From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Thu, 23 Oct 2014 13:43:00 +0000 Subject: Re: [lm-sensors] [PATCH 3/3] hwmon: (i5500_temp) Don't bind to disabled sensors Message-Id: <544905E4.7030701@roeck-us.net> List-Id: References: <20141022111321.22ab7122@endymion.delvare> In-Reply-To: <20141022111321.22ab7122@endymion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 10/23/2014 06:26 AM, Jean Delvare wrote: > On Thu, 23 Oct 2014 06:15:50 -0700, Guenter Roeck wrote: >> On 10/23/2014 01:44 AM, Jean Delvare wrote: >>> Another interesting register in device 00:14.2 is THRERRCTL. It's set >>> to 0x5 on the one working board I have access to, and to 0x0 on >>> non-working ones. >> >> Can you set it on the non-working boards ? > > Mind you, I tried that already, but it didn't help :( So either it is a > hardware issue (pins not connected as you suggested before) or it takes > a combination of changes to get it to work and we did not find all the > steps, or didn't apply them all at the same time, or not in the right > order... Maybe Romain will have more luck than me. > Should have guessed. Well, you can only do so much. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors