From: Eric Sandeen <sandeen@sandeen.net>
To: Eric Sandeen <sandeen@redhat.com>, xfs-oss <xfs@oss.sgi.com>
Cc: Zorro Lang <zlang@redhat.com>
Subject: Re: [PATCH] xfs_copy: fix ASSERT failure on 4k devices...
Date: Mon, 10 Nov 2014 18:37:33 -0600 [thread overview]
Message-ID: <54615A4D.2000703@sandeen.net> (raw)
In-Reply-To: <54613907.2000007@redhat.com>
Hm, realized that perhaps a more forceful $SUBJECT would have been better :)
-Eric
On 11/10/14 4:15 PM, Eric Sandeen wrote:
> After ffe9a9a xfsprogs: xfs_copy: fix data corruption of target,
> xfs_copy started hitting an ASSERT for a 4k sector / 4k blocksize
> filesystem:
>
> # dd if=/dev/zero of=test.img bs=1M count=1024
> # mkfs.xfs -s size=4096 test.img
> # xfs_copy test.img xfs.img
> xfs_copy: xfs_copy.c:720: main: Assertion `((((((xfs_daddr_t)(3 << (mp)->m_sectbb_log)) + 1) * (1<<9)) + first_residue) % source_blocksize) == 0' failed.
> Aborted
>
> I started digging through all the calculations below, and realized
> that in the end, all it wants is the first filesystem block after
> the AG header. XFS_AGFL_BLOCK(mp) + 1 suffices for this purpose;
> rip out the rest which seems overly complex and apparently bug-prone.
>
> I tested this by creating a 4g filesystem with combinations of
> sector & block size between 512 and 4k, copying in /lib/modules,
> running an xfs_copy of that, and running repair against the copy;
> it all looks good. It took a long time, but I will create a
> simpler/shorter xfstest based on this.
>
> Reported-by: Zorro Lang <zlang@redhat.com>
> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
> ---
>
> diff --git a/copy/xfs_copy.c b/copy/xfs_copy.c
> index 7ce5ec9..279527c 100644
> --- a/copy/xfs_copy.c
> +++ b/copy/xfs_copy.c
> @@ -475,7 +475,7 @@ main(int argc, char **argv)
> int open_flags;
> xfs_off_t pos, end_pos;
> size_t length;
> - int c, first_residue, tmp_residue;
> + int c;
> __uint64_t size, sizeb;
> __uint64_t numblocks = 0;
> int wblocks = 0;
> @@ -697,27 +697,13 @@ main(int argc, char **argv)
> ASSERT(source_blocksize % source_sectorsize == 0);
> ASSERT(source_sectorsize % BBSIZE == 0);
>
> - if (source_blocksize > source_sectorsize) {
> - /* get number of leftover sectors in last block of ag header */
> -
> - tmp_residue = ((XFS_AGFL_DADDR(mp) + 1) * BBSIZE)
> - % source_blocksize;
> - first_residue = (tmp_residue == 0) ? 0 :
> - source_blocksize - tmp_residue;
> - ASSERT(first_residue % source_sectorsize == 0);
> - } else if (source_blocksize == source_sectorsize) {
> - first_residue = 0;
> - } else {
> + if (source_blocksize < source_sectorsize) {
> do_log(_("Error: filesystem block size is smaller than the"
> " disk sectorsize.\nAborting XFS copy now.\n"));
> exit(1);
> }
>
> - first_agbno = (((XFS_AGFL_DADDR(mp) + 1) * BBSIZE)
> - + first_residue) / source_blocksize;
> - ASSERT(first_agbno != 0);
> - ASSERT(((((XFS_AGFL_DADDR(mp) + 1) * BBSIZE)
> - + first_residue) % source_blocksize) == 0);
> + first_agbno = XFS_AGFL_BLOCK(mp) + 1;
>
> /* now open targets */
>
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
>
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2014-11-11 0:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-10 22:15 [PATCH] xfs_copy: simplify first_agbno calculation Eric Sandeen
2014-11-11 0:37 ` Eric Sandeen [this message]
2014-11-11 13:37 ` Brian Foster
2014-11-11 16:01 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54615A4D.2000703@sandeen.net \
--to=sandeen@sandeen.net \
--cc=sandeen@redhat.com \
--cc=xfs@oss.sgi.com \
--cc=zlang@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.