[BISECT] v3.18-rc1 doesn't boot on nitrogen6x i.MX6 board

[eric.nelson@boundarydevices.com (Eric Nelson)]

Thanks for the report Brian (and Fabio).

On 10/23/2014 01:46 PM, Fabio Estevam wrote:
> Hi Brian,
> 
> On Thu, Oct 23, 2014 at 6:30 PM, Brian Downing <bdowning@lavos.net> wrote:
>> Hi all; apologies for not posting to the linux-arm-kernel mailing list,
>> but lists.infradead.org seems, well, dead:
>>
>> $ host lists.infradead.org
>> Host lists.infradead.org not found: 3(NXDOMAIN)
>>
>> v3.18-rc1 doesn't boot on my Boundary Devices nitrogen6x board.
>> (Specifically, imx6q-nitrogen6x.dtb).  It fails before any console output.
>> I bisected it down to this commit:
>>
>> commit 3fce0e882f61513c45c67e15bd0fde03341b58a5
>> Author: Tim Harvey <tharvey@gateworks.com>
>> Date:   Thu Aug 7 23:36:40 2014 -0700
>>
>>     PCI: imx6: Delay enabling reference clock for SS until it stabilizes
>>
>>     According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable
>>     for SS function) must remain deasserted until the reference clock is
>>     running at the appropriate frequency.
>>
>>     Delay enabling the reference clock for the SS function until it has
>>     stabilized.  This prevents a high link failure rate (>5%) on certain IMX6
>>     boards at various temperatures.
>>
>>     [bhelgaas: reword changelog slightly]
>>     Tested-by: Fabio Estevam <festevam@gmail.com>
>>     Signed-off-by: Tim Harvey <tharvey@gateworks.com>
>>     Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>>     Acked-by: Marek Vasut <marex@denx.de>
>>     Acked-by: Lucas Stach <l.stach@pengutronix.de>
>>
>> With that one commit reverted v3.18-rc1 fires up just fine for me.
>>
>> I really haven't looked into what might be wrong, I just wanted to let
>> you know that this fix apparently breaks some boards.

We'll dig in and let you know what we find.

Regards,


Eric