28 ` Andreas Färber
2014-07-28 13:44 ` Mark Brown
2014-07-28 13:44 ` Mark Brown
2014-07-28 13:44 ` Mark Brown
2014-07-28 15:39 ` Andreas Färber
2014-07-28 15:39 ` Andreas Färber
2014-07-28 15:39 ` Andreas Färber
2014-07-28 21:28 ` Mark Brown
2014-07-28 21:28 ` Mark Brown
2014-07-24 23:00 ` [PATCH v2 10/11] ARM: dts: zynq: Add SPDIF for Parallella Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-24 23:00 ` [PATCH v2 11/11] ARM: dts: zynq: Add AXI clkgen " Andreas Färber
2014-07-24 23:00 ` Andreas Färber
2014-07-25 3:49 ` [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella Punnaiah Choudary Kalluri
2014-07-25 3:49 ` Punnaiah Choudary Kalluri
2014-07-25 3:49 ` Punnaiah Choudary Kalluri
2014-07-25 10:04 ` Andreas Färber
2014-07-25 10:04 ` Andreas Färber
2014-07-25 10:04 ` Andreas Färber
2014-07-28 16:17 ` Andreas Färber
2014-07-28 16:17 ` Andreas Färber
2014-07-28 16:17 ` Andreas Färber
2014-07-28 16:39 ` Lars-Peter Clausen
2014-07-28 16:39 ` Lars-Peter Clausen
2014-10-18 4:28 ` Olof Johansson
2014-10-18 4:28 ` Olof Johansson
2014-10-19 15:57 ` Soren Brinkmann
2014-10-19 15:57 ` Soren Brinkmann
2014-10-21 20:52 ` Andreas Färber
2014-10-21 20:52 ` Andreas Färber
2014-10-21 21:00 ` Sören Brinkmann
2014-10-21 21:00 ` Sören Brinkmann
2014-10-21 21:00 ` Sören Brinkmann
2014-10-21 21:01 ` Olof Johansson
2014-10-21 21:01 ` Olof Johansson
2014-10-21 21:07 ` Andreas Färber [this message]
2014-10-21 21:07 ` Andreas Färber
2014-10-21 21:18 ` Olof Johansson
2014-10-21 21:18 ` Olof Johansson
2014-10-22 13:22 ` Michal Simek
2014-10-22 13:22 ` Michal Simek
2014-10-22 13:22 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5446CB2E.4080503@suse.de \
--to=afaerber@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.