From: Hartmut Knaack <knaack.h@gmx.de>
To: Daniel Baluta <daniel.baluta@intel.com>,
jic23@kernel.org, linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, irina.tirdea@intel.com
Subject: Re: [PATCH v3 2/7] iio: core: Introduce IIO_ACTIVITY channel
Date: Fri, 31 Oct 2014 22:52:51 +0100 [thread overview]
Message-ID: <545404B3.7000304@gmx.de> (raw)
In-Reply-To: <1414491571-11672-3-git-send-email-daniel.baluta@intel.com>
Just some typos left, maybe Jonathan can take care of them, if there are no issues for having a V4.
Daniel Baluta schrieb am 28.10.2014 11:19:
> This channel will be used for exposing information about
> activity composite sensors. Activities supported so far:
> * running
> * jogging
> * walking
> * still
>
> THRESHOLD event is used to signal a change in the activity
> state.
>
> We associate a confidence interval for each activity expressed
> as a percentage from 0 to 100.
> * 0, means the sensor IS NOT reporting that activity.
> * 100, means the sensor IS reporting that activity.
>
> Users of this interface have two possibile means to gather
Typo: possible
> information about the ongoing activities.
>
> 1. Event based, via event file descriptor
> * sensor may report an event when ENTERING an activity or LEAVING
> an activity based on a threshold value.
> * drivers will wake up applications waiting data on the event fd
>
> 2. Polling, by reading the sysfs associated attribute files:
> * /sys/bus/iio/devices/iio:device0/in_activity_running_input
> expressed as percentage confidence value from 0 to 100.
>
> This will offer an interface for Android significant motion
> composite sensor defined here:
> http://source.android.com/devices/sensors/composite_sensors.html
>
> Activities listed above are supported by Freescale's MMA9553 sensor:
> http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
>
> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
> ---
> Documentation/ABI/testing/sysfs-bus-iio | 44 +++++++++++++++++++++++++++++++++
> drivers/iio/industrialio-core.c | 5 ++++
> include/linux/iio/types.h | 7 +++++-
> 3 files changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 5a7fc66..c3a1fd3 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -783,6 +783,40 @@ Description:
> met before an event is generated. If direction is not
> specified then this period applies to both directions.
>
> +What: /sys/.../events/in_activity_still_thresh_rising_en
> +What: /sys/.../events/in_activity_still_thresh_falling_en
> +What: /sys/.../events/in_activity_walking_thresh_rising_en
> +What: /sys/.../events/in_activity_walking_thresh_falling_en
> +What: /sys/.../events/in_activity_jogging_thresh_rising_en
> +What: /sys/.../events/in_activity_jogging_thresh_falling_en
> +What: /sys/.../events/in_activity_running_thresh_rising_en
> +What: /sys/.../events/in_activity_running_thresh_falling_en
> +KernelVersion: 3.19
> +Contact: linux-iio@vger.kernel.org
> +Description:
> + Enables or disables activitity events. Depending on direction
> + an event is generated when sensor ENTERS or LEAVES a given state.
> +
> +What: /sys/.../events/in_activity_still_thresh_rising_value
> +What: /sys/.../events/in_activity_still_thresh_falling_value
> +What: /sys/.../events/in_activity_walking_thresh_rising_value
> +What: /sys/.../events/in_activity_walking_thresh_falling_value
> +What: /sys/.../events/in_activity_jogging_thresh_rising_value
> +What: /sys/.../events/in_activity_jogging_thresh_falling_value
> +What: /sys/.../events/in_activity_running_thresh_rising_value
> +What: /sys/.../events/in_activity_running_thresh_falling_value
> +KernelVersion: 3.19
> +Contact: linux-iio@vger.kernel.org
> +Description:
> + Confidence value (in units as percentage) to be used
> + for deciding when an event should be generated. E.g for
> + running: If the confidence value reported by the sensor
> + is greater then in_activity_running_thresh_rising_value
Typo: greater than
> + then the sensor ENTERS running state. Conversely, if the
> + confidence value reported by the sensor is lower than
> + in_activity_running_thresh_falling_value then the sensor
> + is LEAVING running state.
