From: Hans Verkuil <hverkuil@xs4all.nl>
To: Gregor Jasny <gjasny@googlemail.com>,
linux-media@vger.kernel.org,
Mauro Carvalho Chehab <m.chehab@samsung.com>,
Hans de Goede <hdegoede@redhat.com>
Subject: Re: v4l-utils stable release 1.6.1
Date: Fri, 21 Nov 2014 20:37:58 +0100 [thread overview]
Message-ID: <546F9496.9020207@xs4all.nl> (raw)
In-Reply-To: <546E093D.4030203@googlemail.com>
Hi Gregor,
On 11/20/2014 04:31 PM, Gregor Jasny wrote:
> Hello,
>
> do you consider something from these commits as important enough for a
> bugfix release?
>
> Thanks,
> Gregor
>
>> Akihiro Tsukada (9):
>> libdvbv5, dvbv5-scan: generalize channel duplication check
>> libdvbv5: add as many channels as possible in scanning DVB-T2
>> libdvbv5: wrong frequency in the output of satellite delsys scans
>> libdvbv5: add support for ISDB-S tuning
>> libdvbv5: add support for ISDB-S scanning
>> libdvbv5: add COUNTRY property
>> v4l-utils/libdvbv5: restore deleted functions to keep API/ABI compatible
>> v4l-utils/libdvbv5: fix memory leak in dvb_guess_user_country()
>> v4l-utils/libdvbv5: add gconv module for the text conversions of ISDB-S/T.
>>
>> Gregor Jasny (7):
>> Start v4l-utils 1.7.0 development cycle
>> man: remove duplicate backslash from NAME section
>> man: Use Unicode character for ellipsis and fall back to ...
>> man: add generated files to .gitignore
>> libdvbv5: Remove stray semicolon
>> v4l2-compliance: Explicitely link against rt library
>> v4l2-ctl: Explicitely link against rt library
>>
>> Hans Verkuil (10):
>> qv4l2/v4l2-ctl: fix buffer overrun in vivid-tpg.
This one should go in (critical bug fix).
>> v4l2-ctl: fix sliced vbi mode parsing
And this one.
>> v4l2-compliance: when streaming used at least 2 buffers.
>> v4l2-compliance: add initial checks for VIDIOC_QUERY_EXT_CTRL
>> v4l2-ctl: add support for U32 control type.
>> v4l2-ctl: fix array handling
And these two for v4l2-ctl.
Sorry for being late with replying.
Regards,
Hans
>> v4l2-compliance: allow the V4L2_IN_ST_NO_SYNC status flag.
>> qv4l2: add single step support
>> qv4l2: don't select alsa device for video output.
>> v4l2-compliance: select(): split "ret <= 0" test in two
>>
>> Hans de Goede (2):
>> rc_keymaps: allwinner: S/KEY_HOME/KEY_HOMEPAGE/
>> v4lconvert: Fix decoding of jpeg data with no vertical sub-sampling
>>
>> Mauro Carvalho Chehab (41):
>> libdvbv5: properly represent Satellite frequencies
>> README: better document the package
>> libdvbv5: Fix some Doxygen warnings at dvb-fe.h
>> Doxygen: Document libdvbv5 countries.h
>> configure.ac: Fix gconv compilation with 64 bits
>> parse_tcpdump_log.pl: only adjust direction for control EP
>> contrib: add a parser for af9035
>> parse_af9035.pl: properly handle URB errors
>> parse_af9035.pl: Add two other commands from ITE driver
>> parse_af9035.pl: add arguments to show timestamp and debug
>> parse_af9035.pl: group write/read URBs
>> parse_af9035.pl: create a routine to print send/race
>> parse_af9035.pl: print read/write as C lines
>> parse_af9035.pl: add support for firmware commands
>> parse_af9035.pl: fix firmware write size
>> ir-keytable: fix a regression introduced by fe2aa5f767eba
>> gen_keytables.pl: Fix a regression at RC map file generation
>> rc: Update the protocol name at RC6 tables
>> rc_maps.cfg: reorder entries alphabetically
>> rc: sync with Kernel
>> rc: copy userspace-only maps to a separate dir
>> README: Add the steps needed to syncronize with the Kernel tree
>> vivid-tpg.h.patch: update to match current upstream tree
>> Synchronize with the Kernel
>> parse_af9035.pl: proper handle when stack is not filled
>> parse_af9035.pl: add support for CMD_IR_GET
>> parse_af9035.pl: add options to hide part of the messages
>> parse_af9035.pl: Add firmware boot message to the parser
>> parse_af9035.pl: improve IR handling
>> parse_af9035.pl: add support for generic I2C read/write
>> parse_af9035.pl: better handle the read data
>> parse_af9035.pl: allow to hide parsing errors
>> parse_af9035.pl: add support for standard I2C commands
>> parse_af9035.pl: some cleanups
>> parse_af9035.pl: Fix decoding order at I2C read/write
>> parse_af9035.pl: Fix size on rd/wr regs prints
>> parse_af9035.pl: Fix some hide conditions
>> parse_af9035.pl: Improve argument handling
>> libdvbv5: add experimental DTMB support
>> parse_tcpdump_log.pl: simplify non-control data
>> parse_tcpdump_log.pl: remove some leftovers
>>
>> Niels Ole Salscheider (1):
>> qv4l2: Fix out-of-source build
>>
>> Patrick Boettcher (4):
>> parse_tcpdump_log.pl: skip filtered frames and remove them from pending
>> parse_tcpdump_log.pl: show transfer-direction for non-ctrl-transfers
>> parse_tcpdump_log.pl: add external frame_processor-option
>> parse_tcpdump_log.pl: remove --all option which was not documented and not working as expected
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-11-21 19:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 15:31 v4l-utils stable release 1.6.1 Gregor Jasny
2014-11-20 16:15 ` Mauro Carvalho Chehab
2014-11-20 20:22 ` Hans de Goede
2014-11-21 19:37 ` Hans Verkuil [this message]
2014-11-21 20:03 ` v4l-utils stable release 1.6.2 Gregor Jasny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546F9496.9020207@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=gjasny@googlemail.com \
--cc=hdegoede@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.