Re: [PATCH] imx6qdl-sabrelite: DT: Add I2C2/3 and HDMI support

[Gary Bisson <bisson.gary@gmail.com>]

Hi Eric,

On 12/02/2014 12:11 PM, Eric Nelson wrote:
> Hi Gary,
>
> On 12/02/2014 12:52 PM, Gary Bisson wrote:
>> Hi Fabio,
>>
>> On Tue, Dec 02, 2014 at 05:17:29PM -0200, Fabio Estevam wrote:
>>> On Tue, Dec 2, 2014 at 5:14 PM, Gary Bisson <bisson.gary@gmail.com> wrote:
>>>
>>>> I ported those changes already during my testing. Then I've tried a Nitrogen
>>>> board directly and got the same results.
>>> Can you share your full log (from U-boot to the kernel)?
>> I've attached both my full log and the EDID I read once booted up. The
>> log shows that the fb0 modes seems not to reflect what should be
>> supported.
>>
> What tree did you pull this kernel from? I'm not finding commit 4e03159
> on linux-next or torvalds/linux.git.

This is the linux-stable git I use. However the 4e03159 is the SHA1 id 
of my patch for the T1.0 which is actually based on 009d0431 (linux 
3.18-rc7).
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/

>> As a FYI, I've used a Nitrogen6-rev2 (SoC T1.2) for this test.
>>
> I should have read this before responding to your earlier message.

No problem. Could you share your command line? Do you see any 
differences between your log and mine?

Also, do you plan on submitting your sabrelite patches to the lkml?

Thanks,
Gary