All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Snow <jsnow@redhat.com>
To: kvm@vger.kernel.org
Cc: stefan Hajnoczi <stefanha@redhat.com>
Subject: Infinite IRQ injection loop in QEMU
Date: Wed, 22 Oct 2014 11:33:41 -0400	[thread overview]
Message-ID: <5447CE55.4020308@redhat.com> (raw)

Hello all;

I've been working on improving the AHCI device emulation for QEMU but 
have recently run into an issue where Windows 8 guests -- upon trying to 
resume from hibernation -- manage to trigger an infinite IRQ injection 
loop where it seems that the IRQ never quite properly gets cleared.

I am still working on troubleshooting it further, but I wanted to see if 
anyone had advice or experience with this type of issue.

In a nutshell:
- Windows 8 boots up inside of QEMU/KVM
- Windows 8 is suspended to disk either via "shut down" or explicit 
hibernate. QEMU exits.
- Windows 8 is resumed
- Windows 8 resets the AHCI device and begins re-initializing it
- Once the active AHCI port is reset, it issues an interrupt to indicate 
it has a pending message (set of register values) ready for the host to 
synchronize state with the HBA. This interrupt appears to be legacy PCI 
and not MSI.
- This triggers an infinite injection loop.

Here are some characteristic traces from perf record, grabbing 
kvm-related entries with user space traces.

Here's where the interrupt first appears to become stuck, showing when 
it is set: http://pastebin.com/KPevxCw2

It looks like pin #16, vec=177. All activity in the guest and QEMU now 
apparently ceases, and then the perf script shows many, many loops which 
look like the following: http://pastebin.com/qYh9035y

which repeats over-and-over. It does not appear that QEMU is re-setting 
the IRQ, and there are no further calls from the guest into ICH9 or AHCI 
related code to set/unset any device registers.

In talking with Stefan, we think that the irr bit is possibly not 
getting cleared (or getting set again?) after the EOI (see the first 
paste) -- does anyone have experience with debugging this type of issue, 
or have some hints about what may be happening?

Thanks in advance for any advice.
--John S.

(As a post-script: the kernel I am using is the version provided by 
David Airlie for MST [Multi-Stream Transport] support in Linux, which is 
still experimental. Sorry for the non-stock kernel! 
http://airlied.livejournal.com/79657.html)

             reply	other threads:[~2014-10-22 15:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-22 15:33 John Snow [this message]
2014-10-22 18:01 ` Infinite IRQ injection loop in QEMU Paolo Bonzini
2014-10-23 10:17   ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5447CE55.4020308@redhat.com \
    --to=jsnow@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.