From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] power_spi.c: Rewrite pmic_reg function
Date: Mon, 27 Oct 2014 09:53:20 +0100 [thread overview]
Message-ID: <544E0800.4030006@denx.de> (raw)
In-Reply-To: <1414237111-12162-1-git-send-email-trini@ti.com>
Hi Tom.
On 25/10/2014 13:38, Tom Rini wrote:
> The pmic_spi_free function isn't ever used, and as the frameworks stand
> today, cannot be, so remove it.
That's right - it was originally implemented to have a symmetric
interface, but never used.
> Integrate the probe function into
> pmic_reg as it's not really a "probe" today. Finally, add an err label
> for the common failure cases.
>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Przemyslaw Marczak <p.marczak@samsung.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Signed-off-by: Tom Rini <trini@ti.com>
> ---
> drivers/power/power_spi.c | 33 ++++++++++-----------------------
> 1 file changed, 10 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/power/power_spi.c b/drivers/power/power_spi.c
> index fb455a00..1e55446 100644
> --- a/drivers/power/power_spi.c
> +++ b/drivers/power/power_spi.c
> @@ -17,27 +17,14 @@
>
> static struct spi_slave *slave;
>
> -void pmic_spi_free(struct spi_slave *slave)
> -{
> - if (slave)
> - spi_free_slave(slave);
> -}
> -
> -struct spi_slave *pmic_spi_probe(struct pmic *p)
> -{
> - return spi_setup_slave(p->bus,
> - p->hw.spi.cs,
> - p->hw.spi.clk,
> - p->hw.spi.mode);
> -}
> -
> static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
> {
> u32 pmic_tx, pmic_rx;
> u32 tmp;
>
> if (!slave) {
> - slave = pmic_spi_probe(p);
> + slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk,
> + p->hw.spi.mode);
>
> if (!slave)
> return -1;
> @@ -54,25 +41,25 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
> tmp = cpu_to_be32(pmic_tx);
>
> if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
> - pmic_spi_flags)) {
> - spi_release_bus(slave);
> - return -1;
> - }
> + pmic_spi_flags))
> + goto err;
>
> if (write) {
> pmic_tx = p->hw.spi.prepare_tx(reg, val, 0);
> tmp = cpu_to_be32(pmic_tx);
> if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
> - pmic_spi_flags)) {
> - spi_release_bus(slave);
> - return -1;
> - }
> + pmic_spi_flags))
> + goto err;
> }
>
> spi_release_bus(slave);
> *val = cpu_to_be32(pmic_rx);
>
> return 0;
> +
> +err:
> + spi_release_bus(slave);
> + return -1;
> }
>
> int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2014-10-27 8:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-25 11:38 [U-Boot] [PATCH] power_spi.c: Rewrite pmic_reg function Tom Rini
2014-10-27 8:53 ` Stefano Babic [this message]
2014-11-10 21:26 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=544E0800.4030006@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.