Problem with hangup of multiple calls

Problem with hangup of multiple calls

[Georg Chini]

[-- Attachment #1: Type: text/plain, Size: 433 bytes --]

Hello,

I am using ofono (compiled from git) and bluez 5.21 to access
my old Nokia 6230i. I have a problem, when I call two parties.
When one call is ended, I do not receive a dbus signal. As soon
as I hangup the second call, I get "CallRemoved" messages for
both calls, so the first signal is delayed until the second call is
finished.
Any idea why this happens or how to debug it further?

Regards
               Georg

Re: Problem with hangup of multiple calls

[Georg Chini]

[-- Attachment #1: Type: text/plain, Size: 819 bytes --]

On 16.08.2014 22:07, Georg Chini wrote:
> Hello,
>
> I am using ofono (compiled from git) and bluez 5.21 to access
> my old Nokia 6230i. I have a problem, when I call two parties.
> When one call is ended, I do not receive a dbus signal. As soon
> as I hangup the second call, I get "CallRemoved" messages for
> both calls, so the first signal is delayed until the second call is
> finished.
> Any idea why this happens or how to debug it further?
>

I asked the question above some time ago but never received
any reply. So I am asking again ...

Somewhat more detail: I tried to do some debugging and when
one call is on hold and the active call is hung up, I do not even
receive a CIEV in the HFP driver. So the signal must be dropped
on a lower level. Any ideas?

Regards
               Georg

Re: Problem with hangup of multiple calls

[Georg Chini]

[-- Attachment #1: Type: text/plain, Size: 986 bytes --]

On 09.11.2014 15:09, Georg Chini wrote:
> On 16.08.2014 22:07, Georg Chini wrote:
>> Hello,
>>
>> I am using ofono (compiled from git) and bluez 5.21 to access
>> my old Nokia 6230i. I have a problem, when I call two parties.
>> When one call is ended, I do not receive a dbus signal. As soon
>> as I hangup the second call, I get "CallRemoved" messages for
>> both calls, so the first signal is delayed until the second call is
>> finished.
>> Any idea why this happens or how to debug it further?
>>
>
> I asked the question above some time ago but never received
> any reply. So I am asking again ...
>
> Somewhat more detail: I tried to do some debugging and when
> one call is on hold and the active call is hung up, I do not even
> receive a CIEV in the HFP driver. So the signal must be dropped
> on a lower level. Any ideas?
>
One more fact: It works for a (second) incoming call as long as the
call is in "waiting" state.

Regards
              Georg