From: "Stefan Bottelier | Ocius.nl" <stefan@ocius.nl>
To: netdev@vger.kernel.org
Subject: Problem with 10Gbit Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver
Date: Fri, 24 Oct 2014 10:42:52 +0200 [thread overview]
Message-ID: <544A110C.4030402@ocius.nl> (raw)
Hello,
We are using Dell Blade Centers, but we get a error on the 10Gbit
Broadcom adapter bnx2x
bnx2x 0000:01:00.0: part number 394D4342-31383735-30315430-473030
WARNING: at drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:9410
bnx2x_init_one+0x1194/0x32b9
Hardware name: PowerEdge M620
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.2.63 #1
Call Trace:
warn_slowpath_common+0x78/0xb0
bnx2x_init_one+0x1194/0x32b9
bnx2x_init_one+0x1194/0x32b9
warn_slowpath_null+0x1b/0x20
bnx2x_init_one+0x1194/0x32b9
load_balance+0xb5/0x600
soft_cursor+0x19d/0x220
idr_get_empty_slot+0xf2/0x290
sysfs_link_sibling+0x6a/0xb0
__sysfs_add_one+0x5b/0x100
ida_get_new_above+0x49/0x1e0
kmem_cache_alloc+0xa9/0xb0
sysfs_add_one+0x1c/0xe0
sysfs_addrm_finish+0x12/0x90
sysfs_new_dirent+0x6d/0xf0
sysfs_do_create_link+0xbe/0x1f0
notifier_call_chain+0x44/0x60
pci_device_probe+0xf7/0x100
driver_probe_device+0x60/0x1f0
pci_match_device+0xf/0xa0
driver_probe_device+0x1f0/0x1f0
driver_attach+0x79/0x80
bus_for_each_dev+0x38/0x70
driver_attach+0x16/0x20
driver_probe_device+0x1f0/0x1f0
bus_add_driver+0x16f/0x250
pci_dev_put+0x20/0x20
driver_register+0x63/0x130
process_scheduled_works+0x30/0x30
cnic_init+0x7f/0x7f
__pci_register_driver+0x3c/0xa0
cnic_init+0x7f/0x7f
bnx2x_init+0x71/0x94
do_one_initcall+0x112/0x160
kernel_init+0x10f/0x1ab
do_early_param+0x77/0x77
start_kernel+0x327/0x327
kernel_thread_helper+0x6/0xd
bnx2x 0000:01:00.0: irq 132 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 133 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 134 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 135 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 136 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 137 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 138 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 139 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 140 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 141 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 142 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 143 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 144 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 145 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 146 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 147 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 148 for MSI/MSI-X
bnx2x 0000:01:00.0: eth0: Added CNIC device
bnx2x 0000:01:00.1: part number 394D4342-31383735-30315430-473030
--
Met vriendelijke groet,
Stefan Bottelier
Ocius Internet Services
E: Stefan.Bottelier@ocius.nl
T: +31 (0)20 716 39 09
W: http://www.ocius.nl
next reply other threads:[~2014-10-24 9:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 8:42 Stefan Bottelier | Ocius.nl [this message]
2014-10-26 9:07 ` Problem with 10Gbit Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver Yuval Mintz
2014-10-27 8:42 ` Stefan Bottelier | Ocius.nl
[not found] ` <B5657A6538887040AD3A81F1008BEC63B860DB@avmb3.qlogic.org>
[not found] ` <544E6597.2040201@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86A3E@avmb3.qlogic.org>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86AD9@avmb3.qlogic.org>
[not found] ` <544F5454.3000103@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86E04@avmb3.qlogic.org>
[not found] ` <544F68D2.9090902@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86E89@avmb3.qlogic.org>
[not found] ` <544F6CA9.3080705@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86EA5@avmb3.qlogic.org>
[not found] ` <544F7B33.5020204@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86FA2@avmb3.qlogic.org>
[not found] ` <544F8C29.6040305@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B87028@avmb3.qlogic.org>
[not found] ` <544F8E96.2020904@ocius.nl>
[not found] ` <B5657A6538887 040AD3A81F1008BEC63B87612@avmb3.qlogic.org>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B87612@avmb3.qlogic.org>
2014-10-28 14:07 ` Stefan Bottelier | Ocius.nl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=544A110C.4030402@ocius.nl \
--to=stefan@ocius.nl \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.