From: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
To: Allen Martin <amartin-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Mikko Perttunen <cyndis-/1wQRMveznE@public.gmane.org>
Cc: Mikko Perttunen
<mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: boot regression with AHCI on jetson-tk1
Date: Wed, 05 Nov 2014 13:10:58 -0700 [thread overview]
Message-ID: <545A8452.2050404@wwwdotorg.org> (raw)
In-Reply-To: <20141105053414.GA24124-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
On 11/04/2014 10:34 PM, Allen Martin wrote:
> I tried booting 3.18-rc3 on jetson-tk1 and I'm seeing a hang during
> boot right before user space normally comes up. I bisected the
> regression back to this commit which just turns on AHCI. I don't have
> any SATA device connected to the board.
I just tried this, and everything works out OK for me with 3.18-rc3 or
next-20141016 which I had lying around.
Which board revision are you using? I'm using rev D.
Which U-Boot revision are you using? Perhaps this is an issue with old
U-Boots that don't initialize the full pinmux, now that the kernel
doesn't and hence relies on U-Boot. I tested there weren't any kernel
regressions when I updated it not to program the static pinmux, but
perhaps SATA wasn't enabled when I did that.
next prev parent reply other threads:[~2014-11-05 20:10 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 9:43 [PATCH v6 0/4] Tegra124 soctherm driver Mikko Perttunen
2014-09-26 9:43 ` Mikko Perttunen
[not found] ` <1411724593-4037-1-git-send-email-cyndis-/1wQRMveznE@public.gmane.org>
2014-09-26 9:43 ` [PATCH v6 1/4] of: Add bindings for nvidia,tegra124-soctherm Mikko Perttunen
2014-09-26 9:43 ` Mikko Perttunen
2014-09-26 9:43 ` Mikko Perttunen
2014-09-26 9:43 ` [PATCH v6 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Mikko Perttunen
2014-09-26 9:43 ` Mikko Perttunen
[not found] ` <1411724593-4037-3-git-send-email-cyndis-/1wQRMveznE@public.gmane.org>
2014-11-05 5:34 ` boot regression with AHCI on jetson-tk1 Allen Martin
[not found] ` <20141105053414.GA24124-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-11-05 17:42 ` Mikko Perttunen
[not found] ` <545A6171.6000802-/1wQRMveznE@public.gmane.org>
2014-11-05 19:46 ` Allen Martin
[not found] ` <3cfbab737b604d139e0aabcc33be0a43-wO81nVYWzR7YuxH7O460wFaTQe2KTcn/@public.gmane.org>
2014-11-05 20:08 ` Mikko Perttunen
2014-11-05 20:10 ` Stephen Warren [this message]
[not found] ` <545A8452.2050404-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-11-05 21:08 ` Allen Martin
[not found] ` <f1451de182a0439f96abf8ed9dacd272-wO81nVYWzR7YuxH7O460wFaTQe2KTcn/@public.gmane.org>
2014-11-06 11:27 ` [PATCH] Move reset assertions Mikko Perttunen
2014-09-26 9:43 ` [PATCH v6 3/4] ARM: tegra: Add thermal trip points for Jetson TK1 Mikko Perttunen
2014-09-26 9:43 ` Mikko Perttunen
2014-09-26 9:43 ` [PATCH v6 4/4] thermal: Add Tegra SOCTHERM thermal management driver Mikko Perttunen
2014-09-26 9:43 ` Mikko Perttunen
2014-09-26 11:45 ` Thierry Reding
2014-09-26 11:45 ` Thierry Reding
2014-09-26 20:28 ` Mikko Perttunen
2014-09-26 20:28 ` Mikko Perttunen
2014-09-26 20:28 ` Mikko Perttunen
2014-09-27 12:06 ` Juha-Matti Tilli
2014-09-27 12:06 ` Juha-Matti Tilli
2014-09-27 12:06 ` Juha-Matti Tilli
[not found] ` <20140927120649.GA70809-Xv4IVSKz7SWQi9Q/X01l6/UpdFzICT1y@public.gmane.org>
2014-09-29 13:42 ` Mikko Perttunen
2014-09-29 13:42 ` Mikko Perttunen
2014-09-29 13:42 ` Mikko Perttunen
2014-09-29 8:14 ` Peter De Schrijver
2014-09-29 8:14 ` Peter De Schrijver
2014-09-29 8:14 ` Peter De Schrijver
[not found] ` <5425CC6F.2020309-/1wQRMveznE@public.gmane.org>
2014-09-29 8:29 ` Thierry Reding
2014-09-29 8:29 ` Thierry Reding
2014-09-29 8:29 ` Thierry Reding
2014-09-29 13:37 ` Mikko Perttunen
2014-09-29 13:37 ` Mikko Perttunen
2014-09-29 14:17 ` [PATCH v7 " Mikko Perttunen
2014-09-29 14:17 ` Mikko Perttunen
2014-10-15 10:05 ` Mikko Perttunen
2014-10-15 10:05 ` Mikko Perttunen
[not found] ` <543E46DF.8060705-/1wQRMveznE@public.gmane.org>
2014-11-07 15:54 ` Eduardo Valentin
2014-11-07 15:54 ` Eduardo Valentin
2014-11-07 15:54 ` Eduardo Valentin
2014-11-08 1:11 ` Mikko Perttunen
2014-11-08 1:11 ` Mikko Perttunen
2014-11-08 1:11 ` Mikko Perttunen
2014-09-26 10:19 ` [PATCH v6 0/4] Tegra124 soctherm driver Thierry Reding
2014-09-26 10:19 ` Thierry Reding
2014-09-26 10:22 ` Mikko Perttunen
2014-09-26 10:22 ` Mikko Perttunen
[not found] ` <54253E7C.9080704-/1wQRMveznE@public.gmane.org>
2014-09-26 11:48 ` Thierry Reding
2014-09-26 11:48 ` Thierry Reding
2014-09-26 11:48 ` Thierry Reding
2014-09-26 12:00 ` Mikko Perttunen
2014-09-26 12:00 ` Mikko Perttunen
[not found] ` <5425554B.7060102-/1wQRMveznE@public.gmane.org>
2014-09-26 12:05 ` Thierry Reding
2014-09-26 12:05 ` Thierry Reding
2014-09-26 12:05 ` Thierry Reding
2014-09-26 12:09 ` Mikko Perttunen
2014-09-26 12:09 ` Mikko Perttunen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545A8452.2050404@wwwdotorg.org \
--to=swarren-3lzwwm7+weoh9zmkesr00q@public.gmane.org \
--cc=amartin-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=cyndis-/1wQRMveznE@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.