From: vikasm <vikas.manocha@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/4] add support for new arch stv0991
Date: Tue, 18 Nov 2014 10:17:08 -0800 [thread overview]
Message-ID: <546B8D24.20902@st.com> (raw)
In-Reply-To: <CAPnjgZ3C6z4T94yU3741ng5_2u1NU+ng77MuGjSTZfoPfF3=zg@mail.gmail.com>
Hello Simon,
On 11/17/2014 09:19 PM, Simon Glass wrote:
> Hi Vikas,
>
> On 18 November 2014 01:30, Vikas Manocha <vikas.manocha@st.com> wrote:
>> This patchset add support for new arch stv0991.
>>
>> Changes in v4:
>> - rebased to current master
>> - added maintainers info
>>
>> Changes in v3:
>> - removed period from commit messages
>>
>> Changes in v2:
>> - corrected files license to GPL-2.0+
>> - replaced printf() usage with puts() for string print
>> - sorted sourcing of board Kconfig
>>
>> Vikas Manocha (4):
>> stv0991: Add basic stv0991 architecture support
>> stv0991: enable ethernet support
>> stv0991: default + misc command configs enabled
>> stv0991: add maintainer information
> Can you please look at using driver model for this board? It would be
> particularly valuable since it looks like you are using the pl011 UART
> which has not previously been tested with driver model (and it seems
> you found some problems).
>
> To do this you probably only need to adjust a few defines and add
> platform data for serial. A patch for Raspberry Pi is here:
>
> http://patchwork.ozlabs.org/patch/392180/
Sure, Simon. Infact i was also planning to use the driver model.
Thanks for sharing the Raspberry patch link.
Rgds,
Vikas
>
>> MAINTAINERS | 6 +
>> arch/arm/Kconfig | 5 +
>> arch/arm/cpu/armv7/stv0991/Makefile | 9 ++
>> arch/arm/cpu/armv7/stv0991/clock.c | 41 +++++++
>> arch/arm/cpu/armv7/stv0991/lowlevel.S | 12 ++
>> arch/arm/cpu/armv7/stv0991/pinmux.c | 62 +++++++++++
>> arch/arm/cpu/armv7/stv0991/reset.c | 26 +++++
>> arch/arm/cpu/armv7/stv0991/timer.c | 114 +++++++++++++++++++
>> arch/arm/include/asm/arch-stv0991/gpio.h | 22 ++++
>> arch/arm/include/asm/arch-stv0991/hardware.h | 73 ++++++++++++
>> arch/arm/include/asm/arch-stv0991/stv0991_cgu.h | 116 ++++++++++++++++++++
>> arch/arm/include/asm/arch-stv0991/stv0991_creg.h | 95 ++++++++++++++++
>> arch/arm/include/asm/arch-stv0991/stv0991_defs.h | 16 +++
>> arch/arm/include/asm/arch-stv0991/stv0991_gpt.h | 43 ++++++++
>> arch/arm/include/asm/arch-stv0991/stv0991_periph.h | 44 ++++++++
>> arch/arm/include/asm/arch-stv0991/stv0991_wdru.h | 28 +++++
>> board/st/stv0991/Kconfig | 23 ++++
>> board/st/stv0991/MAINTAINERS | 5 +
>> board/st/stv0991/Makefile | 8 ++
>> board/st/stv0991/stv0991.c | 91 +++++++++++++++
>> configs/stv0991_defconfig | 3 +
>> include/configs/stv0991.h | 88 +++++++++++++++
>> 22 files changed, 930 insertions(+)
>> create mode 100644 arch/arm/cpu/armv7/stv0991/Makefile
>> create mode 100644 arch/arm/cpu/armv7/stv0991/clock.c
>> create mode 100644 arch/arm/cpu/armv7/stv0991/lowlevel.S
>> create mode 100644 arch/arm/cpu/armv7/stv0991/pinmux.c
>> create mode 100644 arch/arm/cpu/armv7/stv0991/reset.c
>> create mode 100644 arch/arm/cpu/armv7/stv0991/timer.c
>> create mode 100644 arch/arm/include/asm/arch-stv0991/gpio.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/hardware.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_creg.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_defs.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_periph.h
>> create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
>> create mode 100644 board/st/stv0991/Kconfig
>> create mode 100644 board/st/stv0991/MAINTAINERS
>> create mode 100644 board/st/stv0991/Makefile
>> create mode 100644 board/st/stv0991/stv0991.c
>> create mode 100644 configs/stv0991_defconfig
>> create mode 100644 include/configs/stv0991.h
> Regards,
> Simon
next prev parent reply other threads:[~2014-11-18 18:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-18 1:30 [U-Boot] [PATCH v4 0/4] add support for new arch stv0991 Vikas Manocha
2014-11-18 1:30 ` [U-Boot] [PATCH v4 1/4] stv0991: Add basic stv0991 architecture support Vikas Manocha
2014-11-18 7:21 ` Albert ARIBAUD
2014-11-18 18:08 ` vikasm
2014-11-18 1:30 ` [U-Boot] [PATCH v4 2/4] stv0991: enable ethernet support Vikas Manocha
2014-11-18 1:30 ` [U-Boot] [PATCH v4 3/4] stv0991: default + misc command configs enabled Vikas Manocha
2014-11-18 7:29 ` Albert ARIBAUD
2014-11-18 18:10 ` vikasm
2014-11-18 1:30 ` [U-Boot] [PATCH v4 4/4] stv0991: add maintainer information Vikas Manocha
2014-11-18 5:19 ` [U-Boot] [PATCH v4 0/4] add support for new arch stv0991 Simon Glass
2014-11-18 18:17 ` vikasm [this message]
2014-11-25 19:50 ` vikasm
2014-11-25 20:13 ` vikasm
2014-11-25 20:26 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546B8D24.20902@st.com \
--to=vikas.manocha@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.