From: "John H. Mountcastle" <mtcstle-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
To: Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>
Cc: "nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
Subject: Re: linux kernel 3.17, freeze on resume
Date: Wed, 29 Oct 2014 09:07:22 -0400 [thread overview]
Message-ID: <5450E68A.1030704@yahoo.com> (raw)
In-Reply-To: <CAKb7UvhprANm0zP5X1o6nZL=rt1m2iubx0HRq_9_dhc-91sh9A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 2482 bytes --]
I put the machine into hibernate by closing the lid. When I reactivated
it, the screen flashed once then went dark. I ssh'd from another machine
and grabbed dmesg, attached, It's been about ten minutes and the screen
is still dark and inert. I restarted gdm from my shell and poof, got a
login screeen. Oddly, when I log in, it displays the desktop for a
moment them locks the screen. Let me know if dmesg tells you anything,
it does not me. By the way, I'm running fedora Desktop which I believe
is gnome-shell, as you mentioned.
73 | *KB3KEY* | John | Mt.Airy,MD
On 10/25/2014 09:24 PM, Ilia Mirkin wrote:
> Can you grab a copy of dmesg after resume? Can you try waiting ~2
> minutes to see if gdm will restart on its own (due to X dying)? In
> general, nouveau is less-than-great at resuming while 3d applications
> are running. This used to be rare, but now people have things like
> gnome-shell/etc which complicate matters.
>
> On Sat, Oct 25, 2014 at 10:25 AM, John Mountcastle <mtcstle-/E1597aS9LQAvxtiuMwx3w@public.gmane.org> wrote:
>> This may not be the proper place to raise this question but I've had little
>> luck elsewhere.
>> After trying again, unsuccessfully this time, to install the proprietary
>> NVIDIA driver, I've decided to focus my efforts on the open source Nouveau
>> driver. I've seen video drivers blamed for varying degrees of "freeze on
>> resume" but I'm not certain that's what I'm up against. When I resume after
>> hibernate, Plymouth fails then I get a completely inert machine. Lights are
>> on but keyboard nor mouse will elicit any response. If I go to another
>> machine and ssh to a shell and do, #systemctl restart gdm, a clean Xdisplay
>> pops up showing the log in screen. Now all is well. I'm running Gnome 3 on
>> kernel 3.17.1-302.fc21.x86_64 on an HP Elitebook 8440p with NVIDIA GT218N
>> [NVS 3100M] GPU, 8 GIG RAM and SSD. Can you help me help you to help me?
>> Do you suppose this is an as yet unreported driver bug or something else. It
>> may be interesting to note that about one time in five to seven, the machine
>> hangs on a reboot before getting anything at all onto the screen.
>> __________________
>> Never believe the set of that which you understand rivals the universe of
>> that which may go wrong -- mtcstle
>>
>>
>> _______________________________________________
>> Nouveau mailing list
>> Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
>> http://lists.freedesktop.org/mailman/listinfo/nouveau
>>
[-- Attachment #1.2: Type: text/html, Size: 3326 bytes --]
[-- Attachment #2: dmesg.201410290851 --]
[-- Type: text/plain, Size: 83911 bytes --]
[ 0.000000] CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.1-304.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.1 20140930 (Red Hat 4.9.1-11) (GCC) ) #1 SMP Sat Oct 25 00:56:36 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.17.1-304.fc21.x86_64 root=/dev/mapper/fedora_patuxant-root ro rd.lvm.lv=fedora_patuxant/root rd.lvm.lv=fedora_patuxant/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000befc2000-0x00000000bf6c1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf6c2000-0x00000000bf7c1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7c2000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 8440p/172B, BIOS 68CCU Ver. F.11 11/25/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0202e000, 0x0202efff] PGTABLE
[ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
[ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbefc1fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbedfffff] page 2M
[ 0.000000] [mem 0xbee00000-0xbefc1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] BRK [0x02032000, 0x02032fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] BRK [0x02033000, 0x02033fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35bd3000-0x36de1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FDDC0 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000BF7FE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 0x00000000BF7FC000 0000F4 (v03 HPQOEM 172B 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BF7D6000 020167 (v02 HPQOEM 172B 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000BF760000 000040
[ 0.000000] ACPI: HPET 0x00000000BF7FB000 000038 (v01 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x00000000BF7FA000 0000BC (v01 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x00000000BF7F7000 000032 (v02 HPQOEM 172B 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7D5000 00064F (v01 HPQOEM SataPri 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7D4000 000692 (v01 HPQOEM SataSec 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7D2000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[ 0.000000] ACPI: SLIC 0x00000000BF7D1000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7D0000 000A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7CF000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7CE000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: ASF! 0x00000000BF7F8000 0000A0 (v32 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[ 0.000000] NODE_DATA [mem 0x23bfe6000-0x23bff9fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbefc1fff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x23bffffff]
[ 0.000000] On node 0 totalpages: 2060129
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12160 pages used for memmap
[ 0.000000] DMA32 zone: 778179 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbefc2000-0xbf6c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf6c2000-0xbf7c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7c2000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023bc00000 s88384 r8192 d22208 u262144
[ 0.000000] pcpu-alloc: s88384 r8192 d22208 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027660
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.1-304.fc21.x86_64 root=/dev/mapper/fedora_patuxant-root ro rd.lvm.lv=fedora_patuxant/root rd.lvm.lv=fedora_patuxant/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 8006940K/8240516K available (7463K kernel code, 1231K rwdata, 3252K rodata, 1468K init, 1540K bss, 233576K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:65792 nr_irqs:488 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2659.843 MHz processor
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.68 BogoMIPS (lpj=2659843)
[ 0.000034] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20140724
[ 0.012984] ACPI: All ACPI Tables successfully acquired
[ 0.033172] Security Framework initialized
[ 0.033181] SELinux: Initializing.
