[PATCH v7 06/10] ARM: clocksource: add asm9260_timer driver

[daniel.lezcano@linaro.org (Daniel Lezcano)]

On 10/21/2014 09:14 AM, Oleksij Rempel wrote:
> In some cases asm9260 looks similar to iMX2x. One of exceptions is
> timer controller. So this patch introduces new driver for this special case.
>
> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>

Looks good to me.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> ---
>   drivers/clocksource/Kconfig         |   4 +
>   drivers/clocksource/Makefile        |   1 +
>   drivers/clocksource/asm9260_timer.c | 220 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 225 insertions(+)
>   create mode 100644 drivers/clocksource/asm9260_timer.c
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cfd6519..6a03d34 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -216,4 +216,8 @@ config CLKSRC_VERSATILE
>   	  ARM Versatile, RealView and Versatile Express reference
>   	  platforms.
>
> +config ASM9260_TIMER
> +	select CLKSRC_MMIO
> +	bool
> +
>   endmenu
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 7fd9fd1..fc93854 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -44,3 +44,4 @@ obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
>   obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
>   obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o
>   obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
> +obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
> diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
> new file mode 100644
> index 0000000..12cab34
> --- /dev/null
> +++ b/drivers/clocksource/asm9260_timer.c
> @@ -0,0 +1,220 @@
> +/*
> + * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/sched.h>
> +#include <linux/clk.h>
> +#include <linux/clocksource.h>
> +#include <linux/clockchips.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/bitops.h>
> +
> +#define DRIVER_NAME	"asm9260-timer"
> +
> +/*
> + * this device provide 4 offsets for each register:
> + * 0x0 - plain read write mode
> + * 0x4 - set mode, OR logic.
> + * 0x8 - clr mode, XOR logic.
> + * 0xc - togle mode.
> + */
> +#define SET_REG 4
> +#define CLR_REG 8
> +
> +#define HW_IR           0x0000 /* RW. Interrupt */
> +#define BM_IR_CR0	BIT(4)
> +#define BM_IR_MR3	BIT(3)
> +#define BM_IR_MR2	BIT(2)
> +#define BM_IR_MR1	BIT(1)
> +#define BM_IR_MR0	BIT(0)
> +
> +#define HW_TCR		0x0010 /* RW. Timer controller */
> +/* BM_C*_RST
> + * Timer Counter and the Prescale Counter are synchronously reset on the
> + * next positive edge of PCLK. The counters remain reset until TCR[1] is
> + * returned to zero. */
> +#define BM_C3_RST	BIT(7)
> +#define BM_C2_RST	BIT(6)
> +#define BM_C1_RST	BIT(5)
> +#define BM_C0_RST	BIT(4)
> +/* BM_C*_EN
> + * 1 - Timer Counter and Prescale Counter are enabled for counting
> + * 0 - counters are disabled */
> +#define BM_C3_EN	BIT(3)
> +#define BM_C2_EN	BIT(2)
> +#define BM_C1_EN	BIT(1)
> +#define BM_C0_EN	BIT(0)
> +
> +#define HW_DIR		0x0020 /* RW. Direction? */
> +/* 00 - count up
> + * 01 - count down
> + * 10 - ?? 2^n/2 */
> +#define BM_DIR_COUNT_UP		0
> +#define BM_DIR_COUNT_DOWN	1
> +#define BM_DIR0_SHIFT	0
> +#define BM_DIR1_SHIFT	4
> +#define BM_DIR2_SHIFT	8
> +#define BM_DIR3_SHIFT	12
> +#define BM_DIR_DEFAULT		(BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
> +				 BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
> +				 BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
> +				 BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
> +
> +#define HW_TC0		0x0030 /* RO. Timer counter 0 */
> +/* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
> + * interrupt. This registers can be used to detect overflow */
> +#define HW_TC1          0x0040
> +#define HW_TC2		0x0050
> +#define HW_TC3		0x0060
> +
> +#define HW_PR		0x0070 /* RW. prescaler */
> +#define BM_PR_DISABLE	0
> +#define HW_PC		0x0080 /* RO. Prescaler counter */
> +#define HW_MCR		0x0090 /* RW. Match control */
> +/* enable interrupt on match */
> +#define BM_MCR_INT_EN(n)	(1 << (n * 3 + 0))
> +/* enable TC reset on match */
> +#define BM_MCR_RES_EN(n)	(1 << (n * 3 + 1))
> +/* enable stop TC on match */
> +#define BM_MCR_STOP_EN(n)	(1 << (n * 3 + 2))
