From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] help on using buildman
Date: Thu, 20 Nov 2014 10:47:13 -0800 [thread overview]
Message-ID: <546E3731.6080006@freescale.com> (raw)
Simon,
Can you shed some light on my trouble? I am trying to use buildman for
regression tests. I got inconsistency and am trying to find out why. Take one
example MPC832XEMDS_HOST_66 in this case (I randomly pick a failed board)
On one computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build
--force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
winegcc: gcc-4.5 failed
boards.cfg is up to date. Nothing to do.
Building 15 commits for 1 boards (1 thread, 4 jobs per thread)
01: ARM: atmel: add sama5d4 xplained ultra board support
02: qe: add u-qe support to arm board
03: qe: add qe support to ls1021aqds
04: qe: add qe support for ls1021a-twr board
05: arm: ls102xa: Fixed a register definition error
06: u_qe: add u_qe_upload_firmware for u_qe
07: powerpc: Move fsl_errata.h out of arch/powerpc
08: driver/usb/fsl: Make FSL USB driver common
09: drivers: usb: fsl: Define USB configs for LS102XA
10: ls1: config: Enable USB EHCI Host on LS1021AQDS
11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2
12: arm: ls102xa: Remove bit reversing for SCFG registers
13: ls102xa: ifc: nor: fix the write issue when bytes unaligned
14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board
15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
15 0 0 /15 MPC832XEMDS_HOST_66
No error.
On another computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build
--force-reconfig MPC832XEMDS_HOST_66 -se
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Summary of 15 commits for 1 boards (1 thread, 24 jobs per thread)
01: ARM: atmel: add sama5d4 xplained ultra board support
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
02: qe: add u-qe support to arm board
powerpc: MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
-make: *** [sub-make] Error 2
03: qe: add qe support to ls1021aqds
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
04: qe: add qe support for ls1021a-twr board
05: arm: ls102xa: Fixed a register definition error
powerpc: MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
-make: *** [sub-make] Error 2
06: u_qe: add u_qe_upload_firmware for u_qe
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
07: powerpc: Move fsl_errata.h out of arch/powerpc
08: driver/usb/fsl: Make FSL USB driver common
powerpc: MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
-make: *** [sub-make] Error 2
09: drivers: usb: fsl: Define USB configs for LS102XA
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
10: ls1: config: Enable USB EHCI Host on LS1021AQDS
powerpc: MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
-make: *** [sub-make] Error 2
11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
12: arm: ls102xa: Remove bit reversing for SCFG registers
13: ls102xa: ifc: nor: fix the write issue when bytes unaligned
powerpc: MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
-make: *** [sub-make] Error 2
14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
powerpc: MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
-make: *** [sub-make] Error 2
You can see one error comes on and off. How can I debug it? I don't use python
enough to diagnose the code. Is there a way to dump the make command to check?
York
next reply other threads:[~2014-11-20 18:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 18:47 York Sun [this message]
2014-11-20 19:13 ` [U-Boot] help on using buildman Simon Glass
2014-11-20 19:22 ` York Sun
2014-11-20 19:46 ` York Sun
2014-11-20 19:51 ` Simon Glass
2014-11-20 19:55 ` York Sun
2014-11-20 20:10 ` Simon Glass
2014-11-20 20:18 ` York Sun
2014-11-20 21:04 ` York Sun
2014-11-20 21:33 ` York Sun
2014-11-20 21:34 ` York Sun
2014-11-20 21:46 ` Simon Glass
2014-11-20 22:25 ` York Sun
2014-11-20 23:35 ` York Sun
2014-11-21 4:14 ` Simon Glass
2014-11-21 4:42 ` Masahiro Yamada
2014-11-21 4:53 ` Masahiro Yamada
2014-11-21 4:55 ` York Sun
2014-11-21 6:00 ` Masahiro Yamada
[not found] ` <E5C75E70-6F62-4E5C-9861-1D903D9BBFC9@freescale.com>
2014-11-21 6:47 ` York Sun
2014-11-21 17:14 ` York Sun
2014-11-21 17:22 ` York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546E3731.6080006@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.