[ 0.033187] SELinux: Starting in permissive mode
[ 0.033816] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.035728] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036561] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036575] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036812] Initializing cgroup subsys memory
[ 0.036818] Initializing cgroup subsys devices
[ 0.036821] Initializing cgroup subsys freezer
[ 0.036824] Initializing cgroup subsys net_cls
[ 0.036826] Initializing cgroup subsys blkio
[ 0.036828] Initializing cgroup subsys perf_event
[ 0.036830] Initializing cgroup subsys net_prio
[ 0.036833] Initializing cgroup subsys hugetlb
[ 0.036855] CPU: Physical Processor ID: 0
[ 0.036856] CPU: Processor Core ID: 0
[ 0.036861] mce: CPU supports 9 MCE banks
[ 0.036871] CPU0: Thermal monitoring enabled (TM1)
[ 0.036881] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.036972] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[ 0.037906] ftrace: allocating 27196 entries in 107 pages
[ 0.050830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060835] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.162459] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.162476] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.162478] ... version: 3
[ 0.162479] ... bit width: 48
[ 0.162480] ... generic registers: 4
[ 0.162480] ... value mask: 0000ffffffffffff
[ 0.162481] ... max period: 000000007fffffff
[ 0.162482] ... fixed-purpose events: 3
[ 0.162483] ... event mask: 000000070000000f
[ 0.163976] x86: Booting SMP configuration:
[ 0.163978] .... node #0, CPUs: #1
[ 0.177337] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.177456] #2
[ 0.187899] CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.190809] #3
[ 0.204061] x86: Booted up 1 node, 4 CPUs
[ 0.204066] smpboot: Total of 4 processors activated (21278.74 BogoMIPS)
[ 0.206475] devtmpfs: initialized
[ 0.209354] PM: Registering ACPI NVS region [mem 0xbf6c2000-0xbf7c1fff] (1048576 bytes)
[ 0.210304] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.210306] pinctrl core: initialized pinctrl subsystem
[ 0.210352] RTC time: 12:42:15, date: 10/29/14
[ 0.210430] NET: Registered protocol family 16
[ 0.210568] cpuidle: using governor menu
[ 0.210633] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.210635] ACPI: bus type PCI registered
[ 0.210637] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.210712] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.210715] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.211170] PCI: Using configuration type 1 for base access
[ 0.214640] ACPI: Added _OSI(Module Device)
[ 0.214642] ACPI: Added _OSI(Processor Device)
[ 0.214643] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214644] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218096] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224783] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.235027] ACPI: Dynamic OEM Table Load:
[ 0.235034] ACPI: SSDT 0xFFFF88022FD12000 00047D (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.235463] ACPI: Dynamic OEM Table Load:
[ 0.235469] ACPI: SSDT 0xFFFF88022FDE2000 0008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.239676] ACPI: Dynamic OEM Table Load:
[ 0.239682] ACPI: SSDT 0xFFFF88022FDC2C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.242173] ACPI: Dynamic OEM Table Load:
[ 0.242178] ACPI: SSDT 0xFFFF88022FDED000 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.680268] ACPI: Interpreter enabled
[ 0.680276] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.680280] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.680293] ACPI: (supports S0 S3 S4 S5)
[ 0.680294] ACPI: Using IOAPIC for interrupt routing
[ 0.680321] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.681790] ACPI: Power Resource [APPR] (off)
[ 0.684925] ACPI: Power Resource [COMP] (on)
[ 0.685232] ACPI: Power Resource [LPP] (on)
[ 0.688550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.688556] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.689842] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.690531] PCI host bridge to bus 0000:00
[ 0.690534] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.690536] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.690537] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.690539] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.690541] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.690542] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[ 0.690543] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 0.690551] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.690568] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.690633] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.690665] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.690763] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.690792] pci 0000:00:16.0: reg 0x10: [mem 0xd7424000-0xd742400f 64bit]
[ 0.690886] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.690963] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.690986] pci 0000:00:16.3: reg 0x10: [io 0x6080-0x6087]
[ 0.690997] pci 0000:00:16.3: reg 0x14: [mem 0xd742a000-0xd742afff]
[ 0.691174] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.691199] pci 0000:00:19.0: reg 0x10: [mem 0xd7400000-0xd741ffff]
[ 0.691211] pci 0000:00:19.0: reg 0x14: [mem 0xd7429000-0xd7429fff]
[ 0.691221] pci 0000:00:19.0: reg 0x18: [io 0x6000-0x601f]
[ 0.691309] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.691351] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.691393] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.691418] pci 0000:00:1a.0: reg 0x10: [mem 0xd7428000-0xd74283ff]
[ 0.691526] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.691567] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.691611] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.691634] pci 0000:00:1b.0: reg 0x10: [mem 0xd7420000-0xd7423fff 64bit]
[ 0.691740] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.691785] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.691823] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.691925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.692006] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.692112] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.692157] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.692196] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.692301] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.692345] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.692393] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.692417] pci 0000:00:1d.0: reg 0x10: [mem 0xd7427000-0xd74273ff]
[ 0.692524] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.692565] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.692602] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.692702] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.692741] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.692908] pci 0000:00:1f.2: [8086:3b2e] type 00 class 0x01018a
[ 0.692929] pci 0000:00:1f.2: reg 0x10: [io 0x6078-0x607f]
[ 0.692940] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 0.692950] pci 0000:00:1f.2: reg 0x18: [io 0x6070-0x6077]
[ 0.692960] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 0.692971] pci 0000:00:1f.2: reg 0x20: [io 0x6050-0x605f]
[ 0.692981] pci 0000:00:1f.2: reg 0x24: [io 0x6040-0x604f]
[ 0.692995] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.692996] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.692998] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.692999] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.693108] pci 0000:00:1f.5: [8086:3b2d] type 00 class 0x010185
[ 0.693129] pci 0000:00:1f.5: reg 0x10: [io 0x6068-0x606f]
[ 0.693139] pci 0000:00:1f.5: reg 0x14: [io 0x608c-0x608f]
[ 0.693150] pci 0000:00:1f.5: reg 0x18: [io 0x6060-0x6067]
[ 0.693160] pci 0000:00:1f.5: reg 0x1c: [io 0x6088-0x608b]
[ 0.693170] pci 0000:00:1f.5: reg 0x20: [io 0x6030-0x603f]
[ 0.693181] pci 0000:00:1f.5: reg 0x24: [io 0x6020-0x602f]
[ 0.693298] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.693325] pci 0000:00:1f.6: reg 0x10: [mem 0xd7426000-0xd7426fff 64bit]
[ 0.693518] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
[ 0.693532] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.693544] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.693557] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.693565] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.693574] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.693683] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.693697] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[ 0.693839] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.693841] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.693843] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.693846] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.693909] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.693916] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
[ 0.694032] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[ 0.694036] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.694041] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
[ 0.694151] pci 0000:44:00.0: [8086:4239] type 00 class 0x028000
[ 0.694195] pci 0000:44:00.0: reg 0x10: [mem 0xd3200000-0xd3201fff 64bit]
[ 0.694397] pci 0000:44:00.0: PME# supported from D0 D3hot D3cold
[ 0.694439] pci 0000:44:00.0: System wakeup disabled by ACPI
[ 0.697093] pci 0000:00:1c.3: PCI bridge to [bus 44]
[ 0.697104] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.697195] pci 0000:45:06.0: [1180:0832] type 00 class 0x0c0010
[ 0.697209] pci 0000:45:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.697210] pci 0000:45:06.0: MMC cards are now supported by standard SDHCI controller
[ 0.697224] pci 0000:45:06.0: reg 0x10: [mem 0xd3101000-0xd31017ff]
[ 0.697310] pci 0000:45:06.0: supports D1 D2
[ 0.697312] pci 0000:45:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.697360] pci 0000:45:06.1: [1180:0822] type 00 class 0x080500
