All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@linaro.org>
To: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>,
	xen-devel <xen-devel@lists.xen.org>
Subject: xen/arm: kernel BUG at /local/home/julien/works/linux/drivers/xen/swiotlb-xen.c:102
Date: Wed, 05 Nov 2014 17:32:15 +0000	[thread overview]
Message-ID: <545A5F1F.9030006@linaro.org> (raw)

Hi Stefano,

I've tried your patch series [1] "introduce GNTTABOP_cache_flush"
on midway with non-LPAE (i.e short descriptor) kernel.

While your series should fix the cache flush on this kind of kernel,
I'm still hitting a BUG_ON when I boot a guest (see stack trace [2]).

>From a quick look this is because the dma and physical address don't have
the same size (resp. 64 and 32 bits). Technically xen_bus_to_phys doesn't really
have a meaning on Xen ARM: the address is still a DMA address but we cast it to
a physical address (not sure why?).

It occurs when I use the multi_v7 config (+ XEN) as DOM0. Disabling CONFIG_LPAE
in the config should also do the job.

Regards,

[1] https://lkml.org/lkml/2014/10/27/441

[2] Stack trace:

[   98.092290] dma 0x2b6769000 paddr 0xb6769000
[   98.096475] ------------[ cut here ]------------
[   98.101147] kernel BUG at /local/home/julien/works/linux/drivers/xen/swiotlb-xen.c:102!
[   98.109219] Internal error: Oops - BUG: 0 [#1] SMP ARM
[   98.114427] Modules linked in:
[   98.117554] CPU: 3 PID: 48 Comm: irq/115-highban Not tainted 3.18.0-rc3-00051-g93cf079-dirty #231
[   98.126493] task: db281680 ti: db40e000 task.ti: db40e000
[   98.131965] PC is at xen_unmap_single+0xc4/0xc8
[   98.136563] LR is at xen_unmap_single+0xc4/0xc8
[   98.141162] pc : [<c04d1640>]    lr : [<c04d1640>]    psr: 60000013
[   98.141162] sp : db40fdf0  ip : 00000000  fp : b6769000
[   98.152793] r10: 00000200  r9 : 00000002  r8 : 00000002
[   98.158088] r7 : 00000000  r6 : 002b6769  r5 : 00000002  r4 : b6769000
[   98.164693] r3 : 00000753  r2 : 1af49000  r1 : dbbc73bc  r0 : 00000020
[   98.171282] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[   98.178660] Control: 10c5387d  Table: 39e3c06a  DAC: 00000015
[   98.184475] Process irq/115-highban (pid: 48, stack limit = 0xdb40e250)
[   98.191159] Stack: (0xdb40fdf0 to 0xdb410000)
[   98.195586] fde0:                                     b6769000 00000020 00000000 00000002
[   98.203833] fe00: db40fe00 db0ea210 00000000 d98a1a80 00000001 00000001 00000002 db0ea210
[   98.212079] fe20: 00000000 db3e3410 db3f1790 c04d1880 00000200 00000002 00000000 00000016
[   98.220325] fe40: 0000091e db4100b8 d98a1a80 db410000 00000001 000000b0 00000001 c05cdddc
[   98.228570] fe60: 00000000 c0262f9c db08c01c db281680 db40e010 db4100b8 db410000 db4116c8
[   98.236817] fe80: 00000001 c05ce0b0 00000000 00000000 db410000 c05ce478 db410000 db4116c8
[   98.245068] fea0: 00000000 db410000 e0880100 00000008 00000000 e0880000 00000001 c05e5288
[   98.253309] fec0: c0c8a994 db40fee8 e0804000 c020897c c041c868 60000013 ffffffff 00000000
[   98.261554] fee0: db3f1890 0000001f 00000073 00000001 db3f1890 c02836ac db00f7d4 c05e57d0
[   98.269801] ff00: c05e5788 db3f6340 db00f780 00000000 00000001 db00f780 db3f6340 c02836c8
[   98.278047] ff20: db3f6360 db40e000 00000000 c02839ec c02838b4 db40e030 00000000 c02837f8
[   98.286293] ff40: 00000000 db3f6380 00000000 db3f6340 c02838b4 00000000 00000000 00000000
[   98.294538] ff60: 00000000 c0262358 00000000 00000000 00000000 db3f6340 00000000 00000000
[   98.302785] ff80: db40ff80 db40ff80 00000000 00000000 db40ff90 db40ff90 db40ffac db3f6380
[   98.311031] ffa0: c0262280 00000000 00000000 c020f278 00000000 00000000 00000000 00000000
[   98.319276] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   98.327522] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   98.335780] [<c04d1640>] (xen_unmap_single) from [<c04d1880>] (xen_swiotlb_unmap_sg_attrs+0x48/0x68)
[   98.344974] [<c04d1880>] (xen_swiotlb_unmap_sg_attrs) from [<c05cdddc>] (ata_sg_clean+0x8c/0x120)
[   98.353912] [<c05cdddc>] (ata_sg_clean) from [<c05ce0b0>] (__ata_qc_complete+0x34/0x144)
[   98.362071] [<c05ce0b0>] (__ata_qc_complete) from [<c05ce478>] (ata_qc_complete_multiple+0xa0/0xd4)
[   98.371194] [<c05ce478>] (ata_qc_complete_multiple) from [<c05e5288>] (ahci_port_thread_fn+0x138/0x638)
[   98.380649] [<c05e5288>] (ahci_port_thread_fn) from [<c05e57d0>] (ahci_thread_fn+0x48/0x90)
[   98.389067] [<c05e57d0>] (ahci_thread_fn) from [<c02836c8>] (irq_thread_fn+0x1c/0x40)
[   98.396970] [<c02836c8>] (irq_thread_fn) from [<c02839ec>] (irq_thread+0x138/0x174)
[   98.404693] [<c02839ec>] (irq_thread) from [<c0262358>] (kthread+0xd8/0xf0)
[   98.411723] [<c0262358>] (kthread) from [<c020f278>] (ret_from_fork+0x14/0x3c)
[   98.419011] Code: e1a02004 e1a03005 e34c00ad eb0f9c9a (e7f001f2) 

-- 
Julien Grall

             reply	other threads:[~2014-11-05 17:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-05 17:32 Julien Grall [this message]
2014-11-06 11:46 ` xen/arm: kernel BUG at /local/home/julien/works/linux/drivers/xen/swiotlb-xen.c:102 Stefano Stabellini
2014-11-06 12:25   ` Julien Grall
2014-11-06 12:42     ` Stefano Stabellini
2014-11-06 12:56       ` Julien Grall
2014-11-06 13:01         ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=545A5F1F.9030006@linaro.org \
    --to=julien.grall@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.