All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kever Yang <kever.yang@rock-chips.com>
To: Roger Chen <roger.chen@rock-chips.com>, heiko@sntech.de
Cc: peppe.cavallaro@st.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	mark.yao@rock-chips.com, eddie.cai@rock-chips.com
Subject: Re: [PATCH 3/4] GMAC: dts: add gmac info for rk3288
Date: Tue, 25 Nov 2014 17:55:53 +0800	[thread overview]
Message-ID: <54745229.2040503@rock-chips.com> (raw)
In-Reply-To: <1416906536-26158-1-git-send-email-roger.chen@rock-chips.com>

Hi Roger,

The Subject should use below prefix:
ARM: dts: rockchip: add gmac info for rk3288

On 11/25/2014 05:08 PM, Roger Chen wrote:
> add gmac info in rk3288.dtsi for GMAC driver
>
> Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
> ---
>   arch/arm/boot/dts/rk3288.dtsi |   59 +++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 59 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 0f50d5d..949675d 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -137,6 +137,13 @@
>   		#clock-cells = <0>;
>   	};
>   
> +	ext_gmac: external-gmac-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "ext_gmac";
> +		#clock-cells = <0>;
> +	};
> +
I'm not sure Heiko will happy with both add the new clock source and
gmac node in these patch.

>   	timer {
>   		compatible = "arm,armv7-timer";
>   		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> @@ -490,6 +497,25 @@
>   		reg = <0xff740000 0x1000>;
>   	};
>   
> +	gmac: eth@ff290000 {
> +		compatible = "rockchip,rk3288-gmac";
> +		reg = <0xff290000 0x10000>;
> +		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;  /*irq=59*/
> +		interrupt-names = "macirq";
> +		rockchip,grf = <&grf>;
> +		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_PLL>,
> +			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
> +			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
> +			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
> +		clock-names = "stmmaceth", "clk_mac_pll",
> +			"mac_clk_rx", "mac_clk_tx",
> +			"clk_mac_ref", "clk_mac_refout",
> +			"aclk_mac", "pclk_mac";
> +		phy-mode = "rgmii";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&rgmii_pin /*&rmii_pin*/>;
> +	};
> +
The controller dts node should be sort by the base address, I'm sure 
this is in a
wrong place.

- Kever
>   	cru: clock-controller@ff760000 {
>   		compatible = "rockchip,rk3288-cru";
>   		reg = <0xff760000 0x1000>;
> @@ -1040,5 +1066,38 @@
>   				rockchip,pins = <7 23 3 &pcfg_pull_none>;
>   			};
>   		};
> +
> +		gmac {
> +			rgmii_pin: rgmii-pins {
> +				rockchip,pins = <3 30 3 &pcfg_pull_none>,
> +						<3 31 3 &pcfg_pull_none>,
> +						<3 26 3 &pcfg_pull_none>,
> +						<3 27 3 &pcfg_pull_none>,
> +						<3 28 3 &pcfg_pull_none>,
> +						<3 29 3 &pcfg_pull_none>,
> +						<3 24 3 &pcfg_pull_none>,
> +						<3 25 3 &pcfg_pull_none>,
> +						<4 0 3 &pcfg_pull_none>,
> +						<4 5 3 &pcfg_pull_none>,
> +						<4 6 3 &pcfg_pull_none>,
> +						<4 9 3 &pcfg_pull_none>,
> +						<4 4 3 &pcfg_pull_none>,
> +						<4 1 3 &pcfg_pull_none>,
> +						<4 3 3 &pcfg_pull_none>;
> +			};
> +
> +			rmii_pin: rmii-pins {
> +				rockchip,pins = <3 30 3 &pcfg_pull_none>,
> +						<3 31 3 &pcfg_pull_none>,
> +						<3 28 3 &pcfg_pull_none>,
> +						<3 29 3 &pcfg_pull_none>,
> +						<4 0 3 &pcfg_pull_none>,
> +						<4 5 3 &pcfg_pull_none>,
> +						<4 4 3 &pcfg_pull_none>,
> +						<4 1 3 &pcfg_pull_none>,
> +						<4 2 3 &pcfg_pull_none>,
> +						<4 3 3 &pcfg_pull_none>;
> +			};
> +		};
>   	};
>   };


  reply	other threads:[~2014-11-25  9:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-25  9:08 [PATCH 3/4] GMAC: dts: add gmac info for rk3288 Roger Chen
2014-11-25  9:55 ` Kever Yang [this message]
2014-11-25 10:12   ` Heiko Stübner
2014-11-25 13:40 ` Sergei Shtylyov
2014-11-25 14:39   ` Heiko Stübner
2014-11-26  2:49     ` Roger
2014-11-26  8:47       ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54745229.2040503@rock-chips.com \
    --to=kever.yang@rock-chips.com \
    --cc=eddie.cai@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.yao@rock-chips.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=roger.chen@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.