[ 0.697379] pci 0000:45:06.1: reg 0x10: [mem 0xd3103000-0xd31030ff]
[ 0.697464] pci 0000:45:06.1: supports D1 D2
[ 0.697465] pci 0000:45:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.697511] pci 0000:45:06.2: [1180:0476] type 02 class 0x060700
[ 0.697531] pci 0000:45:06.2: reg 0x10: [mem 0xd3100000-0xd3100fff]
[ 0.697563] pci 0000:45:06.2: supports D1 D2
[ 0.697564] pci 0000:45:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.697637] pci 0000:00:1e.0: PCI bridge to [bus 45-46] (subtractive decode)
[ 0.697641] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.697645] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.697652] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.697654] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.697655] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.697657] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.697658] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
[ 0.697660] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.697704] pci_bus 0000:46: busn_res: can not insert [bus 46-ff] under [bus 45-46] (conflicts with (null) [bus 45-46])
[ 0.697708] pci_bus 0000:46: busn_res: [bus 46-ff] end is updated to 49
[ 0.697710] pci_bus 0000:46: busn_res: can not insert [bus 46-49] under [bus 45-46] (conflicts with (null) [bus 45-46])
[ 0.697714] pci_bus 0000:46: [bus 46-49] partially hidden behind transparent bridge 0000:45 [bus 45-46]
[ 0.697717] pci 0000:00:1e.0: bridge has subordinate 46 but max busn 49
[ 0.697754] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.698611] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.698656] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.698699] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.698744] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.698788] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.698832] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.698875] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.698917] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.698957] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.698961] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.698964] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.699026] PCI host bridge to bus 0000:ff
[ 0.699028] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.699033] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.699076] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.699119] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.699156] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.699192] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.699229] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.699565] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.699603] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.699719] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.699722] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.699724] vgaarb: loaded
[ 0.699726] vgaarb: bridge control possible 0000:01:00.0
[ 0.699811] SCSI subsystem initialized
[ 0.699872] libata version 3.00 loaded.
[ 0.699902] ACPI: bus type USB registered
[ 0.699923] usbcore: registered new interface driver usbfs
[ 0.699931] usbcore: registered new interface driver hub
[ 0.699951] usbcore: registered new device driver usb
[ 0.700028] PCI: Using ACPI for IRQ routing
[ 0.709747] PCI: pci_cache_line_size set to 64 bytes
[ 0.709816] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.709818] e820: reserve RAM buffer [mem 0xbefc2000-0xbfffffff]
[ 0.709819] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.709930] NetLabel: Initializing
[ 0.709931] NetLabel: domain hash size = 128
[ 0.709932] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.709944] NetLabel: unlabeled traffic allowed by default
[ 0.710011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.710016] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.712054] Switched to clocksource hpet
[ 0.718224] pnp: PnP ACPI init
[ 0.718516] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.718519] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.718521] system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.718523] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.718524] system 00:00: [mem 0xd7500000-0xd7500fff] has been reserved
[ 0.718526] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.718528] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.718529] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.718531] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.718535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718656] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.718727] system 00:02: [io 0x0200-0x027f] has been reserved
[ 0.718730] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.718731] system 00:02: [io 0xffff] has been reserved
[ 0.718733] system 00:02: [io 0xffff] has been reserved
[ 0.718735] system 00:02: [io 0x0400-0x047f] could not be reserved
[ 0.718736] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.718738] system 00:02: [io 0xef80-0xef9f] has been reserved
[ 0.718740] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718773] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.719114] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.719392] pnp 00:05: [dma 0 disabled]
[ 0.719452] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.719479] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.719506] pnp 00:07: Plug and Play ACPI device, IDs SYN0165 SYN0100 SYN0002 PNP0f13 (active)
[ 0.719867] pnp: PnP ACPI: found 8 devices
[ 0.726611] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.726639] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
[ 0.726666] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.726674] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7600000-0xd77fffff 64bit pref]
[ 0.726677] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.726679] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.726681] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.726684] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.726686] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.726689] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.726695] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
[ 0.726704] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[ 0.726707] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.726713] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
[ 0.726717] pci 0000:00:1c.1: bridge window [mem 0xd7600000-0xd77fffff 64bit pref]
[ 0.726724] pci 0000:00:1c.3: PCI bridge to [bus 44]
[ 0.726730] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.726741] pci 0000:45:06.2: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.726743] pci 0000:45:06.2: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.726744] pci 0000:45:06.2: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.726746] pci 0000:45:06.2: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.726749] pci 0000:45:06.2: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[ 0.726751] pci 0000:45:06.2: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
[ 0.726753] pci 0000:45:06.2: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.726754] pci 0000:45:06.2: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.726756] pci 0000:45:06.2: CardBus bridge to [bus 46-49]
[ 0.726758] pci 0000:45:06.2: bridge window [io 0x2000-0x20ff]
[ 0.726762] pci 0000:45:06.2: bridge window [io 0x2400-0x24ff]
[ 0.726767] pci 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.726771] pci 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.726776] pci 0000:00:1e.0: PCI bridge to [bus 45-46]
[ 0.726779] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.726784] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.726795] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.726796] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.726798] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.726799] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.726801] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.726802] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.726804] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.726805] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.726807] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.726809] pci_bus 0000:02: resource 1 [mem 0xd7300000-0xd73fffff]
[ 0.726810] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
[ 0.726812] pci_bus 0000:03: resource 1 [mem 0xd3300000-0xd72fffff]
[ 0.726813] pci_bus 0000:03: resource 2 [mem 0xd7600000-0xd77fffff 64bit pref]
[ 0.726815] pci_bus 0000:44: resource 1 [mem 0xd3200000-0xd32fffff]
[ 0.726817] pci_bus 0000:45: resource 0 [io 0x2000-0x2fff]
[ 0.726818] pci_bus 0000:45: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.726820] pci_bus 0000:45: resource 4 [io 0x0000-0x0cf7]
[ 0.726821] pci_bus 0000:45: resource 5 [io 0x0d00-0xffff]
[ 0.726822] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.726824] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.726825] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.726827] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.726828] pci_bus 0000:46: resource 0 [io 0x2000-0x20ff]
[ 0.726830] pci_bus 0000:46: resource 1 [io 0x2400-0x24ff]
[ 0.726831] pci_bus 0000:46: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 0.726833] pci_bus 0000:46: resource 3 [mem 0xdc000000-0xdfffffff]
[ 0.726866] NET: Registered protocol family 2
[ 0.727105] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.727273] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.727460] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.727491] TCP: reno registered
[ 0.727503] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.727536] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.727621] NET: Registered protocol family 1
[ 0.728300] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.728329] PCI: CLS 64 bytes, default 64
[ 0.728393] Unpacking initramfs...
