Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Dmitry Tunin <hanipouspilot@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-wireless@vger.kernel.org
Subject: Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device
Date: Wed, 19 Nov 2014 09:46:38 +0300	[thread overview]
Message-ID: <546C3CCE.400@gmail.com> (raw)
In-Reply-To: <F01422F2-5F7C-406A-A06B-2C2CE96B9E3A@holtmann.org>

Hi Marcel,

Here is information from /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms


I hope this mail client is OK now.

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif  it was an AR3012 device,
but it works both ways. This is the right one.

Signed-off-by: Dmitry Tunin<hanipouspilot@gmail.com>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
      { USB_DEVICE(0x0CF3, 0x3002) },
      { USB_DEVICE(0x0CF3, 0xE019) },
      { USB_DEVICE(0x13d3, 0x3304) },
+    { USB_DEVICE(0x13d3, 0x3408) },

      /* Atheros AR9285 Malbec with sflash firmware */
      { USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
      { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
      { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
      { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+    { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

      /* Atheros AR9285 Malbec with sflash firmware */
      { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },


19.11.2014 01:56, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>> It is AR3011 device according to iProduct == 0.
>> So btusb should be blacklisted
>> I submitted a wrong patch before asif  it was an AR3012 device,
>> but it works both ways. This is the right one.
> include the device details from /sys/kernel/debug/usb/devices.
>
>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>> are */
> No idea what this are */ is.
>
>> ---
>>
>> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
>> index d85ced2..3b53116 100644
>> --- a/drivers/bluetooth/ath3k.c
>> +++ b/drivers/bluetooth/ath3k.c
>> @@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
>>   { USB_DEVICE(0x0CF3, 0x3002) },
>>   { USB_DEVICE(0x0CF3, 0xE019) },
>>   { USB_DEVICE(0x13d3, 0x3304) },
>> + { USB_DEVICE(0x13d3, 0x3408) },
>>
>>   /* Atheros AR9285 Malbec with sflash firmware */
>>   { USB_DEVICE(0x03F0, 0x311D) },
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index edfc17b..bbf5c1c 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
>>   { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
>>   { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
>>   { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },
> Fix whitespace here or use a proper mail client.
>
> Regards
>
> Marcel
>

next prev parent reply	other threads:[~2014-11-19  6:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-18 22:51 [PATCH v2] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin
2014-11-18 22:56 ` Marcel Holtmann
2014-11-19  6:46   ` Dmitry Tunin [this message]
2014-11-19  9:37     ` [PATCH v3] " Michel Memeteau - EKIMIA
2014-11-19  9:40       ` Michel Memeteau - EKIMIA
2014-11-19 10:06         ` Dmitry Tunin
2014-11-23 12:10           ` Dmitry Tunin
2014-11-19  9:52       ` Dmitry Tunin

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:d85ced2 dfblob:3b53116 dfblob:edfc17b dfblob:bbf5c1c )
 OR (
bs:"Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=546C3CCE.400@gmail.com \
    --to=hanipouspilot@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.