All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Hannes Reinecke <hare@suse.de>,
	James Bottomley <jbottomley@parallels.com>
Cc: Christoph Hellwig <hch@lst.de>,
	Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
	"David S. Miller" <davem@davemloft.net>,
	linux-scsi@vger.kernel.org
Subject: Re: [PATCH 06/12] esp_scsi: use FIFO for command submission
Date: Fri, 21 Nov 2014 14:09:21 +0100	[thread overview]
Message-ID: <546F3981.7000507@redhat.com> (raw)
In-Reply-To: <1416573716-73890-7-git-send-email-hare@suse.de>



On 21/11/2014 13:41, Hannes Reinecke wrote:
> Using DMA for command submission has the drawback that it might
> generate additional DMA completion interrupts after the command
> has been submitted to the device.
> Additionally the am53c974 has a design flaw causing it
> to generate spurious interrupts even though DMA completion
> interrupts are not enabled.
> This can be avoided by using the FIFO for command submission.
> 
> Signed-off-by: Hannes Reinecke <hare@suse.de>
> ---
>  drivers/scsi/esp_scsi.c | 46 +++++++++++++++++++++++++++++-----------------
>  drivers/scsi/esp_scsi.h |  1 +
>  2 files changed, 30 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
> index 0ad0f08..2a3277d 100644
> --- a/drivers/scsi/esp_scsi.c
> +++ b/drivers/scsi/esp_scsi.c
> @@ -143,6 +143,24 @@ void scsi_esp_cmd(struct esp *esp, u8 val)
>  }
>  EXPORT_SYMBOL(scsi_esp_cmd);
>  
> +static void esp_send_dma_cmd(struct esp *esp, int len, int max_len, int cmd)
> +{
> +	if (esp->flags & ESP_FLAG_USE_FIFO) {
> +		int i;
> +
> +		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
> +		for (i = 0; i < len; i++)
> +			esp_write8(esp->command_block[i], ESP_FDATA);
> +		scsi_esp_cmd(esp, cmd);
> +	} else {
> +		if (esp->rev == FASHME)
> +			scsi_esp_cmd(esp, ESP_CMD_FLUSH);
> +		cmd |= ESP_CMD_DMA;
> +		esp->ops->send_dma_cmd(esp, esp->command_block_dma,
> +				       len, max_len, 0, cmd);
> +	}
> +}
> +
>  static void esp_event(struct esp *esp, u8 val)
>  {
>  	struct esp_event_ent *p;
> @@ -650,10 +668,7 @@ static void esp_autosense(struct esp *esp, struct esp_cmd_entry *ent)
>  
>  	val = (p - esp->command_block);
>  
> -	if (esp->rev == FASHME)
> -		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
> -	esp->ops->send_dma_cmd(esp, esp->command_block_dma,
> -			       val, 16, 0, ESP_CMD_DMA | ESP_CMD_SELA);
> +	esp_send_dma_cmd(esp, val, 16, ESP_CMD_SELA);
>  }
>  
>  static struct esp_cmd_entry *find_and_prep_issuable_command(struct esp *esp)
> @@ -789,12 +804,12 @@ build_identify:
>  	}
>  
>  	if (!(esp->flags & ESP_FLAG_DOING_SLOWCMD)) {
> -		start_cmd = ESP_CMD_DMA | ESP_CMD_SELA;
> +		start_cmd = ESP_CMD_SELA;
>  		if (ent->tag[0]) {
>  			*p++ = ent->tag[0];
>  			*p++ = ent->tag[1];
>  
> -			start_cmd = ESP_CMD_DMA | ESP_CMD_SA3;
> +			start_cmd = ESP_CMD_SA3;
>  		}
>  
>  		for (i = 0; i < cmd->cmd_len; i++)
> @@ -814,7 +829,7 @@ build_identify:
>  			esp->msg_out_len += 2;
>  		}
>  
> -		start_cmd = ESP_CMD_DMA | ESP_CMD_SELAS;
> +		start_cmd = ESP_CMD_SELAS;
>  		esp->select_state = ESP_SELECT_MSGOUT;
>  	}
>  	val = tgt;
> @@ -834,10 +849,7 @@ build_identify:
>  		printk("]\n");
>  	}
>  
> -	if (esp->rev == FASHME)
> -		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
> -	esp->ops->send_dma_cmd(esp, esp->command_block_dma,
> -			       val, 16, 0, start_cmd);
> +	esp_send_dma_cmd(esp, val, 16, start_cmd);
>  }
>  
>  static struct esp_cmd_entry *esp_get_ent(struct esp *esp)
> @@ -1646,7 +1658,7 @@ static int esp_msgin_process(struct esp *esp)
>  
>  static int esp_process_event(struct esp *esp)
>  {
> -	int write;
> +	int write, i;
>  
>  again:
>  	write = 0;
> @@ -1872,6 +1884,10 @@ again:
>  			if (esp->msg_out_len == 1) {
>  				esp_write8(esp->msg_out[0], ESP_FDATA);
>  				scsi_esp_cmd(esp, ESP_CMD_TI);
> +			} else if (esp->flags & ESP_FLAG_USE_FIFO) {
> +				for (i = 0; i < esp->msg_out_len; i++)
> +					esp_write8(esp->msg_out[i], ESP_FDATA);
> +				scsi_esp_cmd(esp, ESP_CMD_TI);
>  			} else {
>  				/* Use DMA. */
>  				memcpy(esp->command_block,
> @@ -1949,11 +1965,7 @@ again:
>  	case ESP_EVENT_CMD_START:
>  		memcpy(esp->command_block, esp->cmd_bytes_ptr,
>  		       esp->cmd_bytes_left);
> -		if (esp->rev == FASHME)
> -			scsi_esp_cmd(esp, ESP_CMD_FLUSH);
> -		esp->ops->send_dma_cmd(esp, esp->command_block_dma,
> -				       esp->cmd_bytes_left, 16, 0,
> -				       ESP_CMD_DMA | ESP_CMD_TI);
> +		esp_send_dma_cmd(esp, esp->cmd_bytes_left, 16, ESP_CMD_TI);
>  		esp_event(esp, ESP_EVENT_CMD_DONE);
>  		esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
>  		break;
> diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
> index 975d293..27dcaf8 100644
> --- a/drivers/scsi/esp_scsi.h
> +++ b/drivers/scsi/esp_scsi.h
> @@ -478,6 +478,7 @@ struct esp {
>  #define ESP_FLAG_WIDE_CAPABLE	0x00000008
>  #define ESP_FLAG_QUICKIRQ_CHECK	0x00000010
>  #define ESP_FLAG_DISABLE_SYNC	0x00000020
> +#define ESP_FLAG_USE_FIFO	0x00000040
>  
>  	u8			select_state;
>  #define ESP_SELECT_NONE		0x00 /* Not selecting */
> 