[ 0.977662] Freeing initrd memory: 18492K (ffff880035bd3000 - ffff880036de2000)
[ 0.977695] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.977699] software IO TLB [mem 0xbafc2000-0xbefc2000] (64MB) mapped at [ffff8800bafc2000-ffff8800befc1fff]
[ 0.977992] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[ 0.977998] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[ 0.978004] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[ 0.978011] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[ 0.978094] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.978496] SSE version of gcm_enc/dec engaged.
[ 0.980805] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.981386] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.981417] Initialise system trusted keyring
[ 0.981437] audit: initializing netlink subsys (disabled)
[ 0.981460] audit: type=2000 audit(1414586534.852:1): initialized
[ 0.981789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.983099] zpool: loaded
[ 0.983261] VFS: Disk quotas dquot_6.5.2
[ 0.983297] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.983622] msgmni has been set to 15674
[ 0.983680] Key type big_key registered
[ 0.983683] SELinux: Registering netfilter hooks
[ 0.984757] alg: No test for stdrng (krng)
[ 0.984767] NET: Registered protocol family 38
[ 0.984773] Key type asymmetric registered
[ 0.984775] Asymmetric key parser 'x509' registered
[ 0.984812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.984868] io scheduler noop registered
[ 0.984871] io scheduler deadline registered
[ 0.984903] io scheduler cfq registered (default)
[ 0.985214] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.985421] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.985645] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.985878] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.985980] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.985982] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.985984] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.985986] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.986006] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.986010] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.986029] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.986033] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.986051] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.986052] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
[ 0.986057] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.986071] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.986133] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.986164] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.986168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.986214] intel_idle: MWAIT substates: 0x1120
[ 0.986215] intel_idle: v0.4 model 0x25
[ 0.986216] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.986541] ACPI: AC Adapter [AC] (on-line)
[ 0.986727] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.986731] ACPI: Sleep Button [SLPB]
[ 0.986766] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.986786] ACPI: Lid Switch [LID]
[ 0.986820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.986822] ACPI: Power Button [PWRF]
[ 0.998114] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.998119] ACPI: Thermal Zone [EXTZ] (27 C)
[ 1.002245] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.002249] ACPI: Thermal Zone [EX2Z] (22 C)
[ 1.004432] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.004436] ACPI: Thermal Zone [PWMZ] (11 C)
[ 1.008538] thermal LNXTHERM:03: registered as thermal_zone3
[ 1.008542] ACPI: Thermal Zone [LOCZ] (21 C)
[ 1.009614] thermal LNXTHERM:04: registered as thermal_zone4
[ 1.009618] ACPI: Thermal Zone [GFXZ] (0 C)
[ 1.025903] thermal LNXTHERM:05: registered as thermal_zone5
[ 1.025905] ACPI: Thermal Zone [BATZ] (22 C)
[ 1.040551] thermal LNXTHERM:06: registered as thermal_zone6
[ 1.040553] ACPI: Thermal Zone [EGXZ] (31 C)
[ 1.040754] thermal LNXTHERM:07: registered as thermal_zone7
[ 1.040756] ACPI: Thermal Zone [CPUZ] (33 C)
[ 1.040916] thermal LNXTHERM:08: registered as thermal_zone8
[ 1.040917] ACPI: Thermal Zone [MCHZ] (30 C)
[ 1.041073] thermal LNXTHERM:09: registered as thermal_zone9
[ 1.041074] ACPI: Thermal Zone [PCHZ] (59 C)
[ 1.041130] GHES: HEST is not enabled!
[ 1.041318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.062272] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.084044] 0000:00:16.3: ttyS1 at I/O 0x6080 (irq = 17, base_baud = 115200) is a 16550A
[ 1.084981] Non-volatile memory driver v1.3
[ 1.084991] Linux agpgart interface v0.103
[ 1.085262] ata_piix 0000:00:1f.2: version 2.13
[ 1.085400] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.099375] ACPI: Battery Slot [BAT0] (battery present)
[ 1.099423] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.237204] scsi host0: ata_piix
[ 1.237688] scsi host1: ata_piix
[ 1.237778] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x6050 irq 14
[ 1.237787] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x6058 irq 15
[ 1.238011] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.238365] scsi host2: ata_piix
[ 1.238763] scsi host3: ata_piix
[ 1.238854] ata3: SATA max UDMA/133 cmd 0x6068 ctl 0x608c bmdma 0x6030 irq 21
[ 1.238861] ata4: SATA max UDMA/133 cmd 0x6060 ctl 0x6088 bmdma 0x6038 irq 21
[ 1.238958] libphy: Fixed MDIO Bus: probed
[ 1.239033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.239038] ehci-pci: EHCI PCI platform driver
[ 1.239251] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.239307] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.239323] ehci-pci 0000:00:1a.0: debug port 2
[ 1.243257] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.243276] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd7428000
[ 1.249403] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.249486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.249490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.249493] usb usb1: Product: EHCI Host Controller
[ 1.249496] usb usb1: Manufacturer: Linux 3.17.1-304.fc21.x86_64 ehci_hcd
[ 1.249499] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.249783] hub 1-0:1.0: USB hub found
[ 1.249797] hub 1-0:1.0: 3 ports detected
[ 1.250415] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.250575] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.250596] ehci-pci 0000:00:1d.0: debug port 2
[ 1.254569] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.254600] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd7427000
[ 1.260238] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.260311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.260316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260319] usb usb2: Product: EHCI Host Controller
[ 1.260322] usb usb2: Manufacturer: Linux 3.17.1-304.fc21.x86_64 ehci_hcd
[ 1.260324] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.260641] hub 2-0:1.0: USB hub found
[ 1.260654] hub 2-0:1.0: 3 ports detected
[ 1.260894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.260904] ohci-pci: OHCI PCI platform driver
[ 1.260925] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.261014] usbcore: registered new interface driver usbserial
[ 1.261026] usbcore: registered new interface driver usbserial_generic
[ 1.261037] usbserial: USB Serial support registered for generic
[ 1.261093] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.262889] i8042: Detected active multiplexing controller, rev 1.1
[ 1.263588] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.263596] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.263646] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.263690] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.263734] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.264037] mousedev: PS/2 mouse device common for all mice
[ 1.264791] rtc_cmos 00:03: RTC can wake from S4
[ 1.265060] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.265102] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.265284] device-mapper: uevent: version 1.0.3
[ 1.265505] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.265788] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.265876] usbcore: registered new interface driver usbhid
[ 1.265877] usbhid: USB HID core driver
[ 1.265915] drop_monitor: Initializing network drop monitor service
[ 1.265985] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.266133] TCP: cubic registered
[ 1.266139] Initializing XFRM netlink socket
[ 1.266233] NET: Registered protocol family 10
[ 1.266523] mip6: Mobile IPv6
[ 1.266530] NET: Registered protocol family 17
[ 1.267501] Loading compiled-in X.509 certificates
[ 1.269721] Loaded X.509 cert 'Fedora kernel signing key: eb5eacdffcb83d1ca3e7dae0d998615af3153660'
[ 1.269751] registered taskstats version 1
[ 1.270658] Magic number: 2:162:735
[ 1.270845] rtc_cmos 00:03: setting system clock to 2014-10-29 12:42:16 UTC (1414586536)
[ 1.270987] PM: Hibernation image not present or could not be loaded.
