Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 10/24/2014 4:03 PM, Laurent Pinchart wrote:

> Specify the DU output topology, enable the DU device and configure the
> related pins.

> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>   arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 81 insertions(+)

> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
> index 9e1b859190ca..64a5d634edc1 100644
> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> @@ -69,6 +69,76 @@
>   			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
>   		};
>   	};
> +
> +	vga-encoder {
> +		compatible = "adi,adv7123";
[...]
> +	lvds-enc {

    Using "lvds-encoder" would have been more consistent.

> +		compatible = "thine,thc63lvdm83d";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ports {
> +			port@0 {

    Hm, I don't see the "reg" prop, where is it?

> +				lvds_enc_in: endpoint {
> +					remote-endpoint = <&du_out_rgb1>;
> +				};
> +			};
> +			port@1 {
> +				lvds_connector: endpoint {
> +				};
> +			};
> +		};
> +	};
> +};
[...]

WBR, Sergei