From: Dmitry Tunin <hanipouspilot@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth <linux-bluetooth@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device
Date: Sun, 23 Nov 2014 18:28:14 +0300 [thread overview]
Message-ID: <5471FD0E.4060305@gmail.com> (raw)
In-Reply-To: <4BD80C85-0288-404D-AB39-485359414DC9@holtmann.org>
Finally I figured out how to set up the mailer not to spoil everything.
Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
This bluetooth module requires loading patch and sysconfig by ath3k driver.
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
---
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..086240c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3432) },
/* Atheros AR5BBU12 with sflash firmware */
@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..091c813 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
--
23.11.2014 17:56, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>>
>> /sys/kernel/debug/usb/devices
>>
>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=13d3 ProdID=3408 Rev= 0.02
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> Signed-off-by: Dmitry Tunin<hanipouspilot@gmail.com>
>
> space between the name and the email address.
>
>>
>> ---
>>
>> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
>> index d85ced2..086240c 100644
>> --- a/drivers/bluetooth/ath3k.c
>> +++ b/drivers/bluetooth/ath3k.c
>> @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
>> { USB_DEVICE(0x13d3, 0x3375) },
>> { USB_DEVICE(0x13d3, 0x3393) },
>> { USB_DEVICE(0x13d3, 0x3402) },
>> + { USB_DEVICE(0x13d3, 0x3408) },
>> { USB_DEVICE(0x13d3, 0x3432) },
>
> And your mail client messes up spaces vs tabs here.
>
>>
>> /* Atheros AR5BBU12 with sflash firmware */
>> @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
>> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>>
>> /* Atheros AR5BBU22 with sflash firmware */
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index edfc17b..091c813 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
>> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>>
>> /* Atheros AR5BBU12 with sflash firmware */
>
> Regards
>
> Marcel
>
next prev parent reply other threads:[~2014-11-23 15:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-23 12:15 [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin
2014-11-23 14:56 ` Marcel Holtmann
2014-11-23 15:28 ` Dmitry Tunin [this message]
2014-11-24 16:14 ` Dmitry Tunin
2014-11-25 1:40 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5471FD0E.4060305@gmail.com \
--to=hanipouspilot@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.