[ 1.289237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.551173] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.557742] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.569403] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.665817] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.665822] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.666299] hub 1-1:1.0: USB hub found
[ 1.666428] hub 1-1:1.0: 6 ports detected
[ 1.770272] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.884851] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.884857] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.885309] hub 2-1:1.0: USB hub found
[ 1.885565] hub 2-1:1.0: 8 ports detected
[ 1.960493] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.979269] tsc: Refined TSC clocksource calibration: 2659.999 MHz
[ 1.998349] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.998369] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.018242] ata1.00: ATA-8: KINGSTON SV300S37A120G, 541ABBF0, max UDMA/133
[ 2.018248] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 2.038098] ata1.00: configured for UDMA/133
[ 2.038433] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 2.039035] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.039081] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.039248] sd 0:0:0:0: [sda] Write Protect is off
[ 2.039256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.039377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.039917] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=231d
[ 2.039922] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.039926] usb 1-1.1: Product: HP Integrated Module
[ 2.039929] usb 1-1.1: Manufacturer: Broadcom Corp
[ 2.040417] sda: sda1 sda2
[ 2.040950] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.113504] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 2.190395] usb 1-1.3: New USB device found, idVendor=138a, idProduct=0007
[ 2.190401] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.190405] usb 1-1.3: SerialNumber: 002040620189
[ 2.264515] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.282191] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 2.350050] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
[ 2.350055] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.350592] hub 1-1.4:1.0: USB hub found
[ 2.350733] hub 1-1.4:1.0: 4 ports detected
[ 2.425520] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
[ 2.549294] ata2.01: failed to resume link (SControl 0)
[ 2.550309] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b15e
[ 2.550314] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.550317] usb 1-1.5: Product: HP Webcam [2 MP Macro]
[ 2.550319] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.626540] usb 2-1.4: new low-speed USB device number 3 using ehci-pci
[ 2.700433] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.700459] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.700477] ata2.01: link offline, clearing class 3 to NONE
[ 2.707671] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c51b
[ 2.707676] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.707680] usb 2-1.4: Product: USB Receiver
[ 2.707682] usb 2-1.4: Manufacturer: Logitech
[ 2.713673] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C51B.0001/input/input12
[ 2.713886] hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0
[ 2.716569] hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1
[ 2.719567] ata2.00: ATAPI: hp DVD RW AD-7586H, KH04, max UDMA/100
[ 2.741605] ata2.00: configured for UDMA/100
[ 2.748295] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7586H KH04 PQ: 0 ANSI: 5
[ 2.783393] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.783398] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.783671] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.783820] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.786477] Freeing unused kernel memory: 1468K (ffffffff81d35000 - ffffffff81ea4000)
[ 2.786481] Write protecting the kernel read-only data: 12288k
[ 2.790168] Freeing unused kernel memory: 716K (ffff88000174d000 - ffff880001800000)
[ 2.794078] Freeing unused kernel memory: 844K (ffff880001b2d000 - ffff880001c00000)
[ 2.797513] random: systemd urandom read with 28 bits of entropy available
[ 2.979408] Switched to clocksource tsc
[ 3.078573] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 3.093557] acpi device:03: registered as cooling_device4
[ 3.093645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input13
[ 3.095332] wmi: Mapper loaded
[ 3.101669] pps_core: LinuxPPS API ver. 1 registered
[ 3.101672] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.103595] PTP clock support registered
[ 3.119780] yenta_cardbus 0000:45:06.2: CardBus bridge found [103c:172b]
[ 3.126997] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.127002] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.127632] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.127662] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 3.133114] [drm] Initialized drm 1.1.0 20060810
[ 3.165665] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 598102
[ 3.219614] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 3.241328] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8600b1
[ 3.241333] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 3.241335] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 3.241375] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.242520] yenta_cardbus 0000:45:06.2: ISA IRQ mask 0x0cb8, PCI irq 22
[ 3.242525] yenta_cardbus 0000:45:06.2: Socket status: 30000810
[ 3.242528] pci_bus 0000:45: Raising subordinate bus# of parent bus (#45) from #46 to #49
[ 3.242538] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 3.242541] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [mem 0xd3100000-0xd31fffff]
[ 3.242544] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3100000-0xd31fffff:
[ 3.242552] excluding 0xd3100000-0xd310ffff
[ 3.245923] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 3.245932] excluding 0xc0000-0xfffff
[ 3.245960] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 3.245965] excluding 0xa0000000-0xa0ffffff
[ 3.245993] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 3.245999] excluding 0x60000000-0x60ffffff
[ 3.294362] firewire_ohci 0000:45:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 3.295528] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:b5:99:f0:d7:67
[ 3.295531] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.295632] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
[ 3.296562] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 3.317098] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.317104] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 3.317331] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.317336] nouveau [ VBIOS][0000:01:00.0] version 70.18.49.01.0c
[ 3.318182] nouveau 0000:01:00.0: irq 29 for MSI/MSI-X
[ 3.318197] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 3.318241] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 3.318244] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 3.318248] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 3.322090] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 3.350175] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.350192] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 3.350197] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.350251] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 3.350258] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 3.350264] nouveau [ CLK][0000:01:00.0] 0f: core 606 MHz shader 1468 MHz memory 790 MHz
[ 3.350294] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 3.350710] [TTM] Zone kernel: Available graphics memory: 4014244 kiB
[ 3.350714] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.350716] [TTM] Initializing pool allocator
[ 3.350726] [TTM] Initializing DMA pool allocator
[ 3.350748] nouveau [ DRM] VRAM: 512 MiB
[ 3.350751] nouveau [ DRM] GART: 1048576 MiB
[ 3.350758] nouveau [ DRM] TMDS table version 2.0
[ 3.350761] nouveau [ DRM] DCB version 4.0
[ 3.350765] nouveau [ DRM] DCB outp 00: 048003b6 0f200014
[ 3.350769] nouveau [ DRM] DCB outp 01: 02011300 00000000
[ 3.350773] nouveau [ DRM] DCB outp 02: 028223a6 0f220010
[ 3.350776] nouveau [ DRM] DCB outp 03: 02022362 00020010
[ 3.350779] nouveau [ DRM] DCB outp 04: 088333c6 0f220010
[ 3.350782] nouveau [ DRM] DCB outp 05: 08033382 00020010
[ 3.350785] nouveau [ DRM] DCB conn 00: 00002047
[ 3.350789] nouveau [ DRM] DCB conn 01: 00000100
[ 3.350792] nouveau [ DRM] DCB conn 02: 00101246
[ 3.350795] nouveau [ DRM] DCB conn 03: 00210346
[ 3.392297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.392299] [drm] Driver supports precise vblank timestamp query.