> +
> +#define HW_MR0		0x00a0 /* RW. Match reg */
> +#define HW_MR1		0x00b0
> +#define HW_MR2		0x00C0
> +#define HW_MR3		0x00D0
> +
> +#define HW_CTCR		0x0180 /* Counter control */
> +#define BM_CTCR0_SHIFT	0
> +#define BM_CTCR1_SHIFT	2
> +#define BM_CTCR2_SHIFT	4
> +#define BM_CTCR3_SHIFT	6
> +#define BM_CTCR_TM	0	/* Timer mode. Every rising PCLK edge. */
> +#define BM_CTCR_DEFAULT	(BM_CTCR_TM << BM_CTCR0_SHIFT | \
> +			 BM_CTCR_TM << BM_CTCR1_SHIFT | \
> +			 BM_CTCR_TM << BM_CTCR2_SHIFT | \
> +			 BM_CTCR_TM << BM_CTCR3_SHIFT)
> +
> +static struct asm9260_timer_priv {
> +	void __iomem *base;
> +	unsigned long ticks_per_jiffy;
> +} priv;
> +
> +static int asm9260_timer_set_next_event(unsigned long delta,
> +					 struct clock_event_device *evt)
> +{
> +	/* configure match count for TC0 */
> +	writel_relaxed(delta, priv.base + HW_MR0);
> +	/* enable TC0 */
> +	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
> +	return 0;
> +}
> +
> +static void asm9260_timer_set_mode(enum clock_event_mode mode,
> +				    struct clock_event_device *evt)
> +{
> +	/* stop timer0 */
> +	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
> +
> +	switch (mode) {
> +	case CLOCK_EVT_MODE_PERIODIC:
> +		/* disable reset and stop on match */
> +		writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
> +				priv.base + HW_MCR + CLR_REG);
> +		/* configure match count for TC0 */
> +		writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
> +		/* enable TC0 */
> +		writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
> +		break;
> +	case CLOCK_EVT_MODE_ONESHOT:
> +		/* enable reset and stop on match */
> +		writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
> +				priv.base + HW_MCR + SET_REG);
> +		break;
> +	default:
> +		break;
> +	}
> +}
> +
> +static struct clock_event_device event_dev = {
> +	.name		= DRIVER_NAME,
> +	.rating		= 200,
> +	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> +	.set_next_event	= asm9260_timer_set_next_event,
> +	.set_mode	= asm9260_timer_set_mode,
> +};
> +
> +static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
> +{
> +	struct clock_event_device *evt = dev_id;
> +
> +	evt->event_handler(evt);
> +
> +	writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/*
> + * ---------------------------------------------------------------------------
> + * Timer initialization
> + * ---------------------------------------------------------------------------
> + */
> +static void __init asm9260_timer_init(struct device_node *np)
> +{
> +	int irq;
> +	struct clk *clk;
> +	int ret;
> +	unsigned long rate;
> +
> +	priv.base = of_io_request_and_map(np, 0, DRIVER_NAME);
> +	if (!priv.base)
> +		panic("%s: unable to map resource", DRIVER_NAME);
> +
> +	clk = of_clk_get(np, 0);
> +
> +	ret = clk_prepare_enable(clk);
> +	if (ret)
> +		panic("Failed to enable clk!\n");
> +
> +	irq = irq_of_parse_and_map(np, 0);
> +	ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
> +			DRIVER_NAME, &event_dev);
> +	if (ret)
> +		panic("Failed to setup irq!\n");
> +
> +	/* set all timers for count-up */
> +	writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
> +	/* disable divider */
> +	writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
> +	/* make sure all timers use every rising PCLK edge. */
> +	writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
> +	/* enable interrupt for TC0 and clean setting for all other lines */
> +	writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
> +
> +	rate = clk_get_rate(clk);
> +	clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
> +			200, 32, clocksource_mmio_readl_up);
> +
> +	/* Seems like we can't use counter without match register even if
> +	 * actions for MR are disabled. So, set MR to max value. */
> +	writel_relaxed(0xffffffff, priv.base + HW_MR1);
> +	/* enable TC1 */
> +	writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
> +
> +	priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
> +	event_dev.cpumask = cpumask_of(0);
> +	clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
> +}
> +CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
> +		asm9260_timer_init);
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog