* [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable @ 2014-11-17 13:33 ` Antoine Tenart 0 siblings, 0 replies; 18+ messages in thread From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw) To: linux-arm-kernel Hello, As asked by Arnd in the Berlin USB thread[1], do not select automatically RESET_CONTROLLER when using ARCH_BERLIN but let it be user-selectable. To ensure the Berlin USB PHY driver still works with this change, make it depending on RESET_CONTROLLER. Antoine [1] https://lkml.org/lkml/2014/11/14/415 Antoine Tenart (2): phy: berlin_usb: depends on RESET_CONTROLLER ARM: berlin: do not select RESET_CONTROLLER arch/arm/mach-berlin/Kconfig | 1 - drivers/phy/Kconfig | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) -- 2.1.0 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable @ 2014-11-17 13:33 ` Antoine Tenart 0 siblings, 0 replies; 18+ messages in thread From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw) To: sebastian.hesselbarth, kishon, p.zabel Cc: Antoine Tenart, arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel Hello, As asked by Arnd in the Berlin USB thread[1], do not select automatically RESET_CONTROLLER when using ARCH_BERLIN but let it be user-selectable. To ensure the Berlin USB PHY driver still works with this change, make it depending on RESET_CONTROLLER. Antoine [1] https://lkml.org/lkml/2014/11/14/415 Antoine Tenart (2): phy: berlin_usb: depends on RESET_CONTROLLER ARM: berlin: do not select RESET_CONTROLLER arch/arm/mach-berlin/Kconfig | 1 - drivers/phy/Kconfig | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) -- 2.1.0 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER 2014-11-17 13:33 ` Antoine Tenart @ 2014-11-17 13:33 ` Antoine Tenart -1 siblings, 0 replies; 18+ messages in thread From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw) To: linux-arm-kernel The Berlin USB PHY driver uses the Berlin reset controller unconditionally. Make it depending on RESET_CONTROLLER. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- drivers/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index b6da75f563e7..38ca6ff00aef 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -17,7 +17,7 @@ config GENERIC_PHY config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF select GENERIC_PHY help Enable this to support the USB PHY on Marvell Berlin SoCs. -- 2.1.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER @ 2014-11-17 13:33 ` Antoine Tenart 0 siblings, 0 replies; 18+ messages in thread From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw) To: sebastian.hesselbarth, kishon, p.zabel Cc: Antoine Tenart, arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel The Berlin USB PHY driver uses the Berlin reset controller unconditionally. Make it depending on RESET_CONTROLLER. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- drivers/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index b6da75f563e7..38ca6ff00aef 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -17,7 +17,7 @@ config GENERIC_PHY config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF select GENERIC_PHY help Enable this to support the USB PHY on Marvell Berlin SoCs. -- 2.1.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER 2014-11-17 13:33 ` Antoine Tenart @ 2014-11-18 19:39 ` Sebastian Hesselbarth -1 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-18 19:39 UTC (permalink / raw) To: linux-arm-kernel On 17.11.2014 14:33, Antoine Tenart wrote: > The Berlin USB PHY driver uses the Berlin reset controller > unconditionally. Make it depending on RESET_CONTROLLER. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > --- > drivers/phy/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index b6da75f563e7..38ca6ff00aef 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -17,7 +17,7 @@ config GENERIC_PHY > > config PHY_BERLIN_USB > tristate "Marvell Berlin USB PHY Driver" > - depends on ARCH_BERLIN && HAS_IOMEM && OF > + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > select GENERIC_PHY > help > Enable this to support the USB PHY on Marvell Berlin SoCs. > ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER @ 2014-11-18 19:39 ` Sebastian Hesselbarth 0 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-18 19:39 UTC (permalink / raw) To: Antoine Tenart, kishon, p.zabel Cc: arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel On 17.11.2014 14:33, Antoine Tenart wrote: > The Berlin USB PHY driver uses the Berlin reset controller > unconditionally. Make it depending on RESET_CONTROLLER. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > --- > drivers/phy/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index b6da75f563e7..38ca6ff00aef 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -17,7 +17,7 @@ config GENERIC_PHY > > config PHY_BERLIN_USB > tristate "Marvell Berlin USB PHY Driver" > - depends on ARCH_BERLIN && HAS_IOMEM && OF > + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > select GENERIC_PHY > help > Enable this to support the USB PHY on Marvell Berlin SoCs. > ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER 2014-11-18 19:39 ` Sebastian Hesselbarth @ 2014-11-19 6:09 ` Kishon Vijay Abraham I -1 siblings, 0 replies; 18+ messages in thread From: Kishon Vijay Abraham I @ 2014-11-19 6:09 UTC (permalink / raw) To: linux-arm-kernel Hi, On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: > On 17.11.2014 14:33, Antoine Tenart wrote: >> The Berlin USB PHY driver uses the Berlin reset controller >> unconditionally. Make it depending on RESET_CONTROLLER. >> >> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > > Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > >> --- >> drivers/phy/Kconfig | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index b6da75f563e7..38ca6ff00aef 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -17,7 +17,7 @@ config GENERIC_PHY >> >> config PHY_BERLIN_USB phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my inbox. Care to send them to me? Thanks Kishon ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER @ 2014-11-19 6:09 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 18+ messages in thread From: Kishon Vijay Abraham I @ 2014-11-19 6:09 UTC (permalink / raw) To: Sebastian Hesselbarth, Antoine Tenart, p.zabel Cc: arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel Hi, On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: > On 17.11.2014 14:33, Antoine Tenart wrote: >> The Berlin USB PHY driver uses the Berlin reset controller >> unconditionally. Make it depending on RESET_CONTROLLER. >> >> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > > Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > >> --- >> drivers/phy/Kconfig | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index b6da75f563e7..38ca6ff00aef 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -17,7 +17,7 @@ config GENERIC_PHY >> >> config PHY_BERLIN_USB phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my inbox. Care to send them to me? Thanks Kishon ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER 2014-11-19 6:09 ` Kishon Vijay Abraham I @ 2014-11-20 21:46 ` Sebastian Hesselbarth -1 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-20 21:46 UTC (permalink / raw) To: linux-arm-kernel On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: >> On 17.11.2014 14:33, Antoine Tenart wrote: >>> The Berlin USB PHY driver uses the Berlin reset controller >>> unconditionally. Make it depending on RESET_CONTROLLER. >>> >>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> >> >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> >>> --- >>> drivers/phy/Kconfig | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index b6da75f563e7..38ca6ff00aef 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -17,7 +17,7 @@ config GENERIC_PHY >>> >>> config PHY_BERLIN_USB > > phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my > inbox. Care to send them to me? Kishon, phy-berlin-usb has been part of chipidea generic phy patch set for a while now. It looks like Antoine simply forgot to put you on Cc at least for v8 of it. As all other patches of that patch set have already been taken, I'll squash this patch into the two remaining ones from Antoine and send phy-berlin-usb patches in a second. Sebastian ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER @ 2014-11-20 21:46 ` Sebastian Hesselbarth 0 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-20 21:46 UTC (permalink / raw) To: Kishon Vijay Abraham I, Antoine Tenart, p.zabel Cc: arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: >> On 17.11.2014 14:33, Antoine Tenart wrote: >>> The Berlin USB PHY driver uses the Berlin reset controller >>> unconditionally. Make it depending on RESET_CONTROLLER. >>> >>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> >> >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> >>> --- >>> drivers/phy/Kconfig | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index b6da75f563e7..38ca6ff00aef 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -17,7 +17,7 @@ config GENERIC_PHY >>> >>> config PHY_BERLIN_USB > > phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my > inbox. Care to send them to me? Kishon, phy-berlin-usb has been part of chipidea generic phy patch set for a while now. It looks like Antoine simply forgot to put you on Cc at least for v8 of it. As all other patches of that patch set have already been taken, I'll squash this patch into the two remaining ones from Antoine and send