[ 3.425266] nouveau [ DRM] MM: using COPY for buffer copies
[ 3.709309] nouveau [ DRM] allocated 1366x768 fb: 0x70000, bo ffff88022d990400
[ 3.709471] fbcon: nouveaufb (fb0) is primary device
[ 3.795422] firewire_core 0000:45:06.0: created device fw0: GUID 5566778811223344, S400
[ 3.990794] Console: switching to colour frame buffer device 170x48
[ 3.992417] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 3.992419] nouveau 0000:01:00.0: registered panic notifier
[ 3.995550] [drm] Initialized nouveau 1.2.0 20120801 for 0000:01:00.0 on minor 0
[ 4.117579] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 4.117586] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3110000-0xd31fffff:
[ 4.125569] excluding 0xd31fe000-0xd320bfff
[ 4.125774] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
[ 4.171733] scsi host4: pata_pcmcia
[ 4.171868] ata5: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
[ 4.341706] PM: Starting manual resume from disk
[ 4.341713] PM: Hibernation image partition 253:1 present
[ 4.341714] PM: Looking for hibernation image.
[ 4.343453] PM: Image not found (code -22)
[ 4.343457] PM: Hibernation image not present or could not be loaded.
[ 4.364746] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.685892] systemd-journald[149]: Received SIGTERM from PID 1 (systemd).
[ 4.686178] random: nonblocking pool is initialized
[ 4.778516] audit: type=1404 audit(1414586540.006:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 4.816172] SELinux: 2048 avtab hash slots, 103119 rules.
[ 4.853845] SELinux: 2048 avtab hash slots, 103119 rules.
[ 4.910092] SELinux: 8 users, 102 roles, 4962 types, 294 bools, 1 sens, 1024 cats
[ 4.910100] SELinux: 83 classes, 103119 rules
[ 4.919395] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 4.919407] SELinux: the above unknown classes and permissions will be allowed
[ 4.919419] SELinux: Completing initialization.
[ 4.919420] SELinux: Setting up existing superblocks.
[ 4.919432] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.919449] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.919459] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.919579] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.919615] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 4.920691] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.922015] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.922023] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.922032] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.922037] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 4.922042] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.922075] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 4.922090] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.922107] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.922125] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.922712] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 4.922717] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.922728] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.922878] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.922938] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922947] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 4.922951] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922954] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922958] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922970] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922976] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922979] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922983] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922993] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922996] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.923002] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 4.923006] SELinux: initialized (dev drm, type drm), not configured for labeling
[ 4.923019] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 4.931178] audit: type=1403 audit(1414586540.158:3): policy loaded auid=4294967295 ses=4294967295
[ 4.939447] systemd[1]: Successfully loaded SELinux policy in 164.916ms.
[ 4.998508] systemd[1]: Relabelled /dev and /run in 38.279ms.