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

  reply	other threads:[~2014-11-21 13:09 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-21 12:41 [PATCHv2 00/12] Re-implement am53c974 driver Hannes Reinecke
2014-11-21 12:41 ` [PATCH 01/12] esp_scsi: spellcheck 'driver' Hannes Reinecke
2014-11-21 17:42   ` David Miller
2014-11-21 12:41 ` [PATCH 02/12] esp_scsi: make number of tags configurable Hannes Reinecke
2014-11-21 17:42   ` David Miller
2014-11-21 12:41 ` [PATCH 03/12] esp_scsi: convert to dev_printk Hannes Reinecke
2014-11-21 17:43   ` David Miller
2014-11-21 12:41 ` [PATCH 04/12] esp_scsi: debug event and command Hannes Reinecke
2014-11-21 17:43   ` David Miller
2014-11-21 12:41 ` [PATCH 05/12] esp_scsi: read status registers Hannes Reinecke
2014-11-21 17:44   ` David Miller
2014-11-21 12:41 ` [PATCH 06/12] esp_scsi: use FIFO for command submission Hannes Reinecke
2014-11-21 13:09   ` Paolo Bonzini [this message]
2014-11-21 17:42   ` David Miller
2014-11-21 12:41 ` [PATCH 07/12] scsi: add 'am53c974' driver Hannes Reinecke
2014-11-24 13:36   ` Christoph Hellwig
2014-11-24 13:42   ` Paolo Bonzini
2014-11-24 13:50   ` Christoph Hellwig
2014-11-24 14:01     ` Hannes Reinecke
2014-11-21 12:41 ` [PATCH 08/12] am53c974: BLAST residual handling Hannes Reinecke
2014-11-21 13:09   ` Paolo Bonzini
2014-11-21 17:45   ` David Miller
2014-11-21 12:41 ` [PATCH 09/12] esp: correctly detect am53c974 Hannes Reinecke
2014-11-21 17:46   ` David Miller
2014-11-21 12:41 ` [PATCH 10/12] esp_scsi: let DMA driver provide a config2 value Hannes Reinecke
2014-11-21 17:47   ` David Miller
2014-11-21 12:41 ` [PATCH 11/12] esp: enable CONFIG2_FENAB for am53c974 Hannes Reinecke
2014-11-21 13:10   ` Paolo Bonzini
2014-11-21 17:47   ` David Miller
2014-11-21 12:41 ` [PATCH 12/12] Replace tmscsim by am53c974 Hannes Reinecke
2014-11-23 13:22   ` Guennadi Liakhovetski
2014-11-23 18:45     ` David Miller
2014-11-24  8:14 ` [PATCHv2 00/12] Re-implement am53c974 driver Christoph Hellwig
2014-11-24  8:23   ` Hannes Reinecke
2014-11-25 22:10   ` Guennadi Liakhovetski
  -- strict thread matches above, loose matches on Subject: below --
2014-11-24 14:37 [PATCHv3 " Hannes Reinecke
2014-11-24 14:37 ` [PATCH 06/12] esp_scsi: use FIFO for command submission Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=546F3981.7000507@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=davem@davemloft.net \
    --cc=g.liakhovetski@gmx.de \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=jbottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.