All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Siluvery, Arun" <arun.siluvery@linux.intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Add means to apply WA conditionally
Date: Thu, 23 Oct 2014 17:07:53 +0100	[thread overview]
Message-ID: <544927D9.2070403@linux.intel.com> (raw)
In-Reply-To: <20141023155125.GR26941@phenom.ffwll.local>

On 23/10/2014 16:51, Daniel Vetter wrote:
> On Thu, Oct 23, 2014 at 04:29:30PM +0100, Arun Siluvery wrote:
>> We would want to apply some of the workarounds based on a condition to a
>> particular platform or Gen but we may not know all possible controlling
>> parameters in advance hence allow to define open conditions; a WA makes
>> it to the list only if the condition is true.
>>
>> With the appropriate conditions we can combine all of the workarounds
>> and apply them from a single place irrespective of platform instead of
>> having them in separate functions.
>>
>> For: VIZ-4090
>> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
>
> Imo we should just pull the condition out into proper control flow. Hiding
> it like that in the macro doesn't seem to buy us anything at all, but
> obfuscates the code.

No we are not hiding the condition, I thought it would be easier to read 
it this way, e.g.,

WA_SET_BIT_MASKED_IF(IS_BDW_GT3(dev), WA_REG, WA_MASK);

do you prefer adding if(cond) to each WA?

regards
Arun

> -Daniel
>
>> ---
>>   drivers/gpu/drm/i915/intel_ringbuffer.c | 35 +++++++++++++++++++++++++++++++++
>>   1 file changed, 35 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
>> index 497b836..0525a5d 100644
>> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
>> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
>> @@ -736,6 +736,41 @@ static int wa_add(struct drm_i915_private *dev_priv,
>>
>>   #define WA_WRITE(addr, val) WA_REG(addr, val, 0xffffffff)
>>
>> +#define WA_SET_BIT_MASKED_IF(cond, addr, mask)		\
>> +	do {						\
>> +		if (cond) {				\
>> +			WA_SET_BIT_MASKED(addr, mask);	\
>> +		}					\
>> +	} while(0)
>> +
>> +#define WA_CLR_BIT_MASKED_IF(cond, addr, mask)		\
>> +	do {						\
>> +		if (cond) {				\
>> +			WA_CLR_BIT_MASKED(addr, mask);	\
>> +		}					\
>> +	} while(0)
>> +
>> +#define WA_SET_BIT_IF(cond, addr, mask)			\
>> +	do {						\
>> +		if (cond) {				\
>> +			WA_SET_BIT(addr, mask);		\
>> +		}					\
>> +	} while(0)
>> +
>> +#define WA_CLR_BIT_IF(cond, addr, mask)			\
>> +	do {						\
>> +		if (cond) {				\
>> +			WA_CLR_BIT(addr, mask);		\
>> +		}					\
>> +	} while(0)
>> +
>> +#define WA_WRITE_IF(cond, addr, val)			\
>> +	do {						\
>> +		if (cond) {				\
>> +			WA_WRITE(addr, val);		\
>> +		}					\
>> +	} while(0)
>> +
>>   static int bdw_init_workarounds(struct intel_engine_cs *ring)
>>   {
>>   	struct drm_device *dev = ring->dev;
>> --
>> 2.1.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>

  reply	other threads:[~2014-10-23 16:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-23 15:29 [PATCH] drm/i915: Add means to apply WA conditionally Arun Siluvery
2014-10-23 15:51 ` Daniel Vetter
2014-10-23 16:07   ` Siluvery, Arun [this message]
2014-10-23 19:22     ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=544927D9.2070403@linux.intel.com \
    --to=arun.siluvery@linux.intel.com \
    --cc=daniel@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.