[ 5.228824] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 5.247239] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.247487] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.304747] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.551759] hp_accel: hardware type HPB64xx found
[ 5.552354] lis3lv02d: 8 bits sensor found
[ 5.578096] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[ 5.578105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578110] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 5.578114] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578115] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 5.578119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578120] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 5.578124] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578125] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.593281] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.603777] mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
[ 5.606439] parport_pc 00:05: reported by Plug and Play ACPI
[ 5.606555] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 5.606595] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[ 5.654908] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 5.655234] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 5.660021] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 5.660627] sdhci: Secure Digital Host Controller Interface driver
[ 5.660629] sdhci: Copyright(c) Pierre Ossman
[ 5.661139] cfg80211: Calling CRDA to update world regulatory domain
[ 5.664015] sdhci-pci 0000:45:06.1: SDHCI controller found [1180:0822] (rev 25)
[ 5.665160] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.665173] sdhci-pci 0000:45:06.1: No vmmc regulator found
[ 5.665175] sdhci-pci 0000:45:06.1: No vqmmc regulator found
[ 5.666182] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.668178] mmc0: SDHCI controller on PCI [0000:45:06.1] using DMA
[ 5.674347] WARNING! power/level is deprecated; use power/control instead
[ 5.695554] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 5.696639] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.696650] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.719539] Bluetooth: Core ver 2.19
[ 5.719575] NET: Registered protocol family 31
[ 5.719577] Bluetooth: HCI device and connection manager initialized
[ 5.719587] Bluetooth: HCI socket layer initialized
[ 5.719590] Bluetooth: L2CAP socket layer initialized
[ 5.719598] Bluetooth: SCO socket layer initialized
[ 5.719950] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 5.719960] excluding 0xc0000-0xfffff
[ 5.720005] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 5.720012] excluding 0xa0000000-0xa0ffffff
[ 5.720059] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 5.720067] excluding 0x60000000-0x60ffffff
[ 5.723524] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 5.723528] Copyright(c) 2003- 2014 Intel Corporation
[ 5.724642] iwlwifi 0000:44:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.724723] iwlwifi 0000:44:00.0: irq 32 for MSI/MSI-X
[ 5.728315] iwlwifi 0000:44:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 5.728336] iwlwifi 0000:44:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 5.734139] iwlwifi 0000:44:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 5.740568] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 5.740574] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.740576] sound hdaudioC0D0: hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[ 5.740578] sound hdaudioC0D0: mono: mono_out=0x0
[ 5.740580] sound hdaudioC0D0: inputs:
[ 5.740583] sound hdaudioC0D0: Internal Mic=0xc
[ 5.740585] sound hdaudioC0D0: Mic=0xb
[ 5.740587] sound hdaudioC0D0: Line=0xe
[ 5.768320] usbcore: registered new interface driver btusb
[ 5.770519] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.770740] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.770847] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.770952] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.786826] media: Linux media interface: v0.10
[ 5.810121] Linux video capture interface: v2.00
[ 5.817159] iwlwifi 0000:44:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 5.817163] iwlwifi 0000:44:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 5.817165] iwlwifi 0000:44:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 5.817167] iwlwifi 0000:44:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 5.817228] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 5.846820] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.858474] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b15e)
[ 5.865895] iTCO_vendor_support: vendor-support=0
[ 5.867994] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.868039] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[ 5.868296] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.870104] ppdev: user-space parallel port driver
[ 5.897532] input: HP Webcam [2 MP Macro] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input20
[ 5.898593] usbcore: registered new interface driver uvcvideo
[ 5.898597] USB Video Class driver (1.1.1)
[ 5.905051] iwlwifi 0000:44:00.0 wlo1: renamed from wlan0
[ 5.915310] alg: No test for crc32 (crc32-pclmul)
[ 5.945194] cfg80211: World regulatory domain updated:
[ 5.945198] cfg80211: DFS Master region: unset
[ 5.945200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.945203] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945205] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945207] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945208] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945211] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 5.945213] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 5.945215] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945217] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 5.961213] cfg80211: Calling CRDA for country: US
[ 5.979697] cfg80211: Regulatory domain changed to country: US
[ 5.979702] cfg80211: DFS Master region: FCC
[ 5.979703] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.979707] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 5.979709] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 5.979711] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 5.979713] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 5.979715] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6.021211] kvm: disabled by bios
[ 6.026817] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 6.026952] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 6.027073] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[ 6.027187] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[ 6.039686] Adding 8126460k swap on /dev/mapper/fedora_patuxant-swap. Priority:-1 extents:1 across:8126460k SSFS
[ 6.050184] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 6.085330] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.085529] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 6.088641] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.088653] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 6.154815] audit: type=1305 audit(1414586541.382:4): audit_pid=740 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 6.343259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.343263] Bluetooth: BNEP filters: protocol multicast
[ 6.343274] Bluetooth: BNEP socket layer initialized
[ 6.427867] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.696088] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.717706] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.117689] Ebtables v2.0 registered
[ 7.177829] Bridge firewalling registered
[ 7.778869] systemd-journald[528]: Received request to flush runtime journal from PID 1
[ 7.928686] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 8.028827] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 8.028941] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.045026] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 8.045174] iwlwifi 0000:44:00.0: Radio type=0x1-0x3-0x1
[ 8.257414] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 8.257570] iwlwifi 0000:44:00.0: Radio type=0x1-0x3-0x1
[ 8.319415] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 9.224518] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.463082] tun: Universal TUN/TAP device driver, 1.6
[ 9.463086] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 9.506587] device virbr0-nic entered promiscuous mode
[ 9.517144] virbr0: port 1(virbr0-nic) entered forwarding state
[ 9.517157] virbr0: port 1(virbr0-nic) entered forwarding state
[ 9.784988] virbr0: port 1(virbr0-nic) entered disabled state
[ 11.457212] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 12.178021] wlo1: authenticate with 28:c6:8e:82:18:b4
[ 12.198836] wlo1: send auth to 28:c6:8e:82:18:b4 (try 1/3)
[ 12.201555] wlo1: authenticated
[ 12.202237] wlo1: associate with 28:c6:8e:82:18:b4 (try 1/3)
[ 12.206112] wlo1: RX AssocResp from 28:c6:8e:82:18:b4 (capab=0x411 status=0 aid=2)
[ 12.208136] wlo1: associated
[ 12.208174] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 27.207408] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 28.023213] fuse init (API version 7.23)
[ 28.027417] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 28.052386] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 180.879312] wlo1: deauthenticating from 28:c6:8e:82:18:b4 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 180.885726] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 180.890271] cfg80211: Calling CRDA to update world regulatory domain
[ 180.890706] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 180.899825] cfg80211: World regulatory domain updated:
[ 180.899831] cfg80211: DFS Master region: unset
[ 180.899833] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.899836] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899838] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899840] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899842] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899844] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 180.899846] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 180.899848] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899850] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 180.899872] cfg80211: Calling CRDA for country: US
[ 180.937221] cfg80211: Regulatory domain changed to country: US
[ 180.937226] cfg80211: DFS Master region: FCC
[ 180.937227] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.937230] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 180.937232] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 180.937234] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 180.937236] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 180.937238] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 181.900331] PM: Syncing filesystems ... done.
[ 181.982411] PM: Preparing system for mem sleep
[ 182.246130] Freezing user space processes ... (elapsed 0.015 seconds) done.
[ 182.261383] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 182.262331] PM: Entering mem sleep
[ 182.262481] Suspending console(s) (use no_console_suspend to debug)
[ 182.263349] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 182.264362] sd 0:0:0:0: [sda] Stopping disk
[ 182.317979] parport_pc 00:05: disabled
[ 182.318355] serial 00:04: disabled
[ 182.318431] nouveau [ DRM] suspending console...
[ 182.318443] nouveau [ DRM] suspending display...
[ 182.318530] nouveau [ DRM] evicting buffers...
[ 182.318719] e1000e: EEE TX LPI TIMER: 00000000
[ 183.179658] nouveau [ DRM] waiting for kernel channels to go idle...
[ 183.179683] nouveau [ DRM] suspending client object trees...
[ 183.180287] nouveau [ DRM] suspending kernel object tree...
[ 185.302704] PM: suspend of devices complete after 3039.734 msecs
[ 185.303545] PM: late suspend of devices complete after 0.836 msecs
[ 185.304101] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 185.304224] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 185.304230] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 185.314543] PM: noirq suspend of devices complete after 10.996 msecs
[ 185.314832] ACPI: Preparing to enter system sleep state S3
[ 185.319343] PM: Saving platform NVS memory
[ 185.320039] Disabling non-boot CPUs ...
[ 185.321667] smpboot: CPU 1 is now offline
[ 185.323577] smpboot: CPU 2 is now offline
[ 185.325321] smpboot: CPU 3 is now offline
[ 185.326628] ACPI: Low-level resume complete
[ 185.326675] PM: Restoring platform NVS memory
[ 185.327308] Enabling non-boot CPUs ...
[ 185.327360] x86: Booting SMP configuration:
[ 185.327361] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 185.337770] CPU1 microcode updated early to revision 0x4, date = 2013-06-28
[ 185.341015] CPU1 is up
[ 185.341038] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 185.351423] CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 185.354652] CPU2 is up
[ 185.354676] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 185.368348] CPU3 is up
[ 185.370699] ACPI: Waking up from system sleep state S3
[ 185.408010] acpi LNXPOWER:02: Turning OFF
[ 185.408047] acpi LNXPOWER:01: Turning OFF
[ 185.408657] yenta_cardbus 0000:45:06.2: enabling device (0006 -> 0007)
[ 185.418947] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 185.418958] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 185.419098] firewire_ohci 0000:45:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 185.419099] firewire_ohci 0000:45:06.0: MMC cards are now supported by standard SDHCI controller
[ 185.428879] PM: noirq resume of devices complete after 20.798 msecs
[ 185.429288] PM: early resume of devices complete after 0.367 msecs
[ 185.429377] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[ 185.429389] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 185.432587] nouveau [ DRM] re-enabling device...
[ 185.432597] nouveau [ DRM] resuming kernel object tree...
[ 185.432618] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 185.432619] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 185.433672] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 185.437501] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 185.439892] sd 0:0:0:0: [sda] Starting disk
[ 185.472546] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 185.473344] serial 00:04: activated
[ 185.474211] parport_pc 00:05: activated
[ 185.513438] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 185.643988] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[ 185.741766] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 185.741771] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 185.741814] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 185.743183] nouveau [ DRM] resuming client object trees...
[ 185.743710] nouveau [ DRM] resuming display...
[ 185.748919] nouveau E[ PDISP][0000:01:00.0] 00:0006:0344: link training failed
[ 185.754605] ata3: SATA link down (SStatus 0 SControl 300)
[ 185.755020] nouveau E[ PDISP][0000:01:00.0] 00:0006:0344: link training failed
[ 185.756025] nouveau E[ PDISP][0000:01:00.0] 00:0006:0344: link not trained before attach
[ 185.766599] ata4: SATA link down (SStatus 0 SControl 300)
[ 185.855005] usb 1-1.5: reset high-speed USB device number 6 using ehci-pci
[ 186.006305] nouveau [ DRM] resuming console...
[ 186.022871] firewire_core 0000:45:06.0: rediscovered device fw0
[ 186.145779] PM: resume of devices complete after 716.438 msecs
[ 186.146572] PM: Finishing wakeup.
[ 186.146574] Restarting tasks ...
[ 186.146973] yenta_cardbus 0000:45:06.2: CardBus bridge to [bus 46-49]
[ 186.146978] yenta_cardbus 0000:45:06.2: bridge window [io 0x2000-0x20ff]
[ 186.146984] yenta_cardbus 0000:45:06.2: bridge window [io 0x2400-0x24ff]
[ 186.146990] yenta_cardbus 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 186.146995] yenta_cardbus 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 186.154386] done.
[ 186.158626] yenta_cardbus 0000:45:06.2: CardBus bridge to [bus 46-49]
[ 186.158631] yenta_cardbus 0000:45:06.2: bridge window [io 0x2000-0x20ff]
[ 186.158638] yenta_cardbus 0000:45:06.2: bridge window [io 0x2400-0x24ff]
[ 186.158644] yenta_cardbus 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 186.158649] yenta_cardbus 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 186.205918] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 186.205939] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 186.209175] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 186.209180] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out
[ 186.229717] ata1.00: configured for UDMA/133
[ 186.237956] video LNXVIDEO:00: Restoring backlight state
[ 186.588643] e1000e: enp0s25 NIC Link is Down
[ 186.603108] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 186.707701] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 186.754891] ata2.01: failed to resume link (SControl 0)
[ 186.807928] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 186.808063] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 186.822817] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 186.822964] iwlwifi 0000:44:00.0: Radio type=0x1-0x3-0x1
[ 186.893917] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 186.905967] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 186.905990] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 186.906007] ata2.01: link offline, clearing class 3 to NONE
[ 186.925104] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 186.925110] ata2.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out
[ 186.947254] ata2.00: configured for UDMA/100
[ 190.317831] wlo1: authenticate with 28:c6:8e:82:18:b4
[ 190.320659] wlo1: send auth to 28:c6:8e:82:18:b4 (try 1/3)
[ 190.323416] wlo1: authenticated
[ 190.324107] wlo1: associate with 28:c6:8e:82:18:b4 (try 1/3)
[ 190.327951] wlo1: RX AssocResp from 28:c6:8e:82:18:b4 (capab=0x411 status=0 aid=2)
[ 190.330327] wlo1: associated
[ 190.330362] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2014-10-29 13:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-25 14:25 linux kernel 3.17, freeze on resume John Mountcastle
[not found] ` <1414247146.47116.YahooMailNeo-g4EYUPmW088Me+d1jY/0H5EhsgyP+Z75VpNB7YpNyf8@public.gmane.org>
2014-10-26 1:24 ` Ilia Mirkin
[not found] ` <CAKb7UvhprANm0zP5X1o6nZL=rt1m2iubx0HRq_9_dhc-91sh9A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-29 12:28 ` John H. Mountcastle
2014-10-29 13:07 ` John H. Mountcastle [this message]
2014-11-01 18:15 ` John H. Mountcastle
[not found] ` <5455235F.4090109-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
2014-11-01 18:56 ` Ilia Mirkin
[not found] ` <CAKb7UvhBZ2hm7CxmTqx5-LFO7fPEb40R_DFS7NmY9iPy1M6s0w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-02 4:58 ` Peter Hurley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5450E68A.1030704@yahoo.com \
--to=mtcstle-/e1597as9lqavxtiumwx3w@public.gmane.org \
--cc=imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.