From: Helge Deller <deller@gmx.de>
To: linux-serial@vger.kernel.org
Cc: linux-parisc <linux-parisc@vger.kernel.org>
Subject: serial console problem with kernel 3.18.0-rc4
Date: Tue, 11 Nov 2014 20:13:17 +0100 [thread overview]
Message-ID: <54625FCD.3070008@gmx.de> (raw)
While testing kernel 3.18-rc4 I'm facing a problem with serial console.
I'm seeing at bootup this message:
[ 17.724000] console [ttyS0] disabled
after that it's just hanging.
It seems as if ttyS0 is somehow being reprogrammed which then disturbs the
serial ports on the receiver side (in my case a HP PCI Diva Serial [GSP] Multiport UART).
Any idea what changed between 3.17 and 3.18 which have caused this behavior ?
Full log below.
Helge
serial driver: drivers/tty/serial/8250/8250_pci.c
PCI info:
00:04.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device 1283
Flags: medium devsel, IRQ 70
Memory at ffffffff80000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 0040 [size=64]
Capabilities: [48] Power Management version 2
Kernel driver in use: serial
dmesg after bootup:
[ 17.708000] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[ 17.724000] serial 0000:00:04.1: enabling device (0142 -> 0143)
[ 17.724000] console [ttyS0] disabled
[ 17.880000] serial 0000:00:04.1: ttyS0 at MMIO 0xffffffff80000000 (irq = 70, base_baud = 115200) is a 16550A
[ 17.996000] console [ttyS0] enabled
[ 38.888000] INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 1, t=5252 jiffies, g=-290, c=-291, q=2)
[ 38.888000] Task dump for CPU 3:
[ 38.888000] swapper/0 R running task 0 1 0 0x00000004
[ 38.888000] Backtrace:
[ 38.888000] [<0000000040200848>] vprintk_emit+0x570/0x5f8
[ 38.888000] [<0000000040200bdc>] printk+0x64/0x78
[ 38.888000] [<0000000040201fc0>] register_console+0x438/0x550
[ 38.888000] [<0000000040688bb8>] uart_add_one_port+0x400/0x5d0
[ 38.888000] [<000000004068e6d4>] serial8250_register_8250_port+0x3e4/0x448
[ 38.888000] [<0000000040695f44>] pciserial_init_ports+0x22c/0x2c8
[ 38.888000] [<0000000040696628>] pciserial_init_one+0x250/0x2e0
[ 38.888000] [<00000000405f3880>] pci_device_probe+0xb0/0x150
[ 38.888000] [<00000000406a8244>] driver_probe_device+0x204/0x570
[ 38.888000] [<00000000406a8728>] __driver_attach+0xe0/0x158
[ 38.888000] [<00000000406a4558>] bus_for_each_dev+0xd0/0x128
[ 38.888000] [<00000000406a76f8>] driver_attach+0x48/0x60
[ 38.888000] [<00000000406a6de8>] bus_add_driver+0x268/0x460
[ 38.888000] [<00000000406a915c>] driver_register+0x124/0x1d0
[ 38.888000] [<00000000405f336c>] __pci_register_driver+0x64/0x78
[ 38.888000] [<00000000401375e4>] serial_pci_driver_init+0x44/0x58
[ 59.084000] timer_interrupt(CPU 3): delayed! cycles 85EBC4C7D rem 2BAF83 next/now 2765C08677/276594D6F4
[ 59.140000] bootconsole [ttyB0] disabled
[ 59.144000] serial 0000:00:04.1: ttyS1 at MMIO 0xffffffff80000008 (irq = 70, base_baud = 115200) is a 16450
[ 59.164000] serial 0000:00:04.1: ttyS2 at MMIO 0xffffffff80000010 (irq = 70, base_baud = 115200) is a 16550A
next reply other threads:[~2014-11-11 19:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-11 19:13 Helge Deller [this message]
2015-01-01 1:33 ` serial console problem with kernel 3.18.0-rc4 James Bottomley
2015-01-01 1:33 ` James Bottomley
2015-01-01 4:56 ` Peter Hurley
2015-01-01 8:52 ` James Bottomley
2015-01-01 22:06 ` James Bottomley
2015-01-02 5:34 ` Sudip Mukherjee
2015-01-02 7:26 ` James Bottomley
2015-01-02 4:32 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54625FCD.3070008@gmx.de \
--to=deller@gmx.de \
--cc=linux-parisc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.