phy-berlin-usb patches in a second. Sebastian ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER 2014-11-19 6:09 ` Kishon Vijay Abraham I @ 2014-11-20 21:55 ` Sebastian Hesselbarth -1 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-20 21:55 UTC (permalink / raw) To: linux-arm-kernel On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: >> On 17.11.2014 14:33, Antoine Tenart wrote: >>> The Berlin USB PHY driver uses the Berlin reset controller >>> unconditionally. Make it depending on RESET_CONTROLLER. >>> >>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> >> >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> >>> --- >>> drivers/phy/Kconfig | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index b6da75f563e7..38ca6ff00aef 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -17,7 +17,7 @@ config GENERIC_PHY >>> >>> config PHY_BERLIN_USB > > phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my > inbox. Care to send them to me? Kishon, phy-berlin-usb has been part of chipidea generic phy patch set for a while now. It looks like Antoine simply forgot to put you on Cc at least for v8 of it. As all other patches of that patch set have already been taken, I'll squash this patch into the two remaining ones from Antoine and send phy-berlin-usb patches in a second. Sebastian ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER @ 2014-11-20 21:55 ` Sebastian Hesselbarth 0 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-20 21:55 UTC (permalink / raw) To: Kishon Vijay Abraham I, Antoine Tenart, p.zabel Cc: arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: >> On 17.11.2014 14:33, Antoine Tenart wrote: >>> The Berlin USB PHY driver uses the Berlin reset controller >>> unconditionally. Make it depending on RESET_CONTROLLER. >>> >>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> >> >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> >>> --- >>> drivers/phy/Kconfig | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index b6da75f563e7..38ca6ff00aef 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -17,7 +17,7 @@ config GENERIC_PHY >>> >>> config PHY_BERLIN_USB > > phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my > inbox. Care to send them to me? Kishon, phy-berlin-usb has been part of chipidea generic phy patch set for a while now. It looks like Antoine simply forgot to put you on Cc at least for v8 of it. As all other patches of that patch set have already been taken, I'll squash this patch into the two remaining ones from Antoine and send phy-berlin-usb patches in a second. Sebastian ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER 2014-11-19 6:09 ` Kishon Vijay Abraham I @ 2014-11-20 21:59 ` Sebastian Hesselbarth -1 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-20 21:59 UTC (permalink / raw) To: linux-arm-kernel On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: >> On 17.11.2014 14:33, Antoine Tenart wrote: >>> The Berlin USB PHY driver uses the Berlin reset controller >>> unconditionally. Make it depending on RESET_CONTROLLER. >>> >>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> >> >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> >>> --- >>> drivers/phy/Kconfig | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index b6da75f563e7..38ca6ff00aef 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -17,7 +17,7 @@ config GENERIC_PHY >>> >>> config PHY_BERLIN_USB > > phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my > inbox. Care to send them to me? Kishon, phy-berlin-usb is part of a larger patch set moving chipidea usb to generic phy. As all other patches of that set have already been taken, I squashed this into one of the two remaining patches from the said set. I just sent out the now two remaining patches. Looks like Antoine simply forgot to put you on Cc, at least for v8 of the patches. Sebastian ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER @ 2014-11-20 21:59 ` Sebastian Hesselbarth 0 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-20 21:59 UTC (permalink / raw) To: Kishon Vijay Abraham I, Antoine Tenart, p.zabel Cc: arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote: >> On 17.11.2014 14:33, Antoine Tenart wrote: >>> The Berlin USB PHY driver uses the Berlin reset controller >>> unconditionally. Make it depending on RESET_CONTROLLER. >>> >>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> >> >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> >>> --- >>> drivers/phy/Kconfig | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index b6da75f563e7..38ca6ff00aef 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -17,7 +17,7 @@ config GENERIC_PHY >>> >>> config PHY_BERLIN_USB > > phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my > inbox. Care to send them to me? Kishon, phy-berlin-usb is part of a larger patch set moving chipidea usb to generic phy. As all other patches of that set have already been taken, I squashed this into one of the two remaining patches from the said set. I just sent out the now two remaining patches. Looks like Antoine simply forgot to put you on Cc, at least for v8 of the patches. Sebastian ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER 2014-11-17 13:33 ` Antoine Tenart @ 2014-11-17 13:33 ` Antoine Tenart -1 siblings, 0 replies; 18+ messages in thread From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw) To: linux-arm-kernel RESET_CONTROLLER is meant to be user-selectable. To respect that, do not select it automatically when using ARCH_BERLIN. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- arch/arm/mach-berlin/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 5803f773a065..51582c73a53f 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -7,7 +7,6 @@ menuconfig ARCH_BERLIN select DW_APB_ICTL select DW_APB_TIMER_OF select PINCTRL - select RESET_CONTROLLER if ARCH_BERLIN -- 2.1.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER @ 2014-11-17 13:33 ` Antoine Tenart 0 siblings, 0 replies; 18+ messages in thread From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw) To: sebastian.hesselbarth, kishon, p.zabel Cc: Antoine Tenart, arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel RESET_CONTROLLER is meant to be user-selectable. To respect that, do not select it automatically when using ARCH_BERLIN. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- arch/arm/mach-berlin/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 5803f773a065..51582c73a53f 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -7,7 +7,6 @@ menuconfig ARCH_BERLIN select DW_APB_ICTL select DW_APB_TIMER_OF select PINCTRL - select RESET_CONTROLLER if ARCH_BERLIN -- 2.1.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER 2014-11-17 13:33 ` Antoine Tenart @ 2014-11-18 19:28 ` Sebastian Hesselbarth -1 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-18 19:28 UTC (permalink / raw) To: linux-arm-kernel On 17.11.2014 14:33, Antoine Tenart wrote: > RESET_CONTROLLER is meant to be user-selectable. To respect that, > do not select it automatically when using ARCH_BERLIN. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Applied to berlin/soc. Thanks! > --- > arch/arm/mach-berlin/Kconfig | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig > index 5803f773a065..51582c73a53f 100644 > --- a/arch/arm/mach-berlin/Kconfig > +++ b/arch/arm/mach-berlin/Kconfig > @@ -7,7 +7,6 @@ menuconfig ARCH_BERLIN > select DW_APB_ICTL > select DW_APB_TIMER_OF > select PINCTRL > - select RESET_CONTROLLER > > if ARCH_BERLIN > > ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER @ 2014-11-18 19:28 ` Sebastian Hesselbarth 0 siblings, 0 replies; 18+ messages in thread From: Sebastian Hesselbarth @ 2014-11-18 19:28 UTC (permalink / raw) To: Antoine Tenart, kishon, p.zabel Cc: arnd, alexandre.belloni, thomas.petazzoni, zmxu, jszhang, linux-arm-kernel, linux-kernel On 17.11.2014 14:33, Antoine Tenart wrote: > RESET_CONTROLLER is meant to be user-selectable. To respect that, > do not select it automatically when using ARCH_BERLIN. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Applied to berlin/soc. Thanks! > --- > arch/arm/mach-berlin/Kconfig | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig > index 5803f773a065..51582c73a53f 100644 > --- a/arch/arm/mach-berlin/Kconfig > +++ b/arch/arm/mach-berlin/Kconfig > @@ -7,7 +7,6 @@ menuconfig ARCH_BERLIN > select DW_APB_ICTL > select DW_APB_TIMER_OF > select PINCTRL > - select RESET_CONTROLLER > > if ARCH_BERLIN > > ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2014-11-20 21:59 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-11-17 13:33 [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable Antoine Tenart 2014-11-17 13:33 ` Antoine Tenart 2014-11-17 13:33 ` [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER Antoine Tenart 2014-11-17 13:33 ` Antoine Tenart 2014-11-18 19:39 ` Sebastian Hesselbarth 2014-11-18 19:39 ` Sebastian Hesselbarth 2014-11-19 6:09 ` Kishon Vijay Abraham I 2014-11-19 6:09 ` Kishon Vijay Abraham I 2014-11-20 21:46 ` Sebastian Hesselbarth 2014-11-20 21:46 ` Sebastian Hesselbarth 2014-11-20 21:55 ` Sebastian Hesselbarth 2014-11-20 21:55 ` Sebastian Hesselbarth 2014-11-20 21:59 ` Sebastian Hesselbarth 2014-11-20 21:59 ` Sebastian Hesselbarth 2014-11-17 13:33 ` [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER Antoine Tenart 2014-11-17 13:33 ` Antoine Tenart 2014-11-18 19:28 ` Sebastian Hesselbarth 2014-11-18 19:28 ` Sebastian Hesselbarth
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.