> +
> What: /sys/.../iio:deviceX/events/in_accel_mag_en
> What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en
> What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en
> @@ -949,6 +983,16 @@ Description:
> and the relevant _type attributes to establish the data storage
> format.
>
> +What: /sys/.../iio:deviceX/in_activity_still_input
> +What: /sys/.../iio:deviceX/in_activity_walking_input
> +What: /sys/.../iio:deviceX/in_activity_jogging_input
> +What: /sys/.../iio:deviceX/in_activity_running_input
> +KernelVersion: 3.19
> +Contact: linux-iio@vger.kernel.org
> +Description:
> + This attribute is used to read the confidence for an activity
> + expressed in units as percentage.
> +
> What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
> KernelVersion: 2.6.38
> Contact: linux-iio@vger.kernel.org
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index af3e76d..e453ef9 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -70,6 +70,7 @@ static const char * const iio_chan_type_name_spec[] = {
> [IIO_CCT] = "cct",
> [IIO_PRESSURE] = "pressure",
> [IIO_HUMIDITYRELATIVE] = "humidityrelative",
> + [IIO_ACTIVITY] = "activity",
> };
>
> static const char * const iio_modifier_names[] = {
> @@ -91,6 +92,10 @@ static const char * const iio_modifier_names[] = {
> [IIO_MOD_NORTH_TRUE] = "from_north_true",
> [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
> [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
> + [IIO_MOD_RUNNING] = "running",
> + [IIO_MOD_JOGGING] = "jogging",
> + [IIO_MOD_WALKING] = "walking",
> + [IIO_MOD_STILL] = "still",
> };
>
> /* relies on pairs of these shared then separate */
> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
> index 4a2af8a..b3a241d 100644
> --- a/include/linux/iio/types.h
> +++ b/include/linux/iio/types.h
> @@ -30,6 +30,7 @@ enum iio_chan_type {
> IIO_CCT,
> IIO_PRESSURE,
> IIO_HUMIDITYRELATIVE,
> + IIO_ACTIVITY,
> };
>
> enum iio_modifier {
> @@ -59,7 +60,11 @@ enum iio_modifier {
> IIO_MOD_NORTH_MAGN,
> IIO_MOD_NORTH_TRUE,
> IIO_MOD_NORTH_MAGN_TILT_COMP,
> - IIO_MOD_NORTH_TRUE_TILT_COMP
> + IIO_MOD_NORTH_TRUE_TILT_COMP,
> + IIO_MOD_RUNNING,
> + IIO_MOD_JOGGING,
> + IIO_MOD_WALKING,
> + IIO_MOD_STILL,
> };
>
> enum iio_event_type {
>
next prev parent reply other threads:[~2014-10-31 21:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 10:19 [PATCH v3 0/7] Introduce IIO interface for Android advanced features Daniel Baluta
2014-10-28 10:19 ` [PATCH v3 1/7] iio: dummy: Add virtual registers for dummy device Daniel Baluta
2014-10-28 10:19 ` [PATCH v3 2/7] iio: core: Introduce IIO_ACTIVITY channel Daniel Baluta
2014-10-31 21:52 ` Hartmut Knaack [this message]
2014-10-28 10:19 ` [PATCH v3 3/7] iio: core: Introduce IIO_EV_DIR_NONE Daniel Baluta
2014-10-28 10:19 ` [PATCH v3 4/7] iio: core: Introduce STEPS channel, ENABLE mask and INSTANCE event Daniel Baluta
2014-10-28 10:19 ` [PATCH v3 5/7] iio: core: Introduce IIO_CHAN_INFO_CALIBHEIGHT Daniel Baluta
2014-10-28 10:19 ` [PATCH v3 6/7] iio: dummy: Demonstrate the usage of new channel types Daniel Baluta
2014-10-28 10:19 ` [PATCH v3 7/7] iio: event_monitor: Add support for " Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545404B3.7000304@gmx.de \
--to=knaack.h@gmx.de \
--cc=daniel.baluta@intel.com \
--cc=irina.tirdea@intel.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.